Download or read book Computer Integrated Production Systems and Organizations written by Felix Schmid and published by Springer Verlag. This book was released on 1994 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Integrated Production Systems and Organizations written by Felix Schmid and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Background to the Institute The NATO Advanced Study Institute (ASI) 'People and Computers - Applying an Anthropocentric Approach to Integrated Production Systems and Organisations' came about after the distribution of a NATO fact sheet to BruneI University, which described the funding of ASls. The 'embryonic' director of the ASI brought this opportunity to the attention of the group of people, (some at BruneI and some from outside), who were together responsible for the teaching and management of the course in Computer Integrated Manufacturing (CIM) in BruneI's Department of Manufacturing and Engineering Systems. This course had been conceived in 1986 and was envisaged as a vehicle for teaching manufacturing engineering students the technology of information integration through project work. While the original idea of the course had also included the organisational aspects of CIM, the human factors questions were not considered. This shortcoming was recognised and the trial run of the course in 1988 contained some lectures on 'people' issues. The course team were therefore well prepared and keen to explore the People, Organisation and Technology (POT) aspects of computer integration, as applied to industrial production. A context was proposed which would allow the inclusion of people from many different backgrounds and which would open up time and space for reflection. The proposal to organise a NATO ASI was therefore welcomed by all concerned.
Download or read book Automation Production Systems and Computer integrated Manufacturing written by Mikell P. Groover and published by . This book was released on 2001 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: For advanced undergraduate/ graduate-level courses in Automation, Production Systems, and Computer-Integrated Manufacturing. This exploration of the technical and engineering aspects of automated production systems provides the most advanced, comprehensive, and balanced coverage of the subject of any text on the market. It covers all the major cutting-edge technologies of production automation and material handling, and how these technologies are used to construct modern manufacturing systems.
Download or read book CIM Systems written by Ferdinand Haverman Mitchell and published by . This book was released on 1991 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining manufacturing systems with management techniques, this integrated approach to designing and developing CIM systems provides a multi-disciplinary, system-oriented background understanding of advanced manufacturing issues and strategies. It also offers design methods that can be used to create competitive manufacturing systems. The text's methods include assessing problems, determining solution approaches and developing and integrating systems based on relevant engineering, science and management disciplines. Software is included for a simple system-environment simulation (SES) model that illustrates the application of key concepts. Real-world application design models are applied to specific system examples. The author discusses design principles within a comprehensive framework, providing a context for understanding manufacturing operations and relationships. Throughout the text, the integrated technical and management considerations aim to encourage effective CIM team management.
Download or read book Manufacturing Databases and Computer Integrated Systems written by Dimitris N. Chorafas and published by CRC Press. This book was released on 1993-07-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Databases and Computer Integrated Systems is the first book to probe the problems and solutions presented by the diversity of databases within the manufacturing industry. The author examines these heterogeneous databases at both the macro (national/international) level and micro (intracompany and intercompany) level. This book is the result of an extensive international research project that involved 87 leading organizations. Manufacturing Databases and Computer Integrated Systems presents the compelling argument for using computers as database integrators, a concept beyond the obvious applications of number crunching and data storage. The book addresses several different areas of manufacturing technology, including product policies in manufacturing, fuzzy controls in plant operations, concurrent engineering, practical applications for expert systems, organizational prerequisites in manufacturing, heterogenous database environments, the benefits of object-oriented databases, and the requirements for virtual database integration. Manufacturing Databases and Computer Integrated Systems also presents case studies, including the TRW solution applied in Operation Desert Storm, Project CRONUS by BBN, the Intelligent Database Assistant (IDA) by GTE, General Motor's DATAPLEX solution, and Project Carnot by the Microelectronics and Computer Development Corporation (MCC). The book is a "must" for computer and database technologists, engineers, and senior management at most companies worldwide.
Download or read book CIM Computer Integrated Manufacturing written by August-Wilhelm Scheer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Integrated Manufacturing (CIM) is the computerized handling of integrated operational processes between production planning and control, design, process planning, production, and quality assurance. The consistent application of information technology, along with modern manufacturing techniques and new organizational procedures, opens up great potential for rationalization by speeding up processes, thereby reducing stocks and improving product structure and delivery times. Following a comprehensive justification of the CIM integration principle, this book discusses the current state of applications and new demands arising from the integration principle as applied to the individual CIM components. The interfaces between business and technical information processing are considered in detail. The main emphasis, however, is on strategies for realization and implementation based on concrete experi- ence. The "Y-CIM information management" model, developed and tested at the author's institute, is presented as a procedural method for implementing CIM and demonstrated using up-to-date examples. In addition to the procedure for developing a CIM strategy, concrete sub-projects are developed which are directed at specific sector or enterprise structures. The survey of further CIM developments including design stage cost estimation, use of expert systems and inter-company process chains have proved to be effective CIM components since the first edition of this book and are now treated in the main text. Six German and five American industrial implementations are presented to illustrate the diverse areas of emphasis in the implementation sequence, and to indicate how CIM can be realized with currently available data processing tools.
Download or read book Crossing the Border written by J. Martin Corbett and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crossing the Border examines the emergence of a new philosophy based on the idea of "human-centred technology" and, through the use of a case study, illustrates the ways in which users, social scientists, managers and engineers can participate in the design and development of human-centred computer integrated manufacturing (CIM) system. The book offers a unique insight into a large European project (ESPRIT project 1217) aimed at the design and development of a human-centred CIM system. The book examines the problems inherent in developing interdisciplinary design methods and of "crossing the border" between the social and engineering sciences. The authors offer proposals and guidelines for overcoming such problems based on their experience within this project. Crossing the Border will be of particular interest to researchers and practitioners in the area of factory automation, to students and researchers in AI, and to all those interested in the human and organisational issues surrounding the computerised factory of the future.
