Download or read book Contr le de qualit appliqu e tudes de cas et nouvelle organisation du travail written by GROUS Ammar and published by Lavoisier. This book was released on 2013-02-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: L’action qualité est fondamentalement tributaire de la rigueur accordée au processus expérimental ainsi qu’à la maîtrise des outils adaptés aux paramètres d’analyse. Faire de l’étude qualité une simple application statistique théorique serait le signe d’une vision tronquée des causes symptomatiques de la qualification des produits. Les thèmes traités dans cet ouvrage sont structurés selon le cheminement de l’action qualité et de la nouvelle organisation du travail. Contrôler des produits, c’est avant tout les surveiller et les conserver jusqu’à la fin de la mission donnée. La surveillance est l’observation du dépassement d’un pourcentage de rebuts fixé au préalable. Analyser les causes d’un éventuel déréglage du procédé tend à minimiser le pourcentage de rebuts. L’action d’accepter ou de refuser la cote issue du procédé de fabrication doit toujours s’accompagner d’un rapport en vue d’améliorer la fabrication. De nombreux cas sont traités dans ce volume didactique qui s’adresse aux techniciens qualité, aux universitaires et aux professionnels.
Download or read book Roller Compacted Concrete Dams written by CIGB ICOLD and published by CRC Press. This book was released on 2020-12-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICOLD Bulletin 177 ‘Roller-Compacted Concrete Dams’ presents the state-of-the-art on roller-compacted concrete technology for dams, incorporating the advances of the RCC technology for dams over the last 15 years since the previous Bulletin on the topic was released in 2003. Hence, the present ICOLD Bulletin 177 supersedes ICOLD Bulletin 126 (‘Roller-compacted concrete dams - State of the art and case histories’, published in 2003) and ICOLD Bulletin 75 (‘Roller-Compacted Concrete for Gravity Dams’ published in 1989). While roller-compacted concrete technology could have still been considered a new technology in 2003, it is now true to say that construction by roller-compaction has become the standard approach for large concrete gravity dams. This Bulletin addresses all aspects of the planning, design, construction and performance of RCC in dams. Mixture proportioning and quality control are discussed and a comprehensive listing of references is included. Many aspects of RCC in dams have become better understood since the publication of Bulletin No 126 and the present Bulletin contains less information on the particular approaches applied in different countries, but includes more comprehensive information particularly in relation to design, mixture proportioning and construction. With greater understanding, it has further been possible to highlight more definitively the requirements of successful RCC dams, as well as the pitfalls and difficulties that can be associated with RCC dam design and construction. Le Bulletin CIGB 177, intitulé « Barrages en Béton Compacté au Rouleau » présente les dernières avancées en matière de technologie du béton compacté au rouleau pour les barrages intégrant les progrès de la technologie BCR pour les barrages au cours des 15 dernières années, depuis que le dernier bulletin sur le sujet a été publié en 2003. Par conséquent, le bulletin 177 remplace le bulletin 126 (« Barrages en béton compacté au rouleau - Technique actuelle et exemples », publié en 2003) et le bulletin 75 (« Béton compacté au rouleau pour barrages-poids - Technique actuelle » publié en 1989). Alors que la technologie du BCR pourrait encore être considérée comme une nouvelle technologie en 2003, il est maintenant vrai de dire que la construction par le compactage par rouleaux est devenue l'approche standard pour les grands barrage-poids en béton. Ce bulletin aborde tous les aspects de la planification, de la conception, de la construction et de la performance du BCR dans les barrages. Le dosage du mélange et le contrôle de la qualité sont discutés et une liste exhaustive des références est incluse. De nombreux aspects du BCR dans les barrages sont mieux compris depuis la publication du Bulletin no 126. Le présent bulletin contient moins d'informations sur les approches particulières appliquées dans différents pays, mais comprend des informations plus complètes notamment en ce qui concerne la conception, le dosage du mélange et la construction. Avec une plus grande compréhension, il a été possible de mettre en évidence les exigences des barrages en BCR réussis, ainsi que les pièges et les difficultés qui peuvent être associés à la conception et la construction du barrage en BCR.
