Download or read book Control Techniques Applied to Ship Motion Control written by Mohammed Tariq Sharif and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control techniques applied to integrated ship motion control written by Mohammed Tariq Sharif and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ship Motion Control written by Tristan Perez and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: engineers into a single volume whilst concentrating on two important research control design problems: autopilots with rudder-roll stabilization and fin and combined rudder-fin stabilization. He has been guided by some of the leading marine control academics, in particular Mogens Blanke and Thor Fossen; indeed Chapters 3 and 4 on kinematics and kinetics of ship motion are jointly authored with Professor Fossen. There are some 240 cited references – an invaluable resource for interested readers. The volume is likely to appeal to a wide range of readers who will each be able to extract something different from the various parts of the monograph. Part I has some four chapters on the modelling fundamentals including kinematics, dynamics and actuators. Part II is a very useful survey of the ship roll stabilization problem and how ship roll performance is measured and assessed. This clearly motivates the human necessity for roll-reduction and roll stabilization. Parts III and IV move on to the control systems aspects of the various stabilization designs. Valuable material here includes a study of system performance limitations as caused by the presence of non-minimum phase characteristics and actuator saturation. Chapter 10 has an interesting historical review of these marine control problems stretching back some thirty-years into the 1970s.
Download or read book Advanced Control Techniques for Motion Control Problem written by Shahid Parvez and published by . This book was released on 2003 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Motion planning and feedback control techniques with applications to long tractor trailer vehicles written by Oskar Ljungqvist and published by Linköping University Electronic Press. This book was released on 2020-04-20 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades, improved sensor and hardware technologies as well as new methods and algorithms have made self-driving vehicles a realistic possibility in the near future. At the same time, there has been a growing demand within the transportation sector to increase efficiency and to reduce the environmental impact related to transportation of people and goods. Therefore, many leading automotive and technology companies have turned their attention towards developing advanced driver assistance systems and self-driving vehicles. Autonomous vehicles are expected to have their first big impact in closed environments, such as mines, harbors, loading and offloading sites. In such areas, the legal requirements are less restrictive and the surrounding environment is more controlled and predictable compared to urban areas. Expected positive outcomes include increased productivity and safety, reduced emissions and the possibility to relieve the human from performing complex or dangerous tasks. Within these sites, tractor-trailer vehicles are frequently used for transportation. These vehicles are composed of several interconnected vehicle segments, and are therefore large, complex and unstable while reversing. This thesis addresses the problem of designing efficient motion planning and feedback control techniques for such systems. The contributions of this thesis are within the area of motion planning and feedback control for long tractor-trailer combinations operating at low-speeds in closed and unstructured environments. It includes development of motion planning and feedback control frameworks, structured design tools for guaranteeing closed-loop stability and experimental validation of the proposed solutions through simulations, lab and field experiments. Even though the primary application in this work is tractor-trailer vehicles, many of the proposed approaches can with some adjustments also be used for other systems, such as drones and ships. The developed sampling-based motion planning algorithms are based upon the probabilistic closed-loop rapidly exploring random tree (CL-RRT) algorithm and the deterministic lattice-based motion planning algorithm. It is also proposed to use numerical optimal control offline for precomputing libraries of optimized maneuvers as well as during online planning in the form of a warm-started optimization step. To follow the motion plan, several predictive path-following control approaches are proposed with different computational complexity and performance. Common for these approaches are that they use a path-following error model of the vehicle for future predictions and are tailored to operate in series with a motion planner that computes feasible paths. The design strategies for the path-following approaches include linear quadratic (LQ) control and several advanced model predictive control (MPC) techniques to account for physical and sensing limitations. To strengthen the practical value of the developed techniques, several of the proposed approaches have been implemented and successfully demonstrated in field experiments on a full-scale test platform. To estimate the vehicle states needed for control, a novel nonlinear observer is evaluated on the full-scale test vehicle. It is designed to only utilize information from sensors that are mounted on the tractor, making the system independent of any sensor mounted on the trailer. Under de senaste årtiondena har utvecklingen av sensor- och hårdvaruteknik gått i en snabb takt, samtidigt som nya metoder och algoritmer har introducerats. Samtidigt ställs det stora krav på transportsektorn att öka effektiviteten och