Download or read book Control of Forced Vibration in Machine Tool metal Cutting Systems written by Theodore R. Comstock and published by . This book was released on 1967 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project is engaged in a program of research which is directed at the study of the mechanism of forced vibrations in machine tool-metal cutting systems. Analytical methods, test and specification techniques have been developed that should significantly aid machine tool manufacturers in the design of essentially vibration-free machine tools for given cutting operations. The types of disturbances which cause forced vibrations in machine tools are described and categorized. The detrimental effects upon performances, which these disturbances have during cutting operations, are discussed. An attempt is made to show that the problem of forced vibrations in metal cutting systems can be generalized and simplified to a very large extent. The analytical methods to be used in this general approach are developed, and the experimental results obtained therefrom are discussed. In order to accomplish the objectives of this program the study of the mechanism of forced vibrations was divided into two main areas. The first of these areas is concerned with the effects of forced vibration due to variations in cutting depth and disturbances from internal and external forces. The remaining phase of this program is concerned with the effects of forced vibration caused by the transmission of forces through the foundation. (Author).
Download or read book Effect and Control of Chatter Vibrations in Machine Tool Process written by and published by . This book was released on 1962 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect and Control of Chatter Vibrations in Machine Tool Process written by Gerald W. Long and published by . This book was released on 1968 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1967 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Abstracts of AF Materials Laboratory Reports written by Air Force Materials Laboratory (U.S.) and published by . This book was released on 1968 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical reports published by the Air Force Materials Laboratory during the period 1 January 1967-31 December 1967 are abstracted herein and indexed by branches of the laboratory, technical subject matter, investigator, project monitor and contractor. Reports on research conducted by the Air Force Materials Laboratory personnel as well as that conducted on contract are included.
Download or read book Manufacturing Automation written by Yusuf Altintas and published by Cambridge University Press. This book was released on 2012-01-16 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is widely used in producing manufactured products. The technology has advanced considerably along with new materials, computers and sensors. This new edition considers the scientific principles of metal cutting and their practical application to manufacturing problems. It begins with metal cutting mechanics, principles of vibration and experimental modal analysis applied to solving shop floor problems. There is in-depth coverage of chatter vibrations, a problem experienced daily by manufacturing engineers. Programming, design and automation of CNC (computer numerical control) machine tools, NC (numerical control) programming and CAD/CAM technology are discussed. The text also covers the selection of drive actuators, feedback sensors, modelling and control of feed drives, the design of real time trajectory generation and interpolation algorithms and CNC-oriented error analysis in detail. Each chapter includes examples drawn from industry, design projects and homework problems. This is ideal for advanced undergraduate and graduate students and also practising engineers.
Download or read book Control of Cutting Vibration and Machining Instability written by C. Steve Suh and published by John Wiley & Sons. This book was released on 2013-08-01 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents new developments on machine tool vibration control based on discontinuous dynamical systems Machining instability is a topical area, and there are a wide range of publications that cover the topic. However, many of these previous studies have started by assuming that the behavior of the system can be linearised. Meanwhile, there are many recent advances in the fields of signal processing, nonlinear dynamics, and nonlinear control, all of which are relevant to the machining stability problem. This book establishes the fundamentals of cutting mechanics and machine tool dynamics in the simultaneous time-frequency domain. The new nonlinear control theory developed by the authors that facilitates simultaneous control of vibration amplitude in the time-domain and spectral response in the frequency-domain provides the foundation for the development of a controller architecture universally viable for the control of dynamic instability including bifurcation and chaos. Once parameters underlying the coupling, interaction, and evolution of different cutting states and between the tool and workpiece are established, they can then be incorporated into the architecture to create a control methodology that mitigate machining instability and enable robust, chatter-free machine tool design applicable in particular to high speed micro- and nano-machining. Presents new developments on machine tool vibration control based on discontinuous dynamical systems Provides a clear and concise approach to the understanding and control of machine tool and workpiece vibrations from an alternative view, contributing to an in-depth understanding of cutting dynamics and robust control of machining instability Equips the reader with the knowledge to understand the dynamics of cutting and operation of machine-tool systems in different conditions as well as the concept of cutting instability control Includes data examples in MATLAB coding
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Metal Cutting Theory written by Hanmin Shi and published by Springer. This book was released on 2018-02-27 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the author’s lifetime achievements, offering new perspectives and approaches in the field of metal cutting theory and its applications. The topics discussed include Non-Euclidian Geometry of Cutting Tools, Non-free Cutting Mechanics and Non-Linear Machine Tool Dynamics, applying non-linear science/complexity to machining, and all the achievements and their practical significance have been theoretically proved and experimentally verified.