Download or read book La qualit et la gouvernance des donn es au service de la performance des entreprises written by BERTI-EQUILLE Laure and published by Lavoisier. This book was released on 2012-09-14 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: La bonne qualité des données est aujourd'hui la clé de voûte de toute organisation. La gestion et l'amélioration de cette qualité sont des tâches coûteuses et difficiles, mais néanmoins incontournables. Cet ouvrage propose une étude des différents outils et démarches qui assistent les spécialistes de la qualité et de la gouvernance des données. À travers les expériences de la communauté francophone animée par l'association ExQI (Excellence Qualité, Information), il présente, avec pédagogie et pragmatisme, un panorama des concepts-clés de la gestion de la qualité des données et leurs déclinaisons dans les entreprises (Business Intelligence, Data QualityManagement, Key Performance Indicator, Model Driven Engineering, Master Data Management, etc.). Des solutions théoriques et techniques performantes sont détaillées et de nombreux retours d'expérience permettent d'illustrer les bonnes pratiques à adopter. Mêlant contributions industrielles et académiques, cet ouvrage est un outil de référence en langue française sur la qualité et la gouvernance des données en entreprise.
Download or read book Dictionnaire Anglais Des Affaires Du Commerce Et de la Finance written by and published by Psychology Press. This book was released on 1996 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary consists of some 100,000 terms and references in bith French and English, including 4,000 abbreviations. over 45 subject areas are covered, including: * Accountancy * Banking * Business Administration * Computing * Economics * Environment * Finance * General Commerce * Human Resource Management * Import/Export * Industry * Insurance * Law * Leisure * Management * Mathematics * Media * Patents * Politics * Property * Sales & Marketing * Stock Market * Taxation * Tourism * Transport * Welfare & Safety. Also included is a comprehensive up-to-date reference section on countries, business correspondence and situations, job titles, stock exchanges, economic indexes and numbers. KEY FEATURES Term Specialists - the terms list has been checked by over 100 sources including experts from Apple France * Association Française des Banques * Chartered Institute of Banking * France Telecom * Institute of European Trade and Technology * American Graduate School of Management * London School of Economics * Ecole supérieure de commerce de Lyon * Department of Trade and Industry * Law Society * University of Reading * Environment Council * University of Bath * Centre de Recherche et de Gestion * Manchester Business School * Ecole supérieure internationale de commerce and Ecole des hautes études commerciales de Montrial(HEC). Prestigous experts - include Prof. Chris Nobes, Prof. Michel Péron, Prof. Gordon Shenton, Dr. Van de Yeught and Prof. Peter Walton. Native Speakers - all stages of compilation have included native speakers of French as well as English and extensive coverage of US as well as UK terminology.
Download or read book Weld Quality The Role of Computers written by Sam Stuart and published by Elsevier. This book was released on 2016-05-13 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weld Quality: The Role of Computers documents the proceedings of the International Conference on Improved Weldment Control with Special Reference to Computer Technology, held in Vienna, Austria, 4-5 July 1988, under the auspices of the International Institute of Welding. The topics of the four sessions are: (I) Design, Calculation and Prediction Models For Metallurgical Processes/Conception; (II) Inspection and In-Service Monitoring; (III) Fabrication, Quality Assurance; and (IV) Expert Systems, Data Banks and Future Possibilities. Session I includes papers on the use of computer technology to establish the quality of the welded joints; computer-aided design system for design of fillet welds with optimum shape; and the use of numerical simulation software for predetermination and optimization of the mechanical resistance of brazed joints. The papers in Session II cover topics such as acoustic emission testing; eddy current inspection system for weld testing; and holographic imaging of weld cracks. Session III includes papers on a computer controlled friction welding system and a CAQ-system for welding workshops. The presentations in Session IV include an approach for writing conventional software and expert systems for welding engineers and an expert system for robotic welding.