minska miljöpåverkan vid transporter av både människor och varor. Som en följd av detta har många ledande fordonstillverkare och teknikföretag börjat satsat på att utveckla avancerade förarstödsystem och självkörande fordon. Även forskningen inom autonoma fordon har under de senaste årtiondena kraftig ökat då en rad tekniska problem återstår att lösas. Förarlösa fordon förväntas få sitt första stora genombrott i slutna miljöer, såsom gruvor, hamnar, lastnings- och lossningsplatser. I sådana områden är lagstiftningen mindre hård jämfört med stadsområden och omgivningen är mer kontrollerad och förutsägbar. Några av de förväntade positiva effekterna är ökad produktivitet och säkerhet, minskade utsläpp och möjligheten att avlasta människor från att utföra svåra eller farliga uppgifter. Inom dessa platser används ofta lastbilar med olika släpvagnskombinationer för att transportera material. En sådan fordonskombination är uppbyggd av flera ihopkopplade moduler och är således utmanande att backa då systemet är instabilt. Detta gör det svårt att utforma ramverk för att styra sådana system vid exempelvis autonom backning. Självkörande fordon är mycket komplexa system som består av en rad olika komponenter vilka är designade för att lösa separata delproblem. Två viktiga komponenter i ett självkörande fordon är dels rörelseplaneraren som har i uppgift att planera hur fordonet ska röra sig för att på ett säkert sätt nå ett överordnat mål, och dels den banföljande regulatorn vars uppgift är att se till att den planerade manövern faktiskt utförs i praktiken trots störningar och modellfel. I denna avhandling presenteras flera olika algoritmer för att planera och utföra komplexa manövrar för lastbilar med olika typer av släpvagnskombinationer. De presenterade algoritmerna är avsedda att användas som avancerade förarstödsystem eller som komponenter i ett helt autonomt system. Även om den primära applikationen i denna avhandling är lastbilar med släp, kan många av de förslagna algoritmerna även användas för en rad andra system, så som drönare och båtar. Experimentell validering är viktigt för att motivera att en föreslagen algoritm är användbar i praktiken. I denna avhandling har flera av de föreslagna planerings- och reglerstrategierna implementerats på en småskalig testplattform och utvärderats i en kontrollerad labbmiljö. Utöver detta har även flera av de föreslagna ramverken implementerats och utvärderats i fältexperiment på en fullskalig test-plattform som har utvecklats i samarbete med Scania CV. Här utvärderas även en ny metod för att skatta släpvagnens beteende genom att endast utnyttja information från sensorer monterade på lastbilen, vilket gör det föreslagna ramverket oberoende av sensorer monterade på släpvagnen.
Download or read book Motion Control Systems written by Asif Sabanovic and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion Control Systems is concerned with design methods that support the never-ending requirements for faster and more accurate control of mechanical motion. The book presents material that is fundamental, yet at the same time discusses the solution of complex problems in motion control systems. Methods presented in the book are based on the authors' original research results. Mathematical complexities are kept to a required minimum so that practicing engineers as well as students with a limited background in control may use the book. It is unique in presenting know-how accumulated through work on very diverse problems into a comprehensive unified approach suitable for application in high demanding, high-tech products. Major issues covered include motion control ranging from simple trajectory tracking and force control, to topics related to haptics, bilateral control with and without delay in measurement and control channels, as well as control of nonredundant and redundant multibody systems. Provides a consistent unified theoretical framework for motion control design Offers graduated increase in complexity and reinforcement throughout the book Gives detailed explanation of underlying similarities and specifics in motion control Unified treatment of single degree-of-freedom and multibody systems Explains the fundamentals through implementation examples Based on classroom-tested materials and the authors' original research work Written by the leading researchers in sliding mode control (SMC) and disturbance observer (DOB) Accompanying lecture notes for instructors Simulink and MATLAB® codes available for readers to download Motion Control Systemsis an ideal textbook for a course on motion control or as a reference for post-graduates and researchers in robotics and mechatronics. Researchers and practicing engineers will also find the techniques helpful in designing mechanical motion systems.
Download or read book Centralized and Automatic Controls in Ships written by D Gray and published by Elsevier. This book was released on 2014-06-28 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centralized and Automatic Controls in Ships provide a non-mathematical basic introduction to the subject of control engineering applied in the marine field. This book is composed of 20 chapters that cover the basic principles of the equipment in ships. The opening chapters deal with ship components, construction, and commissioning routine for certain automated plant. The next chapters consider the basic principles of automatic control and controllers. These topics are followed by discussions on logic units and data processing equipment, other control elements, steam turbines, and diesel engines. Other chapters illustrate the application of control techniques to the major areas of the ship’s machinery. The final chapters examine ship and ship’s control system commissioning and maintenance. This book is an invaluable source for marine engineers and marine engineering students.
