Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Numerical Modeling In Combustion written by T. J. Chung and published by CRC Press. This book was released on 1993-06-01 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes different numerical methods for applications in three particular fields: laminar flames, turbulent flames, and spray droplet combustion. It begins with an introduction on numerical modeling and general forms of governing equations in combustion. It also introduces options of numerical techniques to solve reactive flow problems in general, and combustion problems in particular. Basic numerical strategies are discussed, and certain example problems are selected for evaluation of the numerical methods and physical aspects of combustion.
Download or read book Data Analysis for Direct Numerical Simulations of Turbulent Combustion written by Heinz Pitsch and published by Springer Nature. This book was released on 2020-05-28 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents methodologies for analysing large data sets produced by the direct numerical simulation (DNS) of turbulence and combustion. It describes the development of models that can be used to analyse large eddy simulations, and highlights both the most common techniques and newly emerging ones. The chapters, written by internationally respected experts, invite readers to consider DNS of turbulence and combustion from a formal, data-driven standpoint, rather than one led by experience and intuition. This perspective allows readers to recognise the shortcomings of existing models, with the ultimate goal of quantifying and reducing model-based uncertainty. In addition, recent advances in machine learning and statistical inferences offer new insights on the interpretation of DNS data. The book will especially benefit graduate-level students and researchers in mechanical and aerospace engineering, e.g. those with an interest in general fluid mechanics, applied mathematics, and the environmental and atmospheric sciences.
Download or read book Numerical Modeling of Turbulent Combustion written by Luc Vervisch and published by Academic Press. This book was released on 2025-05-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modeling of Turbulent Combustion provides readers with a comprehensive understanding of the specificities involved in numerical simulation of gaseous turbulent reactive flows and flames, including their most current applications. This title is intended for individuals with a background in fluid mechanics who are seeking to delve into the fundamentals of turbulent combustion modeling. It offers methodologies to simulate flames while taking into account their multi-physics character. Moreover, the text addresses emerging numerical technologies within this field and highlights the relevance of new sustainable fuels. The structure of the book is carefully organised to cover various aspects. It begins with an exploration of the fundamentals of aerothermochemistry, presenting key quantities and their corresponding balance equations that require numerical solutions. The book then delves into the essential concepts and tools necessary to handle the strongly non-linear nature of turbulent flames, with a specific focus on the interplay between turbulence and chemistry. Furthermore, readers will gain insights into the numerical modeling of flames within the context of sustainable combustion. This includes the introduction of novel fuels, such as hydrogen and solid metals, which have become increasingly relevant in recent times. The book also takes into account cutting-edge techniques, like the systematic integration of machine learning in numerical simulations of complex systems and the lattice Boltzmann approach. These innovations open new possibilities for tackling challenges in numerical turbulent combustion research. Both the fundamental methods and modeling tools are presented in detail, along with best practice guidelines for their practical application in simulations. This ensures that readers not only grasp the underlying theories but also gain valuable insights into how to implement these techniques effectively. Overall, Numerical Turbulent Combustion serves as a valuable resource for researchers and practitioners alike, offering a comprehensive and up-to-date understanding of numerical simulations in the field of turbulent combustion. - Offers a comprehensive and balanced approach by addressing the problem both theoretically and practically - Provides a consistent and in-depth exploration of flames and turbulent combustion - Highlights the most current and crucial applications, with a particular emphasis on fostering a fundamental understanding and emerging technologies
Download or read book Combustion Numerical Modeling written by Rector Press, Limited and published by . This book was released on 1994-08 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation of Combustion Phenomena written by Roland Glowinski and published by . This book was released on 1985 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Simulation of Turbulent Combustion written by Santanu De and published by Springer. This book was released on 2017-12-12 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.