Download or read book Legislation Governing Food Control and Quality Certification written by Jean-Pierre Chiaradia-Bousquet and published by Food & Agriculture Org.. This book was released on 1995 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide sur la s curit et l assurance de qualit des organes tissus et cellules written by and published by Council of Europe. This book was released on 2004-01-01 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ce guide s'adresse à la transplantation d'organes et de tissus d'origine humaine pratiquée dans une finalité thérapeutique et donne des orientations à toutes les personnes concernées afin de garantir la meilleure qualité possible des organes, tissus et cellules, d'optimiser le taux de réussite des transplantations et de minimiser les risques. Il comprend des normes de sécurité et d'assurance de qualité pour la collecte, la conservation, le traitement de la distribution des organes, tissus et cellules d'origine humaine utilisées aux fins de transplantation.
Download or read book Mechanical Tests for Bituminous Mixes Characterization Design and Quality Control written by E. Eustacchio and published by CRC Press. This book was released on 2004-06-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms the Proceedings of an International RILEM Symposium, the fourth in the series, on Testing of Bituminous Mixes in Budapest, Hungary, October 1990. The aim of the Symposium is to promote tests for the characterization, design and quality control of bituminous mixes which combine the best features of traditional and modern approaches. Among the topics covered are specimen preparation, tests with unique loading (Marshall test, uniaxial tension and creep tests etc), which are used for mix design or control of mechanical properties, and tests with repeated loading, which give information on fatigue, permanent deformation and moduli, especially for mix design.
Download or read book Elsevier s Dictionary of Automation Technics written by B. Zhelyazova and published by Elsevier. This book was released on 2005-04-28 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains 13,000 terms with more than 4,000 cross-references used in the following fields: automation, technology of management and regulation, computing machine and data processing, computer control, automation of industry, laser technology, theory of information and theory of signals, theory of algorithms and programming, philosophical bases of cybernetics, cybernetics and mathematical methods.Automation pertains to the theory, art, or technique of making a machine, a process or a device more fully automatic. Computers and information processing equipment play a large role in the automation of a process because of the inherent ability of a computer to develop decision that will, in effect, control or govern the process from the information received by the computer concerning the status of the process. Thus automation pertains to both the theory, and techniques of using automatic systems in industrial applications and the processes of investigation, design and conversion to automatic methods. Automatic control, automatic materials handling, automatic testing, automatic packaging, for continuous as well as batch processing, are all considered parts of the overall or completely automatic process.The Dictionary consists of two parts, Basic Table and Indexes. In the first part the English terms are listed alphabetically, numbered consecutively and followed by its German, French and Russian equivalents. English synonyms appear as cross-references to the main entries in their proper alphabetical order. The second part of the Dictionary, the Indexes, contains separate alphabetical indexes of the German, French and Russian terms. The reference number(s) with each term stands for the number of the English term(s) in the basic table.Elsevier's Dictionary of Automatic Technics will be a valuable tool for specialists, scientists, students and everyone who takes interest in the problems of investigation devoted to the design, development, and applications of methods and techniques for rendering a process of group of machines self-actuating, self-moving, or self-controlling.