Download or read book Techniques for Ship Handling and Bridge Team Management written by Hiroaki Kobayashi and published by Routledge. This book was released on 2019-11-06 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hiroaki Kobayashi has trained 1500 mariners in ship handling over twenty years and he has systematized the methods of safe navigation into nine elemental techniques. Taking a rigorous and scientific look at good practice and attitudes, good seamanship can be viewed as a series of concrete technical functions, which can be in terms of competencies. By giving proper attention to human factors the conditions for maintaining system safety can be defined, and the interaction of human competencies and environmental conditions and their effects on system safety can be recognised. System safety in turn depends on good bridge team management, with particular emphasis on communication, cooperation and leadership – communication for the exchange of information, cooperation to smooth team activities, and leadership to ensure that each member of the team performs successfully.
Download or read book Handbook of Marine Craft Hydrodynamics and Motion Control written by Thor I. Fossen and published by John Wiley & Sons. This book was released on 2021-03-22 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of MARINE CRAFT HYDRODYNAMICS AND MOTION CONTROL The latest tools for analysis and design of advanced GNC systems Handbook of Marine Craft Hydrodynamics and Motion Control is an extensive study of the latest research in hydrodynamics, guidance, navigation, and control systems for marine craft. The text establishes how the implementation of mathematical models and modern control theory can be used for simulation and verification of control systems, decision-support systems, and situational awareness systems. Coverage includes hydrodynamic models for marine craft, models for wind, waves and ocean currents, dynamics and stability of marine craft, advanced guidance principles, sensor fusion, and inertial navigation. This important book includes the latest tools for analysis and design of advanced GNC systems and presents new material on unmanned underwater vehicles, surface craft, and autonomous vehicles. References and examples are included to enable engineers to analyze existing projects before making their own designs, as well as MATLAB scripts for hands-on software development and testing. Highlights of this Second Edition include: Topical case studies and worked examples demonstrating how you can apply modeling and control design techniques to your own designs A Github repository with MATLAB scripts (MSS toolbox) compatible with the latest software releases from Mathworks New content on mathematical modeling, including models for ships and underwater vehicles, hydrostatics, and control forces and moments New methods for guidance and navigation, including line-of-sight (LOS) guidance laws for path following, sensory systems, model-based navigation systems, and inertial navigation systems This fully revised Second Edition includes innovative research in hydrodynamics and GNC systems for marine craft, from ships to autonomous vehicles operating on the surface and under water. Handbook of Marine Craft Hydrodynamics and Motion Control is a must-have for students and engineers working with unmanned systems, field robots, autonomous vehicles, and ships. MSS toolbox: https://github.com/cybergalactic/mss Lecture notes: https://www.fossen.biz/wiley Author’s home page: https://www.fossen.biz
Download or read book State space Modeling and Optimal Control of Ship Motions in a Seastate written by Talha Ulusoy and published by . This book was released on 2006 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) The development from first principles of a reliable ship motion control simulation method based on SWAN and its coupling with LQ controllers used to actively regulate the angle of attack of lifting appendages, circumvents the need to perform sea trials or model experiments that are harder, time-consuming and expensive to carry out. The performance of the method is illustrated for a catamaran vessel fitted with bow and stern hydrofoils. Simulations of the vessel motions were performed with and without the effect of the controller in regular and random waves. It is concluded that the combination of the proposed state-space model with the LQ controller was very effective in reducing the undesired motions of the vessel in waves over a wide range of wave frequencies and ship speeds.
