Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.
Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by Seymour Lowell and published by Springer Science & Business Media. This book was released on 2006-04-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.
Download or read book Characterization of Porous Solids and Powders written by and published by . This book was released on 2006 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adsorption by Powders and Porous Solids written by Jean Rouquerol and published by Academic Press. This book was released on 2013-09-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites. - Provides a comprehensive treatment of adsorption at both the gas/solid interface and the liquid/solid interface - Includes chapters dealing with experimental methodology and the interpretation of adsorption data obtained with porous oxides, carbons and zeolites - Techniques capture the importance of heterogeneous catalysis, chemical engineering and the production of pigments, cements, agrochemicals, and pharmaceuticals
Download or read book Characterization of Porous Solids written by H. Kral and published by Elsevier. This book was released on 1988-04-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of porosity has long been recognized by scientists and engineers. Porous solids are widely encountered in industry and everyday life and their behaviour, e.g. chemical reactivity, adsorptive capacity, and catalytic activity is dependent on their pore structure. A considerable amount of work on porous solids has been undertaken both in academic and in industrial laboratories. However, all this activity is in urgent need of a critical appraisal. To undertake this task, a number of leading experts in the field of adsorption, porosimetry, X-ray and neutron scattering, optical and electron microscopy, calorimetry and fluid permeation, were brought together at the 1987 IUPAC (COPS I) Symposium.This proceedings volume provides an up-to-date overall review of the theoretical foundations for modelling and characterizing porous systems. It deals with most of the techniques in current use as applied to both model systems and porous solids of industrial importance. The reader will find the description and discussion of a number of novel techniques as well as a critical appraisal and comparison of the more established methods. All those concerned with the characterization of porous solids in academic and industrial laboratories will find much to interest them in this volume. It should be on the bookshelf of applied research centres involved in adsorption, catalysis, purification of gases and liquids, pigments, fillers, building materials, etc.
Download or read book Powder Surface Area and Porosity written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity and density of powders. It may be found useful by those with little or no training in solid surfaces who have the need to quickly learn the rudiments of surface area, density and pore-size measurements. Syosset, New York S. Lowell May, 1983 J. E. Shields Xl List of symbols Use of symbols for purposes other than those indicated in the following list are so defined in the text. Some symbols not shown in this list are defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential f permeability aspect factor F flow rate; force; feed rate 9 gravitational constant G Gibbs free energy GS free surface energy h heat of immersion per unit area; height H enthalpy Hi heat of immersion Hsv heat of adsorption BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant I length L heat of liquefaction M mass M molecular weight n number of moles N number of molecules; number of particles N Avagadro's number .
Download or read book Characterisation of Porous Solids VIII written by Nigel Seaton and published by Royal Society of Chemistry. This book was released on 2009-03-10 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is the Proceedings of the 8th International Symposium on the Characterisation of Porous Solids, known also as "COPS VIII". The conference is one of a series, held every three years, which covers developments in methods for the characterisation of porous materials, and applications of those methods. The scope of the conference: COPS VIII is concerned with fundamental and applied research on the characterisation of the structure of porous materials, and the relationship between structure and material performance. The scope includes experimental characterisation methods such as X-Ray diffraction, NMR, adsorption, mercury intrusion, and calorimetry; theoretical and simulation methods used to interpret experimental data, such as molecular simulation, classical and statistical mechanical theory, and pore network modelling; and applied research on the impact of measured material properties on performance in applications.
Download or read book Characterization of Porous Solids II written by KK Unger and published by Elsevier. This book was released on 1991-04-19 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second IUPAC Symposium on the Characterization of Porous Solids (COPS-II) provided the opportunity for detailed discussion and appraisal of the most important techniques currently used for the characterization of porous materials, especially those of technological importance. The 82 selected papers and reviews contained in this volume are mainly concerned with the theoretical and experimental aspects of adsorption, fluid penetration, small-angle scattering and spectroscopic methods with their application in the study of adsorbents, catalysts, constructional materials, etc. Particular attention is given to the characterization of carbons, oxides, zeolites, clays, cement and polymers. The wide range of materials and techniques described in this book provide a useful and comprehensive reference source for academic and industrial scientists and technologists.
Download or read book Characterization of Porous Solids written by and published by . This book was released on 1988 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Porous Solids VI written by and published by Elsevier. This book was released on 2002-11-14 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 99 of the papers that were presented at the 6th in the series of Symposia on Characterization of Porous Solids held in Alicante, Spain, May 2002. Written by leading international specialists in the subject, the contributions represent an up-to-date and authoritative account of recent developments around the world in the major methods used to characterize porous solids. The book is a useful work of reference for anyone interested in characterizing porous solids, such as MCM-41 mesoporous materials, pillared clays, etc. Papers on pore structure determination using gas adsorption feature strongly, together with papers on small angle scattering methods, mercury porosimetry, microcalorimetry, scanning probe microscopies, and image analysis.
