Download or read book Clay Nanoparticles written by Giuseppe Cavallaro and published by Elsevier. This book was released on 2020-02-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay Nanoparticles: Properties and Applications sets out the major properties of clay nanoparticles and their technological applications. The first part of the book focuses on the characterization of nanoclays, including layered, fibrous and tubular clay minerals. The second part illustrates the current and potential applications of nanoclays within material science and biotechnology. These include the development of geopolymers and bionanocomposites based on sustainable polymers filled with ecocompatible nanoclay. The potential use of nanoclays as flame retardants is also discussed, along with the correlation between the properties and potential applications of several nanoclay types. In particular, the applications explored include nanoclays as drug delivery systems and for environmental protection. The book provides a complete and multidisciplinary exploration of nanoclays, highlighting a range of perspectives within current nanotechnology research. Assesses the advantages of using nanoclays instead of conventional clay materials in product design Describes the major characterization techniques – both experimental and computational – for nanoclays Explores new fabrication techniques based on pristine and modified clay nanoparticles that are being used both in materials science and biotechnology

Download or read book Clay Nanoparticles written by Giuseppe Cavallaro and published by Micro and Nano Technologies. This book was released on 2020-02-07 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay Nanoparticles: Properties and Applications sets out the major properties of clay nanoparticles and their technological applications. The first part of the book focuses on the characterization of nanoclays, including layered, fibrous and tubular clay minerals. The second part illustrates the current and potential applications of nanoclays within material science and biotechnology. These include the development of geopolymers and bionanocomposites based on sustainable polymers filled with ecocompatible nanoclay. The potential use of nanoclays as flame retardants is also discussed, along with the correlation between the properties and potential applications of several nanoclay types. In particular, the applications explored include nanoclays as drug delivery systems and for environmental protection. The book provides a complete and multidisciplinary exploration of nanoclays, highlighting a range of perspectives within current nanotechnology research. Assesses the advantages of using nanoclays instead of conventional clay materials in product design Describes the major characterization techniques - both experimental and computational - for nanoclays Explores new fabrication techniques based on pristine and modified clay nanoparticles that are being used both in materials science and biotechnology

Download or read book Nanotechnology in Nutraceuticals written by Shampa Sen and published by CRC Press. This book was released on 2016-10-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how nanotechnology can be used to develop better functional foods and nutraceuticals. Provides detailed knowledge of current development in nutraceuticals. Discusses marketing and consumer acceptance of nanomaterials. Reviews current governmental regulations.

Download or read book Poly lactic co glycolic acid PLGA Nanoparticles for Drug Delivery written by Prashant Kesharwani and published by Elsevier. This book was released on 2023-03-02 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly(lactic-co-glycolic acid) (PLGA) Nanoparticles for Drug Delivery is a comprehensive guide to PLGA nanoparticles for targeting various diseases, covering principles, formation, characterization, applications, regulations and the latest advances. Sections introduce the fundamental aspects of PLGA nanoparticles for drug delivery, including properties, preparation methods, characterization, drug loading methods, and drug release mechanisms, along with a focus on applications. Application of PLGA nanoparticles for the treatment of cancer, inflammatory, cerebral, cardiovascular, and infectious diseases, as well as in regenerative medicine, photodynamic and photothermal therapy, and gene therapy, are all explained in detail. The final chapters explore recent advances and regulatory aspects. This book is a valuable resource for researchers and advanced students across nanomedicine, polymer science, bio-based materials, chemistry, biomedicine, biotechnology, and materials engineering, as well as for industrial scientists and R&D professionals with an interest in nanoparticles for drug delivery, pharmaceutical formulations and regulations, and development of innovative biodegradable materials. Presents the fundamentals of PLGA nanoparticles, including properties, preparation, characterization, and biofate and cellular interactions Provides in-depth coverage of a broad range of specific applications of PLGA nanoparticles across disease treatment, regenerative medicine and therapeutic areas Offers a methodical approach to PLGA nanoparticles in drug delivery that is supported by data tables, illustrative figures and flowcharts

Download or read book Fundamentals of Latex Film Formation written by Joseph Keddie and published by Springer Science & Business Media. This book was released on 2010-02-18 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has emerged out of our long-time research interests on the topic of latex film formation. Over the years we have built up a repertoire of slides used in conference presentations, short courses and tutorials on the topic. The story presented in this book has thereby taken shape as it has been told and re-told to a mix of academic and industrial audiences. The book presents a wide body of work accumulated by the polymer colloids community over the past five decades, but the selection of examples has been flavoured by our particular experimental interests and development of mathematical models. We intend the book to be a starting point for academic and industrial scientists beginning research on latex film formation. The emphasis is on fundam- tal mechanisms, however, and not on applications nor on specific effects of formu- tions. We hope that the book consolidates the understanding that has been achieved to-date in the literature in a more comprehensive way than is possible in a review article. We trust that the reader will appreciate the fascination of the topic.

