Download or read book Characterisation and modelling of strain induced precipitation written by and published by . This book was released on 2006 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical and Physical Simulation of the Properties of Hot Rolled Products written by Maciej Pietrzyk and published by Elsevier. This book was released on 1999-07-05 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this publication is to comprehensively discuss the possibilities of producing steels with pre-determined attributes, demanded by the customer to fit exacting specifications. The information presented in the book has been designed to indicate the reasons for the expenses and to aid in the process of overcoming the difficulties and reducing the costs. In nine detailed chapters, the authors cover topics including: • steel as a major contributor to the economic wealth of a country in terms of its capabilities and production • current concerns of major steel producers • phenomena contributing to the quality of the product • information concerning the boundary conditions of the rolling process and initial conditions, put to use by mathematical models • the solid state incremental approach and flow formulation • parameters and variables - most of which make use of the exponential nature of phenomena that are activated by thermal energy • the application of three dimensional analysis to shape rolling • the evaluation of parameters by a form of inverse analysis to the flat rolling process • knowledge based modeling, using artificial intelligence, expert systems and neural networks They conclude that when either mathematical or physical modeling of the rolling process is considered and the aim is to satisfy the demands for customers, it is possible to produce what the customer wants, exactly.
Download or read book Development of Methods for the Characterisaton and Modelling of Precipitation in Steels written by and published by . This book was released on 2004 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Anthology on Synthesis Characterization and Applications of Nanomaterials written by Management Association, Information Resources and published by IGI Global. This book was released on 2021-03-19 with total page 1917 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of nanotechnologies continues to grow, as nanomaterials have proven their versatility and use in many different fields and industries within the scientific profession. Using nanotechnology, materials can be made lighter, more durable, more reactive, and more efficient leading nanoscale materials to enhance many everyday products and processes. With many different sizes, shapes, and internal structures, the applications are endless. These uses range from pharmaceutics to materials such as cement or cloth, electronics, environmental sustainability, and more. Therefore, there has been a recent surge of research focused on the synthesis and characterizations of these nanomaterials to better understand how they can be used, their applications, and the many different types. The Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials seeks to address not only how nanomaterials are created, used, or characterized, but also to apply this knowledge to the multidimensional industries, fields, and applications of nanomaterials and nanoscience. This includes topics such as both natural and manmade nanomaterials; the size, shape, reactivity, and other essential characteristics of nanomaterials; challenges and potential effects of using nanomaterials; and the advantages of nanomaterials with multidisciplinary uses. This book is ideally designed for researchers, engineers, practitioners, industrialists, educators, strategists, policymakers, scientists, and students working in fields that include materials engineering, engineering science, nanotechnology, biotechnology, microbiology, drug design and delivery, medicine, and more.
Download or read book Multiscale Modelling and Optimisation of Materials and Structures written by Tadeusz Burczynski and published by John Wiley & Sons. This book was released on 2022-05-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the very topical, crucial and original subject of parameter identification and optimization within multiscale modeling methods Multiscale Modelling and Optimization of Materials and Structures presents an important and challenging area of research that enables the design of new materials and structures with better quality, strength and performance parameters as well as the creation of reliable models that take into account structural, material and topological properties at different scales. The authors’ approach is four-fold; 1) the basic principles of micro and nano scale modeling techniques; 2) the connection of micro and/or nano scale models with macro simulation software; 3) optimization development in the framework of multiscale engineering and the solution of identification problems; 4) the computer science techniques used in this model and advice for scientists interested in developing their own models and software for multiscale analysis and optimization. The authors present several approaches such as the bridging and homogenization methods, as well as the general formulation of complex optimization and identification problems in multiscale modelling. They apply global optimization algorithms based on robust bioinspired algorithms, proposing parallel and multi-subpopulation approaches in order to speed-up computations, and discuss several numerical examples of multiscale modeling, optimization and identification of composite and functionally graded engineering materials and bone tissues. Multiscale Modelling and Optimization of Materials and Structures is thereby a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs and implement them into simulation systems. Describes micro and nano scale models developed by the authors along with case studies of analysis and optimization Discusses the problems of computing costs, efficiency of information transfer, effective use of the computer memory and several other aspects of development of multiscale models Includes real physical, chemical and experimental studies with modern experimental techniques Provides a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs, and implement them into simulation systems.