Download or read book Dam Safety Management Gestion de la S curit des Barrages written by Cigb Icold and published by CRC Press. This book was released on 2021-06-10 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dam Safety Management is a major concern during the entire lifetime cycle of a dam scheme. This is particularly true for the operational phase of the scheme that represents by far the longest period in its lifetime cycle. Bulletin 154 presented a general approach and concepts to be applied to dam operation. The current Bulletin 175 extends the developed concepts to all phases preceding the operational phase. Many risks associated with the operation of existing dams have their origins in other phases preceding the actual operation. Although there are numerous ICOLD Bulletins addressing technical aspects of planning, design, construction and commissioning of dams, there is not a single Bulletin which covers the subject in a comprehensive manner. The current document is a first attempt to capture all relevant dam safety aspects in all preoperational phases by systematically characterizing the actors involved, their roles, the activities and complex interactions present in different phases of the dam lifecycle. An Overarching Safety Management System is specifically developed that can be applied to all actors involved. La gestion de la sécurité des barrages est une préoccupation majeure pendant tout le cycle de vie d'un projet de barrage. Cela est particulièrement vrai pour la phase opérationnelle du système qui représente de loin la période la plus longue de son cycle de vie. Le Bulletin 154 présente une approche générale et des concepts à appliquer à l'exploitation des barrages. Le Bulletin 175 actuel étend les concepts développés à toutes les phases précédant la phase d'exploitation. De nombreux risques associés à l'exploitation des barrages existants ont leur origine dans d'autres phases précédant l'exploitation proprement dite. Bien qu'il existe de nombreux bulletins ICOLD traitant des aspects techniques de la planification, de la conception, de la construction et de la mise en service des barrages, il n'existe pas un seul bulletin qui couvre le sujet de manière exhaustive. Le document actuel est une première tentative de capturer tous les aspects pertinents de la sécurité des barrages dans toutes les phases pré-opérationnelles en caractérisant systématiquement les acteurs impliqués, leurs rôles, les activités et les interactions complexes présentes dans les différentes phases du cycle de vie du barrage. Un système global de gestion de la sécurité est spécifiquement développé et peut être appliqué à tous les acteurs impliqués.
Download or read book Water for Peace Water supply technology written by and published by . This book was released on 1968 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water for Peace Planning and developing water programs written by and published by . This book was released on 1968 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water for Peace written by and published by . This book was released on 1968 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quality Control for Food and Agricultural Products written by J.-L. Multon and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Quality Control for Foods and Agricultural Products" is a single, complete, and practical reference to the wide variety of techniques for quality control in the production of food products. The book may also serve as a guidebook to other industries that are initiating or reviewing their quality control procedures. This title provides an overview of the tools available for quality control in the food industry. Among the quality control measures discused are practical methodology, sampling methods, measurement devices, sensors, computer analysis, data interpretation, reference materials, and standardization. "Quality Control for Foods and Agricultural Products" allows the reader to compare and contrast the advantages and disadvantages associated with a particular quality control method. Armed with this knowledge, the best possible quality control method may be chosen for a given product.
Download or read book Faith Based Schools in Latin America written by Juan Carlos Parra Osorio and published by World Bank Publications. This book was released on 2014-01-13 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, that includes evaluations of academic performance and other management aspects and pedagogical practices of Fe y Alegr a schools, is a selection of contributions made at the international workshop Fe y Alegr a: Expanding the Quality Education Opportunities in Latin America
Download or read book Traitement du signal et de l image pour la biom trie written by NAÏT-ALI Amine and published by Lavoisier. This book was released on 2012-09-14 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ce livre met en évidence l'utilisation des différentes approches de traitement du signal et de l'image dans des applications d'identification ou d'authentification des individus. Son contenu s'adresse, en particulier, aux étudiants de 3ème cycle, chercheurs et ingénieurs qui souhaitent s'initier au développement d'algorithmes spécifiques et leur intégration dans des systèmes biométriques. Le lecteur y trouvera, d'une part, des chapitres introductifs, orientés pédagogie et d'autre part, des chapitres à vocation recherche. Evidemment, la reconnaissance faciale 2D/3D, la reconnaissance par l'iris et les traits de la main sont considérés, mais les auteurs ont également souhaité renforcer le contenu de cet ouvrage par des chapitres portant sur la multi-biométrie, l'évaluation des performances des systèmes biométriques ainsi que certains outils de traitement du signal tels que la classification, la cryptographie et la protection des données. Enfin, il est également présenté dans cet ouvrage de nouveaux concepts et orientations récentes. Ce travail est le fruit de la contribution de plusieurs acteurs du milieu académique et de l'industrie, actifs dans le domaine de la biométrie et de la sécurité.