Download or read book Computer Aided Production Management written by Asbjorn Rolstadas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.
Download or read book COMPUTER INTEGRATED MANUFACTURING written by A. ALAVUDEEN and published by PHI Learning Pvt. Ltd.. This book was released on 2008-08-18 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date and accessible text deals with the basics of Computer Integrated Manufacturing (CIM) and the many advances made in the field. It begins with a discussion on automation systems, and gives the historical background of many of the automation technologies. Then it moves on to describe the various techniques of automation such as group technology and flexible manufacturing systems. The text describes several production techniques, for example, just-in-time (JIT), lean manufacturing and agile manufacturing, besides explaining in detail database systems, machine functions, and design considerations of Numerical Control (NC) and Computer Numerical Control (CNC) machines, and how the CIM system can be modelled. The book concludes with a discussion on the industrial application of artificial intelligence with the help of case studies, in addition to giving network application and signalling approaches. Intended primarily as a text for the undergraduate and graduate students of mechanical, production, and industrial engineering and management, the text should also prove useful for the professionals in the field.
Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-08-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standa
Download or read book Computer integrated Manufacturing written by Karl Heinrich Ebel and published by International Labour Organization. This book was released on 1990 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The international exchange of information on occupational safety and health questions is becoming increasingly important, to give governments, industry, employers' and workers' organizations, scientific institutions and others concerned with this field easier access to information on occupational safety and health practices in other countries.
Download or read book Computer Integrated Manufacturing written by I. Burhan Turksen and published by . This book was released on 1988 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Current state of expectations is that Computer Integrated Manufacturing (CIM) will ulti mately determine the industrial growth of world nations within the next few decades. Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Flexible Manufacturing Systems (FMS), Robotics together with Knowledge and Information Based Systems (KIBS) and Com munication Networks are expected to develop to a mature state to respond effectively to the managerial requirements of the factories of the future that are becoming highly integrated and complex. CIM represents a new production approach which will allow the factories to deliver a high variety of products at a low cost and with short production cycles. The new technologies for CIM are needed to develop manufacturing environments that are smarter, faster, close-cou pled, integrated, optimized, and flexible. Sophistication and a high degree of specialization in materials science, artificial intelligence, communications technology and knowledge-information science techniques are needed among others for the development of realizable and workable CIM systems that are capable of adjusting to volatile markets. CIM factories are to allow the production of a wide variety of similar products in small batches through standard but multi mission oriented designs that accommodate flexibility with specialized software.
Download or read book Computer Integrated Manufacturing Iccim 91 Manufacturing Enterprises Of The 21st Century Proceedings Of The International Conference written by B S Lim and published by World Scientific. This book was released on 1991-10-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 21st century, computer integrated manufacturing (CIM) systems will not only be the economic development tools but will also be the essential means of achieving a higher level of flexibility, cohesiveness and performance. CIM systems are beginning to settle into our society and industries, with greater emphasis on the integration of economic, cultural and social aspects together with design, planning, factory automation and artificial intelligent systems.This volume of proceedings brings together 10 keynote and invited speaker addresses, and over 180 papers by practitioners from 28 countries. It documents current research and in-depth studies on the fundamental aspects of advanced CIM systems and their practical applications. The papers fall into 3 main sections: CIM Related Issues; Industrial AI Applications Aspects; and Concurrent Engineering, Advanced Design, Simulation and Flexible Manufacturing Systems.
Download or read book Computer Integrated Manufacturing written by Dr.R.Raghu Chand and published by Forschung Publications. This book was released on 2020-12-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers computer integrated manufacturing systems, analysis of automated flow line & line balancing, automated assembly systems, computerized manufacturing planning systems, CNC machining centers, and robotics.
Download or read book Computer integrated Manufacturing Technology and Systems written by Ulrich Rembold and published by . This book was released on 1985 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This outstanding reference examines in detail the computer application for design, planning, scheduling, production, assembly and quality control activities.
Download or read book Computer Assisted Management and Control of Manufacturing Systems written by Spyros G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem manufacturing systems involve many processes and operations that can be monitored and controlled at several levels of intelligence. At the highest level there is a computer that supervises the various manufacturing functions, whereas at the lowest level there are stand alone computer controlled systems of manufacturing processes and robotic cells. Until recenty computer-aided manufacturing systems constituted isolated "islands" of automation, each oriented to a particular application, but present day systems offer integrated approaches to manufacturing and enterprise operations. These modem systems, known as computer-integrated manufacturing (CIM) systems, can easily meet the current performance and manufacturing competitiveness requirements under strong environmental changes. CIM systems are much of a challenge, and imply a systemic approach to the design and operation of a manufacturing enterprise. Actualy, a CIM system must take into account in a unified way the following three views : the user view, the technology view, and the enterprise view. This means that CIM includes both the engineering and enterprise planning and control activities, as well as the information flow activities across all the stages of the system.
Download or read book Automation Production Systems and Computer integrated Manufacturing written by Mikell P. Groover and published by . This book was released on 2013-07-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: For advanced undergraduate/ graduate-level courses in Automation, Production Systems, and Computer-Integrated Manufacturing. This exploration of the technical and engineering aspects of automated production systems provides the most advanced, comprehensive, and balanced coverage of the subject of any text on the market. It covers all the major cutting-edge technologies of production automation and material handling, and how these technologies are used to construct modern manufacturing systems.