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Clay Minerals written by Bhaskar Ghosh and published by Springer Nature. This book was released on 2023-03-21 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive description of the application of clay minerals as disinfectants and the ingredients of medicines. While the presently available literature highlights one or two aspects of medicinal clays, a comprehensive text on all their major pharmaceutical applications is lacking. This book endeavors to fill up this lacuna. It further elucidates the properties of clay minerals that facilitate their application in the protection of human health, and how these properties are related to the chemical compositions and internal structures of selected mineral groups, thus revealing to the students, teachers and researchers the underlying relationship of seemingly different disciplines like mineralogy, material science and medical science. The thought-provoking questions added at the end of each chapter will give the readers a better insight of this subject. The tangible definitions and explanations of all the relevant scientific terms provided in this book, both within the text and in a glossary list at the end, are expected to help the beginners to develop a clear-cut understanding regarding different aspects of the subject and clear any confusion resulting from the ambiguous usage of terms in the existing literature.

Download or read book Nanoparticles in Solids and Solutions written by Janos H. Fendler and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the scientific events of the NATO Advanced Research Workshop (ARW) on The Preparation of Nanoparticles in Solutions and in Solids. The ARW was held in the second largest city in Hungary, Szeged, truthfully referred to as "the city of sunshine", from March 8 to March 13, 1996. The seventy-seven participants, including seventeen students, came from twentyone different countries. Housing all participants together and arranging a number of social activities fostered lively discussions both inside and outside of formal sessions. Twenty-one key lectures were presented in five sessions. Each session was followed by a fortyfive minutes of general discussion. One evening was devoted to the presentation of fifty-five posters. Thirty-two contribution were submitted and accepted for publication in the present volume. The volume also contains the minutes of the discussions, and a summary of the conclusions of the working groups. The ARW was organized under the auspices and financial support of NATO, City of Szeged, European Research Office of the US Army, Hungarian Academy of Sciences, Hungarian National Committee for Technological Development (OMBF), International Association of Colloid and Interface Scientists IACIS, and National Science Foundation (NSF). Both the organizers and participants gratefully acknowledge the generous support of the agencies. The Editors also thank the high quality and creative contributions of the participants. It is they who made this volume a reality. Janos H. fendler Irnre Dekany ix Glossary of Some Names and Acronyms Advanced Materials Man-made materials having superior mechanical, thennal, electrical, optical, and other desirable properties.

Download or read book Polymer Clay Nano composites written by Stefano Leporatti and published by MDPI. This book was released on 2019-10-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue focuses on the current state-of-the-art of “Polymer Clay Nano-Composites” for biomedical, anticorrosion, antibacterial, and other applications. Clay–polymer composite nanomaterials represent an emerging area of research. Loading polymers with clay particles essentially enhances the composite strength features. Of particular interest are different nano-assembly methods, such as silane mono and multilayers, polyelectrolyte layer-by-layer assembly, and others. An important development was reached for tubular and fibrous clay nanoparticles, such as halloysite, sepiolite, and imogolite. Polymer clay nanoparticles can be prepared as sheets with 1-nm thickness and width of a few hundred nm (e.g., kaolin and montmorillonite). Fibrous clays significantly reinforce the nano-composites in the assembly with biopolymers and other green polymers, leading to functional hybrid bio nano-composites. The scope of this Special Issue comprehensively includes the synthesis and characterization of polymer clay nano-composites used for several applications, including nano-clay polymer composites and hybrid nano-assemblies.

Download or read book Microbes and Microbial Biotechnology for Green Remediation written by Junaid Ahmad Malik and published by Elsevier. This book was released on 2022-06-14 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbes and Microbial Biotechnology for Green Remediation provides a comprehensive account of sustainable microbial treatment technologies. The research presented highlights the significantly important microbial species involved in remediation, the mechanisms of remediation by various microbes, and suggestions for future improvement of bioremediation technology. The introduction of contaminants, due to rapid urbanization and anthropogenic activities, into the environment causes unsteadiness and distress to the physicochemical systems, including living organisms. Hence, there is an immediate global demand for the diminution of such contaminants and xenobiotics which can otherwise adversely affect the living organisms. Over time, microbial remediation processes have been accelerated to produce better, eco-friendlier, and more biodegradable products for complete dissemination of these xenobiotic compounds. The advancements in microbiology and biotechnology lead to the launch of microbial biotechnology as a separate area of research and contributed dramatically to the development of the areas such as agriculture, environment, biopharmaceutics, and fermented foods. Microbes stand as an imperative, efficient, green, and economical alternative to conventional treatment technologies. The proposed book provides cost-effective and sustainable alternatives. This book serves as a reference for graduate and postgraduate students in environmental biotechnology and microbiology as well as researchers and scientists working in the laboratories and industries involved in research related to microbiology, environmental biotechnology, and allied research. Discusses important microbial activities, such as biofertilizer, biocontrol, biosorption, biochar, biofilm, biodegradation, bioremediation, bioclogging, and quorum sensing Covers all the advanced microbial bioremediation techniques which are finding their way from the laboratory to the field for revival of the degraded agro-ecosystems Examines the role of bacteria, fungi, microalgae, Bacillus sp., Prosopis juliflora, Deinococcus radiodurans, Pseudomonas, methanotrophs, siderophores, and PGPRs as the biocontrol and green remediator agents for soil sustainability

