Download or read book Continuous Casting written by Michael Vynnycky and published by MDPI. This book was released on 2019-07-30 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous casting is an industrial process whereby molten metal is solidified into a semi-finished billet, bloom, or slab for subsequent rolling in finishing mills; it is the most frequently used process to cast not only steel, but also aluminium and copper alloys. Since its widespread introduction for steel in the 1950s, it has evolved to achieve improved yield, quality, productivity and cost efficiency. It allows lower-cost production of metal sections with better quality, due to the inherently lower costs of continuous, standardized production of a product, as well as providing increased control over the process through automation. Nevertheless, challenges remain and new ones appear, as ways are sought to minimize casting defects and to cast alloys that could originally only be cast via other means. This Special Issue of the journal "Metals" consists of 14 research articles that cover many aspects of experimental work and theoretical modelling related to the ongoing development of continuous casting processes.
Download or read book Continuous Casting of Steel written by W. R. Irving and published by CRC Press. This book was released on 1993 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1994. Routledge is an imprint of Taylor & Francis, an informa company.
Download or read book Continuous Casting written by H. R. Müller and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Continuous Casting 2000 symposium maintains the tradition established in 1976 of holding regular events. This millennium event, however, is the first international meeting of the series. The aim is to highlight the importance of continuous casting - of aluminum, copper and magnesium - to the international fabricating industry, focusing on technological advances in all the sectors that are important for the manufacture of high quality continuous cast products.
Download or read book Benefits of increased use of continuous casting by the U S steel industry written by United States. Congress. Office of Technology Assessment and published by DIANE Publishing. This book was released on 1979 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.
Download or read book IRON MAKING AND STEELMAKING written by AHINDRA GHOSH and published by PHI Learning Pvt. Ltd.. This book was released on 2008-02-29 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative account covers the entire spectrum from iron ore to finished steel. It begins by tracing the history of iron and steel production, right from the earlier days to today’s world of oxygen steelmaking, electric steelmaking, secondary steelmaking and continuous casting. The physicochemical fundamental concepts of chemical equilibrium, activity-composition relationships, and structure-properties of molten metals are introduced before going into details of transport phenomena, i.e. kinetics, mixing and mass transfer in ironmaking and steelmaking pro-cesses. Particular emphasis is laid on the understanding of the fundamental principles of the processes and their application to the optimisation of actual processes. Modern developments in blast furnaces, including modelling and process control are discussed along with an introduction to the alternative methods of ironmaking. In the area of steelmaking, BOF plant practice including pre-treatment of hot metal, metallurgical features of oxygen steelmaking processes, and their control form part of the book. It also covers basic open hearth, electric arc furnace and stainless steelmaking, before discussing the area of casting of liquid steel—ingot casting, continuous casting and near net shape casting. The book concludes with a chapter on the status of the ironmaking and steelmaking in India. In line with the application of theoretical principles, several worked-out examples dealing with fundamental principles as applied to actual plant situations are presented. The book is primarily intended for undergraduate and postgraduate students of metallurgical engineering. It would also be immensely useful to researchers in the area of iron and steel.
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student. Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books. This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text * Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works * Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
Download or read book Effect of Steel Manufacturing Processes on the Quality of Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1988 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuous Casting written by A. Heinrich Tanner and published by Write Stuff Syndicate. This book was released on 1998 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: It started with a simple phone call, when continuous casting pioneer Irving Rossi called Swiss lawyer Heinrich Tanner, asking him to join as general manager in a new venture to prove that the process had remarkable commercial potential. Rossi and Tanner built a company that became so dominant in the steel industry European and American governments ordered it dissolved. Offered in English for the first time, Continuous Casting: A Revolution in Steel is H. Tanner's acclaimed personal account of the rise of Concast AG. Tanner balances technical details with recollections and anecdotes to tell the story of the revolutionary continuous casting process and its impact on the worldwide steel industry.
Download or read book Continuous Casting of Steel written by and published by . This book was released on 1989 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Materials Selection written by Myer Kutz and published by John Wiley & Sons. This book was released on 2002-07-22 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals in einem Band werden Werkstoffe hier (in zwei getrennten Systemen) sowohl nach ihrer technischen Anwendung als auch nach ihren Eigenschaften geordnet. - Benutzer können deshalb zunächst nach der Gruppe von Materialen suchen, die für eine spezielle Anwendung geeignet sind, und anschließend Details über jedes einzelne Material finden - Suchkriterien sind Eigenschaften wie Wärmeleitfähigkeit, optisches Reflexionsvermögen, Elastizität usw. und Anwendungsgebiete wie Bauwesen, Biomedizin, Fahrzeugbau, Luftfahrttechnik, Elektrotechnik usw. - berücksichtigt werden sowohl herkömmliche Werkstoffe (Eisen- und Nichteisenmetalle, Kunststoffe, Klebstoffe) als auch Kompositwerkstoffe und synthetische Materialen wie Laminate, Fasern und Keramiken
Download or read book New Trends in Applied Artificial Intelligence written by Hiroshi G. Okuno and published by Springer. This book was released on 2007-07-18 with total page 1198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE 2007, held in Kyoto, Japan. Coverage includes text processing, fuzzy system applications, real-world interaction, data mining, machine learning chance discovery and social networks, e-commerce, heuristic search application systems, and other applications.
Download or read book Cast and Wrought Aluminium Bronzes written by Harry Meigh and published by CRC Press. This book was released on 2018-04-24 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous casting of non-ferrous metals has been practised for well over 100 years. It has many advantages over static ingot and book mould casting, the most important being improved yield, reduced energy consumption and reduction of manpower, with a consequent reduction in cost. This book shows how the prrocess can be used in an engineering environment for casting a wide range of copper based alloys and precious metals, including gold and silver, and selected nickel alloys.
Download or read book Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1998 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of a November 1996 conference in New Orleans, update previous information and present new materials and processing relating to steel for the anti-friction bearing industry. Among other subjects, they cover steel cleanliness and measuring methods, bearing fatigue life, advanced steel
Download or read book Aluminium Cast House Technology written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2013-10-15 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling of Fluid Flow in Tundishes During Continuous Casting of Steel and Minimization of Transition Slabs written by Huiqing Chen and published by . This book was released on 1994 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Strip Casting of Metals and Alloys written by M Ferry and published by Woodhead Publishing. This book was released on 2006-03-24 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct strip casting is a continuous casting process for producing metallic sheet directly from the molten state that minimises the need for substantial secondary processing. This important book is the first to review the implications of strip casting technology for a range of alloys, including carbon and stainless steel, aluminium, magnesium, titanium, copper and other non-ferrous alloys.The book is divided into six chapters, with the first two describing the physical metallurgy of candidate alloys for direct strip casting and the development of microstructure during solidification. Chapter 3 describes the principles of continuous casting processes and the evolution of direct strip casting. It provides the foundation for the following two chapters which describe process variables and their impact on microstructure and strip quality. The final chapter describes possible techniques in secondary processing and fabrication of the as-cast strip. Two appendices discuss simulation and modelling issues, and the measurement and representation of textures in metal strip.Direct strip casting of metals and alloys is a standard reference on a technology destined to have a profound impact on the manufacturing landscape of the twenty-first century. First book to review the implications of strip technology for a range of alloys Essential book on a technology destined to have a profound impact on the manufacturing landscape of the twenty-first century