Download or read book Handbook of Marine Craft Hydrodynamics and Motion Control written by Thor I. Fossen and published by John Wiley & Sons. This book was released on 2021-04-19 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of MARINE CRAFT HYDRODYNAMICS AND MOTION CONTROL The latest tools for analysis and design of advanced GNC systems Handbook of Marine Craft Hydrodynamics and Motion Control is an extensive study of the latest research in hydrodynamics, guidance, navigation, and control systems for marine craft. The text establishes how the implementation of mathematical models and modern control theory can be used for simulation and verification of control systems, decision-support systems, and situational awareness systems. Coverage includes hydrodynamic models for marine craft, models for wind, waves and ocean currents, dynamics and stability of marine craft, advanced guidance principles, sensor fusion, and inertial navigation. This important book includes the latest tools for analysis and design of advanced GNC systems and presents new material on unmanned underwater vehicles, surface craft, and autonomous vehicles. References and examples are included to enable engineers to analyze existing projects before making their own designs, as well as MATLAB scripts for hands-on software development and testing. Highlights of this Second Edition include: Topical case studies and worked examples demonstrating how you can apply modeling and control design techniques to your own designs A Github repository with MATLAB scripts (MSS toolbox) compatible with the latest software releases from Mathworks New content on mathematical modeling, including models for ships and underwater vehicles, hydrostatics, and control forces and moments New methods for guidance and navigation, including line-of-sight (LOS) guidance laws for path following, sensory systems, model-based navigation systems, and inertial navigation systems This fully revised Second Edition includes innovative research in hydrodynamics and GNC systems for marine craft, from ships to autonomous vehicles operating on the surface and under water. Handbook of Marine Craft Hydrodynamics and Motion Control is a must-have for students and engineers working with unmanned systems, field robots, autonomous vehicles, and ships. MSS toolbox: https://github.com/cybergalactic/mss Lecture notes: https://www.fossen.biz/wiley Author’s home page: https://www.fossen.biz
Download or read book Control of Ships and Underwater Vehicles written by Khac Duc Do and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most ocean vessels are underactuated but control of their motion in the real ocean environment is essential. Starting with a review of the background on ocean-vessel dynamics and nonlinear control theory, the authors’ systematic approach is based on various nontrivial coordinate transformations coupled with advanced nonlinear control design methods. This strategy is then used for the development and analysis of a number of ocean-vessel control systems with the aim of achieving advanced motion control tasks including stabilization, trajectory-tracking, path-tracking and path-following. Control of Ships and Underwater Vehicles offers the reader: - new results in the nonlinear control of underactuated ocean vessels; - efficient designs for the implementation of controllers on underactuated ocean vessels; - numerical simulations and real-time implementations of the control systems designed on a scale-model ship for each controller developed to illustrate their effectiveness and afford practical guidance.
Download or read book Design and Assessment of Ship Motion Control Systems with Advanced Numerical Simulation Tools written by and published by . This book was released on 2004 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Motion Control of Functionally Related Systems written by Tarik Uzunović and published by CRC Press. This book was released on 2020-01-27 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the development of design techniques for controlling motion of mechanical systems which are employed to execute certain tasks acting collaboratively. The book introduces unified control design procedure for functionally related systems. The controllers for many different tasks in motion control can be successfully designed by applying the proposed simple procedure. The book gives an overview of the control methods appearing in the motion control area and the detailed design procedures for the class of systems that are required to execute certain task together. Tasks can generally be divided in their components, denoted as functions in the book. It is shown how dynamics of those tasks can be described. Based on the presented description, several control methods were discussed. Applicability of the introduced control design approach was demonstrated in subsequent chapters for various tasks.
Download or read book Ship Motion Control Using a Multivariable Approach written by G. N. Roberts and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Fuzzy Controller for Integrated Ship Motion Control written by G. N. Roberts and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Marine Simulation and Ship Manoeuvrability written by M.S. Chislett and published by Routledge. This book was released on 2021-10-01 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time, interactive ship simulators limped onto the scene, in the wake of flight simulators, some years ago. The maritime industries have a long history of conservatism, but this is now changing rapidly. The information age has also swept over ships and shipping, and has been taken to heart to such an extent that, for example, flight simulators now cooperate with ship simulators and import useful new concepts and methodologies. The more than 50 papers contained in this book show what and why. Although traditionally conservative, the marine world is also traditionally international and this has not changed. The papers in the book are by leading authors from all over the world and provide a detailed snap-shot of the rapidly advancing state-of-the-art, together with pointers to the future. The overall theme of MARSIM '96 and therefore also of this book is: Vessel manouevrability and marine simulation research, training and assessment, and includes original papers on topics such as bridge resource management, distant learning and simulators coupled via The Internet, virtual reality, neural networks, rudder-propeller hydrodynamics, prime mover models, squat in shallow water, and many more.