Download or read book Nanobiomaterials written by Roger Narayan and published by Woodhead Publishing. This book was released on 2017-09-15 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanobiomaterials: Nanostructured materials for biomedical applications covers an extensive range of topics related to the processing, characterization, modeling, and biomedical applications of nanostructured ceramics, polymers, metals, composites, self-assembled materials, and macromolecules. Novel approaches for bottom-up and top-down processing of nanostructured biomaterials are highlighted. In addition, innovative techniques for characterizing the in vitro behavior and in vivo behavior of nanostructured biomaterials are considered. Applications of nanostructured biomaterials in dentistry, drug delivery, medical diagnostics, surgery and tissue engineering are examined. Provides a concise description of the materials and technologies used in the development of nanostructured biomaterials Provides industrial researchers with an up-to-date and handy reference on current topics in the field of nanostructured biomaterials Includes an integrated approach that is used to discuss both the biological and engineering aspects of nanostructured biomaterials

Download or read book Silica and Clay Dispersed Polymer Nanocomposites written by Md Rezaur Rahman and published by Woodhead Publishing. This book was released on 2018-06-13 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of ‘polymer nanocomposites’ has recently gained considerable attention from both the academic and industrial community, especially in the area of nanoscience. This is mainly due to their enhanced improvements in physico-mechanical, thermal and barrier properties compared to micro and more conventional composites. Their nanoscale dimensions, biodegradable character, cost-effectiveness and sustainability have constituted a stimulus for this increasing interest. Currently there is no limit to the possibility of applications. However, despite all this progress, it is still difficult to achieve uniform dispersion between the filler and the matrix, as agglomerations form far too easily and the production of polymer nanocomposites with high mechanical and thermal properties is still limited. The authors of this proposed book, are of the opinion, that with the increase in scientific publications and the rapid progress in processing possibilities to produce nanocomposites based on various nanoscale fillers (silica/clay), a book that collects all of these scientific findings in one place would be timely and of great interest to both students and scientific researchers, who are concerned with the production, and application of nanocomposites as new innovative materials. The authors aim is to present the latest research findings on the fabrication, properties and applications of nanofillers as reinforcement in polymer nanocomposites. Particular emphasis will be placed on the introduction of various nanofillers (silica/clay) into different elastomeric polymer matrices that will enhance the properties of these materials and their applications. The book will provide an up-to-date review of major innovations in the field and act as a reference for future research in materials science and engineering, which is highly topical due to the demand to produce more sustainable and eco-friendly innovative advanced materials from elastomeric polymers. Emphasis on silica/clay as outstanding reinforcing potential in elastomeric polymer matrices Up-to-date on the most relevant innovations in the field of silica/clay nanocomposites and their extensive applications in advanced material science Establishes the most suitable fabrication methods, properties and applications as a solid foundation in materials science and engineering disciplines Includes the incorporation of dual nanofillers that significantly improve the properties of nanocomposites

Download or read book Nanotechnology and Functional Materials for Engineers written by Yaser Dahman and published by Elsevier. This book was released on 2017-01-13 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology and Functional Materials for Engineers focuses on key essentials and examples across the spectrum of nanomaterials as applied by engineers, including nanosensors, smart nanomaterials, nanopolymers, and nanotubes. Chapters cover their synthesis and characteristics, production methods, and applications, with specific sections exploring nanoelectronics and electro-optic nanotechnology, nanostructures, and nanodevices. This book is a valuable resource for interdisciplinary researchers who want to learn more about how nanomaterials are used in different types of engineering, including electrical, chemical, and biomedical. Offers in-depth information on a variety of nanomaterials and how they are used for different engineering applications Provides an overview of current research and suggests how this will impact future applications Explores how the unique properties of different nanomaterials make them particularly suitable for specific applications