Download or read book Computational Materials Engineering written by Maciej Pietrzyk and published by Butterworth-Heinemann. This book was released on 2015-07-14 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Materials Engineering: Achieving High Accuracy and Efficiency in Metals Processing Simulations describes the most common computer modeling and simulation techniques used in metals processing, from so-called "fast" models to more advanced multiscale models, also evaluating possible methods for improving computational accuracy and efficiency. Beginning with a discussion of conventional fast models like internal variable models for flow stress and microstructure evolution, the book moves on to advanced multiscale models, such as the CAFÉ method, which give insights into the phenomena occurring in materials in lower dimensional scales. The book then delves into the various methods that have been developed to deal with problems, including long computing times, lack of proof of the uniqueness of the solution, difficulties with convergence of numerical procedures, local minima in the objective function, and ill-posed problems. It then concludes with suggestions on how to improve accuracy and efficiency in computational materials modeling, and a best practices guide for selecting the best model for a particular application. - Presents the numerical approaches for high-accuracy calculations - Provides researchers with essential information on the methods capable of exact representation of microstructure morphology - Helpful to those working on model classification, computing costs, heterogeneous hardware, modeling efficiency, numerical algorithms, metamodeling, sensitivity analysis, inverse method, clusters, heterogeneous architectures, grid environments, finite element, flow stress, internal variable method, microstructure evolution, and more - Discusses several techniques to overcome modeling and simulation limitations, including distributed computing methods, (hyper) reduced-order-modeling techniques, regularization, statistical representation of material microstructure, and the Gaussian process - Covers both software and hardware capabilities in the area of improved computer efficiency and reduction of computing time
Download or read book TMS 2012 141st Annual Meeting and Exhibition Materials Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2012-05-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains chapters on cutting-edge developments presented at the TMS annual conference of 2012.
Download or read book C H N and O in Si and Characterization and Simulation of Materials and Processes written by A. Borghesi and published by Newnes. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 200 papers, this volume contains the proceedings of two symposia in the E-MRS series. Part I presents a state of the art review of the topic - Carbon, Hydrogen, Nitrogen and Oxygen in Silicon and in Other Elemental Semiconductors. There was strong representation from the industrial laboratories, illustrating that the topic is highly relevant for the semiconductor industry. The second part of the volume deals with a topic which is undergoing a process of convergence with two concerns that are more particularly application oriented. Firstly, the advanced instrumentation which, through the use of atomic force and tunnel microscopies, high resolution electron microscopy and other high precision analysis instruments, now allows for direct access to atomic mechanisms. Secondly, the technological development which in all areas of applications, particularly in the field of microelectronics and microsystems, requires as a result of the miniaturisation race, a precise mastery of the microscopic mechanisms.
Download or read book Handbook of Thermal Process Modeling Steels written by Cemil Hakan Gur and published by CRC Press. This book was released on 2008-12-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work
Download or read book Welding and Joining of Aerospace Materials written by Mahesh Chaturvedi and published by Elsevier. This book was released on 2011-12-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welding and joining techniques play an essential role in both the manufacture and in-service repair of aerospace structures and components, and these techniques become more advanced as new, complex materials are developed. Welding and joining of aerospace materials provides an in-depth review of different techniques for joining metallic and non-metallic aerospace materials.Part one opens with a chapter on recently developed welding techniques for aerospace materials. The next few chapters focus on different types of welding such as inertia friction, laser and hybrid laser-arc welding. The final chapter in part one discusses the important issue of heat affected zone cracking in welded superalloys. Part two covers other joining techniques, including chapters on riveting, composite-to-metal bonding, diffusion bonding and recent improvements in bonding metals. Part two concludes with a chapter focusing on the use of high-temperature brazing in aerospace engineering. Finally, an appendix to the book covers the important issue of linear friction welding.With its distinguished editor and international team of contributors, Welding and joining of aerospace materials is an essential reference for engineers and designers in the aerospace, materials and welding and joining industries, as well as companies and other organisations operating in these sectors and all those with an academic research interest in the subject. - Provides an in-depth review of different techniques for joining metallic and non-metallic aerospace materials - Discusses the important issue of heat affected zone cracking in welded superalloys - Covers many joining techniques, including riveting, composite-to-metal bonding and diffusion bonding
Download or read book HSLA Steels 2015 Microalloying 2015 Offshore Engineering Steels 2015 written by The Chinese Society for Metals and published by Springer. This book was released on 2017-03-22 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015). The papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further development in the fields all over the world.
