Download or read book Concise Handbook of Fluorocarbon Gases written by Sina Ebnesajjad and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes fluorocarbons gases’ preparation process, properties, applications and their evolution over time. The impact of fluorocarbons on the ozone layer and global and the development to mitigate those effects have been specially emphasized. The first major industrial fluorinated compound was developed in the 1920’s, to replace ammonia and sulfur dioxide refrigerants, at the General Motors Frigidaire Division by Thomas Midgley, Jr. and Albert Leon Henne. They developed a family of fluorocarbons trademarked Freon® for auto air conditioning units revolutionizing the auto industry. Other applications were developed over time including fire extinguishers, propellants, blowing agents, cleaners, anesthesia, artificial blood and others impacting every facet of life. In spite of being in broad global use for nearly a century, fluorocarbon gases have gone through great evolution during the last few decades. In the 1980s it was discovered chlorofluorocarbon (CFC) gases are harmful to the ozone layer, mainly because of their chlorine content. Chlorine was released in the upper atmosphere when chlorofluorocarbon molecules were broken down by the high energy cosmic radiation. CFCs were progressively banned following the Montreal Protocol of 1987. CFCs were replaced by fluorinated gases containing either less chlorine (hydrofluoro-chlorocarbons, or HCFCs), which are much less damaging (about 90% less) to the ozone layer or with fluorinated gases containing no chlorine, i.e. hydrofluorocarbons or HFCs. HFC have no impact on the ozone layer but impact global warming detrimentally. HFCs are usable without need for changes to the existing refrigeration or air conditioning installations. More recently hydrofluoroolefins (HFOs), which have little or no negative impact on global warming, have been developed to replace or reduce the use of HFCs. HFOs are used as single compounds or in blends. Research and development continues to develop and replace the HCFCs and HFCs completely with environmentally friendly products. Concise Handbook of Fluorocarbon Gases presents a reference and text for the commercial fluorocarbon gases which have great many application in a wide range of industries such as refrigeration and air conditioning, as well as consumer products.
Download or read book Technology of Fluoropolymers written by Jiri G. Drobny and published by CRC Press. This book was released on 2023-04-21 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been updated and expanded, providing industrial chemists, technologists, environmental scientists, and engineers with an accurate, compact, and practical source of information on fluoropolymers. Highlighting existing and new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and processing conditions. It explores breakthroughs in understanding property-structure relationships, new polymerization techniques, and the chemistry underlying polymers, such as melt-processable fluoroplastics. It also expands on the important properties of fluoropolymers, including heat and radiation degradation, health effects, and recycling. Features: Revised, updated, and expanded to continue to provide an accurate, compact, and practical source of information on fluoropolymers Explores the property-structure relationships, polymerization techniques, and the chemistry underlying polymers Fluoropolymers rank high on the specialty polymers group and, due to their unique properties, are naturally part of the solution to the industrial sustainability challenges of the twenty-first century Describes the technology of fluoropolymers, including thermoplastic and elastomeric products Expands upon the important characteristics of fluoropolymers and their recycling.
Download or read book Concise Marine Almanac written by W. Tillar Shugg and published by Springer. This book was released on 1986-12-31 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluoroelastomers Handbook written by Albert L. Moore and published by . This book was released on 2005* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Walford s Concise Guide to Reference Material written by Albert John Walford and published by Library Association Publishing (UK). This book was released on 1992 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a shortened version of the three volume Walford's Guide to Reference Material, 5th edition: Volume 1, Science and Technology (1989), Volume 2, Social and historical sciences, philosophy and religion (1990), and Volume 3, Generalia, language and literature, the arts (1991). There are more than 3,000 entries, forming an updated compilation of what are considered to be the basic items in the main volumes, plus some more recent material up to April 1992.
Download or read book Concise Manual of Chemical and Environmental Safety in Schools and Colleges Hazardous chemical classes written by and published by . This book was released on 1988 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Oil and Gas Journal written by and published by . This book was released on 1967-10 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations on the Transport of Dangerous Goods written by United Nations and published by . This book was released on 2020-01-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Manual of Tests and Criteria contains criteria, test methods and procedures to be used for classification of dangerous goods according to the provisions of Parts 2 and 3 of the United Nations Recommendations on the Transport of Dangerous Goods, Model Regulations, as well as of chemicals presenting physical hazards according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). As a consequence, it supplements also national or international regulations which are derived from the United Nations Recommendations on the Transport of Dangerous Goods or the GHS. At its ninth session (7 December 2018), the Committee adopted a set of amendments to the sixth revised edition of the Manual as amended by Amendment 1. This seventh revised edition takes account of these amendments. In addition, noting that the work to facilitate the use of the Manual in the context of the GHS had been completed, the Committee considered that the reference to the "Recommendations on the Transport of Dangerous Goods" in the title of the Manual was no longer appropriate, and decided that from now on, the Manual should be entitled "Manual of Tests and Criteria".
Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs
Download or read book Valve Selection Handbook written by Peter Smith and published by Elsevier. This book was released on 2004-01-24 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market analyzes the use, construction, and selection of valves in such a comprehensive manner. - Covers new environmentally-conscious equipment and practices, the most important hot-button issue in the petrochemical industry today - Details new generations of valves for offshore projects, the oil industry's fastest-growing segment - Includes numerous new products that have never before been written about in the mainstream literature
Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2013-10-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994
Download or read book Materials Handbook written by John A. Vaccari and published by McGraw Hill Professional. This book was released on 2002-07-09 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Materials Handbook is an encyclopedic, A-to-Z organization of all types of materials, featuring their key performance properties, principal characteristics and applications in product design. Materials include ferrous and nonferrous metals, plastics, elastomers, ceramics, woods, composites, chemicals, minerals, textiles, fuels, foodstuffs and natural plant and animal substances --more than 13,000 in all. Properties are expressed in both U.S. customary and metric units and a thorough index eases finding details on each and every material. Introduced in 1929 and often known simply as "Brady's," this comprehensive, one-volume, 1244 page encyclopedia of materials is intended for executives, managers, supervisors, engineers, and technicians, in engineering, manufacturing, marketing, purchasing and sales as well as educators and students. Of the dozens of families of materials updated in the 15th Edition, the most extensive additions pertain to adhesives, activated carbon, aluminides, aluminum alloys, catalysts, ceramics, composites, fullerences, heat-transfer fluids, nanophase materials, nickel alloys, olefins, silicon nitride, stainless steels, thermoplastic elastomers, titanium alloys, tungsten alloys, valve alloys and welding and hard-facing alloys. Also widely updated are acrylics, brazing alloys, chelants, biodegradable plastics, molybdenum alloys, plastic alloys, recyclate plastics, superalloys, supercritical fluids and tool steels. New classes of materials added include aliphatic polyketones, carburizing secondary-hardening steels and polyarylene ether benzimidazoles. Carcinogens and materials likely to be cancer-causing in humans are listed for the first time.
Download or read book Environment Hong Kong written by and published by . This book was released on 1991 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compounding Materials for the Polymer Industries written by John S. Dick and published by William Andrew. This book was released on 1987 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the Society of Environmental Engineers written by and published by . This book was released on 1987 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Engineering written by Society of Environmental Engineers (Great Britain) and published by . This book was released on 1987 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Processing written by and published by . This book was released on 1977 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