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Porous Materials written by Peisheng Liu and published by Elsevier. This book was released on 2014-08-12 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers and scientists alike will find this book to be an excellent introduction to the topic of porous materials, in particular the three main groups of porous materials: porous metals, porous ceramics, and polymer foams. Beginning with a general introduction to porous materials, the next six chapters focus on the processing and applications of each of the three main materials groups. The book includes such new processes as gel-casting and freeze-drying for porous ceramics and self-propagating high temperature synthesis (SHS) for porous metals. The applications discussed are relevant to a wide number of fields and industries, including aerospace, energy, transportation, construction, electronics, biomedical and others. The book concludes with a chapter on characterization methods for some basic parameters of porous materials. Porous Materials: Processing and Applications is an excellent resource for academic and industrial researchers in porous materials, as well as for upper-level undergraduate and graduate students in materials science and engineering, physics, chemistry, mechanics, metallurgy, and related specialties. A comprehensive overview of processing and applications of porous materials – provides younger researchers, engineers and students with the best introduction to this class of materials Includes three full chapters on modern applications - one for each of the three main groups of porous materials Introduces readers to several characterization methods for porous materials, including methods for characterizing pore size, thermal conductivity, electrical resistivity and specific surface area
Download or read book Characterisation of Porous Solids V written by G. Kreysa and published by Elsevier. This book was released on 2000-04-11 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Symposium on the Characterisation of Porous Solids (COPS-V) was held at Heidelberg, Germany, from May 30 to June 2, 1999. About 220 participants from 25 countries enjoyed a very successful meeting with 32 lectures and 155 poster presentations. The Symposium started with a highly stimulating lecture by Sir John Meurig Thomas, Cambridge, highlighting the recent developments in engineering of new catalysts. The following two full sessions were devoted to theory, modelling and simulation which provide the basis for the interpretation of pore structural data of adsorbents and finely dispersed solids. Sessions 2 and 3 focused on the advances in the synthesis and characterisation of highly ordered inorganic adsorbents and carbons. Sessions 4 and 5 addressed important questions with respect to the characterisation of porous solids by sorption measurement and other related techniques. The intensive three-day programme provided a stimulating forum for the exchange of novel research findings, concepts, techniques and materials which are collected in this volume.
Download or read book Porous Materials written by Juan Carlos Moreno-Piraján and published by Springer Nature. This book was released on 2021-03-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written in honor of Prof. Francisco Rodriguez-Reinoso, who has made significant contributions in the area of porous materials such as active carbons and graphenes. It details the preparation of porous materials, including carbonaceous, zeolitic, and siliceous materials, MOFs, aerogels, and xerogels, describing the characterization techniques and the interpretation of the results, and highlighting common errors that can occur during the process. This book subsequently presents the use of modeling based on thermodynamics to describe the materials. Lastly, it illustrates a number of current environmental protection applications in the context of both water and air.
Download or read book Characterization of Porous Solids written by and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Functional Porous Materials written by Arya Uthaman and published by Springer Nature. This book was released on 2021-11-13 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents synthesis, characterization, and applications of macroporous, mesoporous, nanoporous, hierarchical porous, porous metals, and porous ceramics. Special emphasis is given to the preparation of porous activated carbon materials and porous ionic liquid-derived materials for CO2 emissions mitigation. Additionally, a chapter includes the physical and mathematical modeling in porous media. Many analytical techniques for characterization are discussed in this book. Also, the biomedical and industrial applications of porous materials in adsorption, catalysis, biosensors, drug delivery, nanotechnology are described. The content helps solving fundamental and applied problems in porous materials with length scales varying from macro- to nano-level.
Download or read book Experimental Methods and Instrumentation for Chemical Engineers written by Gregory S. Patience and published by Elsevier. This book was released on 2017-09-08 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Methods and Instrumentation for Chemical Engineers, Second Edition, touches many aspects of engineering practice, research, and statistics. The principles of unit operations, transport phenomena, and plant design constitute the focus of chemical engineering in the latter years of the curricula. Experimental methods and instrumentation is the precursor to these subjects. This resource integrates these concepts with statistics and uncertainty analysis to define what is necessary to measure and to control, how precisely and how often.The completely updated second edition is divided into several themes related to data: metrology, notions of statistics, and design of experiments. The book then covers basic principles of sensing devices, with a brand new chapter covering force and mass, followed by pressure, temperature, flow rate, and physico-chemical properties. It continues with chapters that describe how to measure gas and liquid concentrations, how to characterize solids, and finally a new chapter on spectroscopic techniques such as UV/Vis, IR, XRD, XPS, NMR, and XAS. Throughout the book, the author integrates the concepts of uncertainty, along with a historical context and practical examples.A problem solutions manual is available from the author upon request. - Includes the basics for 1st and 2nd year chemical engineers, providing a foundation for unit operations and transport phenomena - Features many practical examples - Offers exercises for students at the end of each chapter - Includes up-to-date detailed drawings and photos of equipment