Download or read book Characterization of Materials 2 Volume Set written by Elton N. Kaufmann and published by Wiley-Interscience. This book was released on 2003-01-31 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Materials (formerly Methods in Materials Research) provides comprehensive up-to-date coverage of materials characterization techniques including computational and theoretical methods as well as crystallography, mechanical testing, thermal analysis, optical imaging and spectroscopy, and more. Editor-in-Chief, Elton Kaufmann, Ph.D. is Associate Director of the Strategic Planning Group at the Argonne National Laboratory and has published approximately 100 technical papers in refereed journals and books. Dr. Kaufmann has assembled leading experts from academia, government, and industry to provide: A comprehensive up-to-date collection of methods used in the characterization of materials Articles on various methods from standard to cutting edge Periodic online updates to keep pace with latest developments A user-friendly format that is easy and simple to search and navigate Characterization of Materials is a collection of characterization methods that is widely applicable in the wide and diverse field of materials research irrespective of discipline or ultimate application and with which researchers, engineers, and educators must have familiarity. Methods covered include: General Vacuum Techniques X-Ray Powder Diffraction High Strain Rate Testing Deep Level Transient Spectroscopy Cyclic Voltammetry Extended X-Ray Absorption Fine Structure Low Energy Electron Diffraction Thermogravimetric Analysis Magnetometry Transmission Electron Microscopy Ultraviolet Photoelectron Spectroscopy This reference work is also available as a convenient online edition. For information regarding the online edition, please visit: www.mrw.interscience.wiley.com/com
Download or read book TMS 2011 140th Annual Meeting and Exhibition Materials Fabrication Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the most up-to-date information on the state of Materials Fabrication, Properties, Characterization, and Modeling. It's a great mix of practical applied technology and hard science, which is of invaluable benefit to the global industry.
Download or read book Role of Characterization in Understanding Environmental Degradation of Materials written by International Metallographic Society. Technical Meeting and published by ASM International(OH). This book was released on 1998 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a July 1997 convention, covering both traditional and newer characterization techniques for understanding environmental degradation. Contains sections on corrosion characterization of materials behavior and performance, corrosion of materials in water and marine environments, surface
Download or read book Materials Characterization for Systems Performance and Reliability written by James W. McCauley and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sagamore Army Materials Research Conferences have been held in the beautiful Adirondack Mountains of New York State since 1954. Organized and conducted by the Army Materials and Mechanics Research Center (Watertown, Massachusetts) in cooperation with Syracuse University, the Conferences have focused on key issues in Materials Science and Engineering that impact directly on current or future Army problem areas. A select group of speakers and attendees are assembled from academia, industry, and other parts of the Department of Defense and Government to provide an optimum forum for a full dialogue on the selected topic. This book is a collection of the full manuscripts of the formal presentations given at the Conference. The emergence and use of nontraditional materials and the excessive failures and reject rates of high technology, materials intensive engineering systems necessitates a new approach to quality control. Thus, the theme of this year's Thirty-First Conference, "Materials Characterization for Systems Performance and Reliability," was selected to focus on the need and mechanisms to transition from defect interrogation of materials after production to utilization of materials characterization during manufacturing. The guidance and help of the steering committee and the dedicated and conscientious efforts of Ms. Karen Ka100stian, Con ference Coordinator, and Mr. William K. Wilson, and Ms. Mary Ann Holmquist are gratefully acknowledged. The continued active interest and support of Dr. Edward S. Wright, Director, AMMRC; Dr. Robert W. Lewis, Associate Director, AMMRC; and COL L. C. Ross, Commander/ Deputy Director, AMMRC; are greatly appreciated.
Download or read book Characterization of Minerals Metals and Materials 2013 written by Jiann-Yang Hwang and published by John Wiley & Sons. This book was released on 2013-02-01 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of proceedings from one of the most popular TMS symposia explores the current progress in the characterization of materials. Addressing technologies, applications, and innovative research, these papers cover definations of ferrous and nonferrous metals and alloys, minerals, advanced and soft materials, and inorganic materials. Extraction and environmental applications, as well as surface, joint, and processing of metals. This is a valuable reference for scientists and engineers working with materials in the minerals, metals, and materials industry.
Download or read book Multiscale Phenomena in Plasticity From Experiments to Phenomenology Modelling and Materials Engineering written by Joël Lépinoux and published by Springer Science & Business Media. This book was released on 2000-05-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The various scales of the physical phenomena occurring during plastic flow are reviewed from the atomic level to the constitutive laws, from both theoretical and experimental sides. The fundamentals of plastic flow are revisited, revealing the impact of recent experimental breakthroughs on the theoretical formulation. New developments (constrained plasticity, indentation) are also addressed. The importance of atomic scale phenomena on macroscopic mechanical behaviour are demonstrated in the case of cross-slip and its influence on fatigue properties, and in the effect of hydrogen on ductility. These developments emphasise the importance of the numerical methods used to connect the various scales and show that much remains to be done in this area. Classical fundamental problems, such as the brittle to ductile transition, are described by both experimentalists and theoreticians, as are constrained and heterogeneous deformation.