Download or read book Postharvest Nanotechnology for Fresh Horticultural Produce written by Radhakrishnan E.K. and published by CRC Press. This book was released on 2023-12-29 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food scarcity and insecurity is an alarming issue throughout the world. Postharvest loss due to both mechanical damage and microbial spoilage significantly influences the shelf life and hence the availability of agricultural produce. Once initiated, the microbial spoilage can make bulk quantity of a given agricultural product unacceptable for human consumption, and several methods have already been used to try to manage this. Considering the limited success of the available methods, there is increasing interest in exploring nanotechnological methods. These methods are being considered for both the development of various platforms for antimicrobial/barrier packaging applications that minimize the contact of agricultural produce with the external environment, and also for design sensors to ensure food safety and quality. The impact of various nano-systems developed through material engineering on the shelf-life enhancement and storage of fresh horticultural produce will have revolutionary effects on post-harvest management in the coming years. Hence, Postharvest Nanotechnology for Fresh Horticultural Produce has been edited to advance understanding of material development, intelligent selection of nanomaterials to ensure the nontoxic nature, and future perspectives of nanotechnology on postharvest produce. This includes various types of nanoparticles exploited for the postharvest management, their mechanism of action, varied applications and material engineering, along with natural products including essential oils and plant bioactives, modelling of various tailor-made materials to meet the required properties of the packed food, advancements in the nanotechnological applications for the minimally processed food, and the toxicity concerns. Key Features: · Describes advances in nanotechnology for postharvest management · Includes extensive details on the applications of material engineering for post-harvest applications using nanotechnology and future aspects · Provides extensive data on the types of nanomaterials used and the fabrication methods employed for the design of tailor-made products for the post-harvest management This book reviews the current scientific advancements and future prospects of the nanotechnological interventions in meeting the quality and quantity standards of the horticultural produce and minimally processed food and will be a valuable reference for beginners, researchers, subject experts, and industrialists.

Download or read book Dekker Encyclopedia of Nanoscience and Nanotechnology written by James A. Schwarz and published by CRC Press. This book was released on 2004 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Nanotechnology written by Yashwant V. Pathak and published by John Wiley & Sons. This book was released on 2022-03-04 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Nanotechnology A robust examination of the use of nanotechnology in the manufacture of sustainable products In Sustainable Nanotechnology: Strategies, Products, and Applications, a team of distinguished researchers delivers a comprehensive and up-to-date exploration of nanotechnology applications in environmental, pharmaceutical, and engineering products in the context of global sustainability. The book offers balanced coverage of the benefits and risks of nanotechnology. Divided into three parts, the editors have included contributions from leading scholars discussing sustainability, toxicological impacts, and nanomaterial-based adsorbents. This edited volume helps readers understand how nanotechnology and nanomaterials apply in different global sustainability challenges. It also discusses models for understanding the lifecycle and risk assessments of manufactured nanomaterials. Case studies are included to explore such topics as design, remediation, and technology assessment. The book also provides: Thorough introductions to nanotechnology-based research priorities for global sustainability and the challenges and opportunities of modern, sustainable nanotechnology Comprehensive explorations of improving the sustainability of bio-based products with nanotechnology and the improvement of the environmental sustainability of biopolymers using nanotechnology Practical discussions of nanotechnology-based polymers for drug delivery applications In-depth examinations of green nanotechnology-driven drug delivery systems Perfect for nanotechnology-focused professionals, sustainability experts, biomedical experts, and pharmaceutical industry practitioners, Sustainable Nanotechnology: Strategies, Products, and Applications will also earn a place in the libraries of neuroscientists, bioengineering professionals, and those involved in neuroprosthetic engineering.

Download or read book Challenges and Innovations in Ocean In Situ Sensors written by Eric Delory and published by Elsevier. This book was released on 2018-09-21 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges and Innovations in Ocean In-Situ Sensors: Measuring Inner Ocean Processes and Health in the Digital Age highlights collaborations of industry and academia in identifying the key challenges and solutions related to ocean observations. A new generation of sensors is presented that addresses the need for higher reliability (e.g. against biofouling), better integration on platforms in terms of size and communication, and data flow across domains (in-situ, space, etc.). Several developments are showcased using a broad diversity of measuring techniques and technologies. Chapters address different sensors and approaches for measurements, including applications, quality monitoring and initiatives that will guide the need for monitoring. Integrates information across key marine and maritime sectors and supports regional policy requirements on monitoring programs Offers tactics for enabling early detection and more effective monitoring of the marine environment and implementation of appropriate management actions Presents new technologies driving the next generation of sensors, allowing readers to understand new capabilities for monitoring and opportunities for another generation of sensors Includes a global vision for ocean monitoring that fosters a new perspective on the direction of ocean measurements