Download or read book Numerical Approaches to Combustion Modeling written by Elaine S. Oran and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1991 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Numerical Modeling of MILD Combustion written by Chu-p'yŏ Kim and published by . This book was released on 2008 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Simulating Combustion written by Günter P. Merker and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of combustion processes in internal combustion engines, including also the formation of pollutants, has become increasingly important in the recent years, and today the simulation of those processes has already become an indispensable tool when - veloping new combustion concepts. While pure thermodynamic models are well-established tools that are in use for the simulation of the transient behavior of complex systems for a long time, the phenomenological models have become more important in the recent years and have also been implemented in these simulation programs. In contrast to this, the thr- dimensional simulation of in-cylinder combustion, i. e. the detailed, integrated and continuous simulation of the process chain injection, mixture formation, ignition, heat release due to combustion and formation of pollutants, has been significantly improved, but there is still a number of challenging problems to solve, regarding for example the exact description of s- processes like the structure of turbulence during combustion as well as the appropriate choice of the numerical grid. While chapter 2 includes a short introduction of functionality and operating modes of internal combustion engines, the basics of kinetic reactions are presented in chapter 3. In chapter 4 the physical and chemical processes taking place in the combustion chamber are described. Ch- ter 5 is about phenomenological multi-zone models, and in chapter 6 the formation of poll- ants is described.
Download or read book Technologien zur Einsparung von Energie written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production of Biofuels and Numerical Modeling of Chemical Combustion Systems written by Miguel Torres García and published by MDPI. This book was released on 2021-08-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofuels have recently attracted a lot of attention, mainly as alternative fuels for applications in energy generation and transportation. The utilization of biofuels in such controlled combustion processes has the great advantage of not depleting the limited resources of fossil fuels while leading to emissions of greenhouse gases and smoke particles similar to those of fossil fuels. On the other hand, a vast amount of biofuels are subjected to combustion in small-scale processes, such as for heating and cooking in residential dwellings, as well as in agricultural operations, such as crop residue removal and land clearing. In addition, large amounts of biomass are consumed annually during forest and savanna fires in many parts of the world. These types of burning processes are typically uncontrolled and unregulated. Consequently, the emissions from these processes may be larger compared to industrial-type operations. Aside from direct effects on human health, especially due to a sizeable fraction of the smoke emissions remaining inside residential homes, the smoke particles and gases released from uncontrolled biofuel combustion impose significant effects on the regional and global climate. Estimates have shown the majority of carbonaceous airborne particulate matter to be derived from the combustion of biofuels and biomass. “Production of Biofuels and Numerical Modelling of Chemical Combustion Systems” comprehensively overviews and includes in-depth technical research papers addressing recent progress in biofuel production and combustion processes. To be specific, this book contains sixteen high-quality studies (fifteen research papers and one review paper) addressing techniques and methods for bioenergy and biofuel production as well as challenges in the broad area of process modelling and control in combustion processes.
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Numerical Modeling of Explosives and Propellants written by Charles L. Mader and published by CRC Press. This book was released on 2007-10-18 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major advances, both in modeling methods and in the computing power required to make those methods viable, have led to major breakthroughs in our ability to model the performance and vulnerability of explosives and propellants. In addition, the development of proton radiography during the last decade has provided researchers with a major new experimental tool for studying explosive and shock wave physics. Problems that were once considered intractable – such as the generation of water cavities, jets, and stems by explosives and projectiles – have now been solved. Numerical Modeling of Explosives and Propellants, Third Edition provides a complete overview of this rapidly emerging field, covering basic reactive fluid dynamics as well as the latest and most complex methods and findings. It also describes and evaluates Russian contributions to the experimental explosive physics database, which only recently have become available. This book comes with downloadable resources that contain— · FORTRAN and executable computer codes that operate under Microsoft® Windows Vista operating system and the OS X operating system for Apple computers · Windows Vista and MAC compatible movies and PowerPoint presentations for each chapter · Explosive and shock wave databases generated at the Los Alamos National Laboratory and the Russian Federal Nuclear Centers Charles Mader’s three-pronged approach – through text, computer programs, and animations – imparts a thorough understanding of new computational methods and experimental measuring techniques, while also providing the tools to put these methods to effective use.
Download or read book Numerical Modeling of Turbulent Combustion in Premixed Gases written by Ahmed Fouad Zakaria Ghoniem and published by . This book was released on 1980 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