Download or read book Machine Tool Vibrations and Cutting Dynamics written by Brandon C. Gegg and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Machine Tool Vibrations and Cutting Dynamics” covers the fundamentals of cutting dynamics from the perspective of discontinuous systems theory. It shows the reader how to use coupling, interaction, and different cutting states to mitigate machining instability and enable better machine tool design. Among the topics discussed are; underlying dynamics of cutting and interruptions in cutting motions; the operation of the machine-tool systems over a broad range of operating conditions with minimal vibration and the need for high precision, high yield micro- and nano-machining.
Download or read book Fundamentals of Metal Machining and Machine Tools written by Winston A. Knight and published by CRC Press. This book was released on 2019-08-08 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting changes in machining practice, Fundamentals of Machining and Machine Tools, Third Edition emphasizes the economics of machining processes and design for machining. This edition includes new material on super-hard cutting tool materials, tool geometries, and surface coatings. It describes recent developments in high-speed machining, hard machining, and cutting fluid applications such as dry and minimum-quantity lubrication machining. It also presents analytical methods that outline the limitations of various approaches. This edition features expanded information on tool geometries for chip breaking and control as well as improvements in cost modeling of machining processes.
Download or read book Active Control of Machine Tool Chatter written by Chester L. Nachtigal and published by . This book was released on 1969 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2008-01-22 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials updates our knowledge on the metal cutting processes in relation to theory and industrial practice. In particular, many topics reflect recent developments, e.g. modern tool materials, computational machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, and generation and modelling of surface integrity. This book addresses the present state and future development of machining technologies. It provides a comprehensive description of metal cutting theory, experimental and modelling techniques along with basic machining processes and their effective use in a wide range of manufacturing applications. Topics covered include fundamental physical phenomena and methods for their evaluation, available technology of machining processes for specific classes of materials and surface integrity. The book also provides strategies for optimalization techniques and assessment of machinability. Moreover, it describes topics not currently covered in other sources, such as high performance and multitasking (complete) machining with a high potential for increasing productivity, and virtual and e-machining. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks but also new potential (emerging) applications such as micro- and nanotechnology. Many practical examples of modern machining technology Applicable for various technical, engineering and scientific levels Collects together 20 years of research in the field and related technical information
Download or read book Fundamentals of Metal Cutting and Machine Tools written by B. L. Juneja and published by New Age International. This book was released on 2003 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Is Intended To Serve As A Textbook For The Final And Pre-Final Year B.Tech. Students Of Mechanical, Production, Aeronautical And Textile Engineering Disciplines. It Can Be Used Either For A One Or A Two Semester Course. The Book Covers The Main Areas Of Interest In Metal Machining Technology Namely Machining Processes, Machine Tools, Metal Cutting Theory And Cutting Tools. Modern Developments Such As Numerical Control, Computer-Aided Manufacture And Non-Conventional Processes Have Also Been Treated. Separate Chapters Have Been Devoted To The Important Topics Of Machine Tool Vibration, Surface Integrity And Machining Economics. Data On Recommended Cutting Speeds, Feeds And Tool Geometry For Various Operations Has Been Incorporated For Reference By The Practising Engineer.Salient Features Of Second Edition * Two New Chapters Have Been Added On Nc And Cnc Machines And Part Programming. * All Chapters Have Been Thoroughly Revised And Updated With New Information. * More Solved Examples Have Been Added. * New Material On Tool Technology. * Improved Quality Of Figures And More Photographs.
Download or read book System Identification of Vibrating Structures written by American Society of Mechanical Engineers. Applied Mechanics Division. Shock and Vibration Committee and published by . This book was released on 1972 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Machining of Complex Aviation Components written by Dinghua Zhang and published by Springer Nature. This book was released on 2021-07-29 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the basic theoretical model and implementation method of intelligent machining technology and promotes the application of intelligent machining technology in the manufacturing of complex aviation components, such as aero-engine blisk, casing parts and blades. It not only presents the fundamental theory of intelligent machining, but also provides detailed examples of applications in the aviation industry.The topics covered include intelligent programming, intelligent processing models, process monitoring, machining process control, intelligent fixtures and applications in aviation components machining.This book is intended for researchers, engineers and postgraduate students in fields of manufacturing, mechatronics, mechanical engineering and related areas.
Download or read book Information Computing and Automation written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
