Download or read book Ceramics for High Performance Applications III written by E.M. Lenoe and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sixth Army Materials Technology Conference, IICeramics for High Performance Applications-II I-Reliabilityll , was co-sponsored by the Army Materials and Mechanics Research Center and the U. S. Department of Energy, Office of Transportation Programs . The program highlighted all issues relevant to the reliability of ceramics in advanced systems. The conference emphasized programmatic reviews of the major efforts on ceramic gas turbine technology, on an international basis. The conference showed how ceramic design, materials development, materials processing, NDE, and component systems testing are being integrated and iterated in specific engine development programs . Further , the conference promoted inter change among the various technical disciplines working in the advanced turbine and heat engine areas. This volume will join its earlier companions, Ceramics for High Performance A lications (1974), and Ceramics for High Performance Applications-II 1 7 ,in chronicling the rapid progress being made in the applicaton of ceramics to the very demanding service environ ment of gas turbine and piston engines. At the last meeting of this series at Newport, R t, in March 1977, successful high temperature tests of ceramic components in test rigs were described.
Download or read book Ceramics for High performance Applications written by John J. Burke and published by . This book was released on 1974 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra High Temperature Ceramics written by William G. Fahrenholtz and published by John Wiley & Sons. This book was released on 2014-10-10 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book to focus on ultra-high temperature ceramic materials in more than 20 years Ultra-High Temperature Ceramics are a family of compounds that display an unusual combination of properties, including extremely high melting temperatures (>3000°C), high hardness, and good chemical stability and strength at high temperatures. Typical UHTC materials are the carbides, nitrides, and borides of transition metals, but the Group IV compounds (Ti, Zr, Hf) plus TaC are generally considered to be the main focus of research due to the superior melting temperatures and stable high-melting temperature oxide that forms in situ. Rather than focusing on the latest scientific results, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications broadly and critically combines the historical aspects and the state-of-the-art on the processing, densification, properties, and performance of boride and carbide ceramics. In reviewing the historic studies and recent progress in the field, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications provides: Original reviews of research conducted in the 1960s and 70s Content on electronic structure, synthesis, powder processing, densification, property measurement, and characterization of boride and carbide ceramics. Emphasis on materials for hypersonic aerospace applications such as wing leading edges and propulsion components for vehicles traveling faster than Mach 5 Information on materials used in the extreme environments associated with high speed cutting tools and nuclear power generation Contributions are based on presentations by leading research groups at the conference "Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications II" held May 13-19, 2012 in Hernstein, Austria. Bringing together disparate researchers from academia, government, and industry in a singular forum, the meeting cultivated didactic discussions and efforts between bench researchers, designers and engineers in assaying results in a broader context and moving the technology forward toward near- and long-term use. This book is useful for furnace manufacturers, aerospace manufacturers that may be pursuing hypersonic technology, researchers studying any aspect of boride and carbide ceramics, and practitioners of high-temperature structural ceramics.
Download or read book Ceramics for High Performance Applications II written by and published by . This book was released on 1978 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Tech Ceramics written by Gernot Kostorz and published by Elsevier. This book was released on 2016-07-29 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-tech ceramics pose many challenges to the scientist and engineer because of their demanding production and processing requirements. Leading experts in the field address these problems not only from a fundamental scientific point of view but with particular reference to a broad range of engineering applications.This edited volume is based on invited talks given at a symposium held at the ETH Zurich in November, 1988, sponsored by the International Latsis Foundation of Geneva.
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book Silicon Carbide Ceramics 1 written by S. Somiya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered by Edward G. Acheson about 1890, silicon carbide is one of the oldest materials and also a new material. It occurs naturally in meteorites, but in very small amounts and is not in a useable state as an industrial material. For industrial require ments, large amounts of silicon carbide must be synthesized by solid state reactions at high temperatures. Silicon carbide has been used for grinding and as an abrasive material since its discovery. During World War II, silicon carbide was used as a heating element; however, it was difficult to obtain high density sintered silicon carbide bodies. In 1974, S. Prochazka reported that the addition of small amounts of boron compounds and carbide were effective in the sintering process to obtain high density. It was then possible to produce high density sintered bodies by pressureless sintering methods in ordinary atmosphere. Since this development, silicon carbide has received great attention as one of the high temperature structural ceramic materials. Since the 1970s, many research papers have appeared which report studies of silicon carbide and silicon nitride for structural ceramics.
Download or read book High performance Sustainable Materials and Structures written by Prince Lazar and published by Springer Nature. This book was released on with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Ceramic Engineering written by David W. Richerson and published by CRC Press. This book was released on 2005-11-04 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic materials have proven increasingly important in industry and in the fields of electronics, communications, optics, transportation, medicine, energy conversion and pollution control, aerospace, construction, and recreation. Professionals in these fields often require an improved understanding of the specific ceramics materials they are using
Download or read book Electroceramics for High Performance Supercapicitors written by Inamuddin and published by John Wiley & Sons. This book was released on 2023-10-13 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: ELECTROCERAMICS FOR HIGH PERFORMANCE SUPERCAPACITORS The book describes the state-of-the-art analyses of high-density supercapacitors. In the near future, high-energy density materials will be required to accommodate the increased demand for gadgets, hybrid cars, and massive electrical energy storage systems. Fuel cells, supercapacitors, and batteries have the highest energy densities, but traditional capacitors have gained attention for intermittent energy harvesting owing to their high energy transfer rate and quick charging/discharging capability. The large amount of electric breakdown strength and modest remnant polarization are keys to the high energy density in dielectric capacitors. Above 100??C or 212??F, polymer dielectric capacitors become unstable and begin to suffer a dielectric breakdown. Hence, dielectric ceramics are the sole viable option for high-temperature applications. This book provides a basic understanding of dielectric-based energy harvesting. After a detailed analysis of the state-of-the-art, it proceeds to explain the specific strategies to enhance energy storage features, including managing the local structure and phases assembly, raising the dielectric width, and enhancing microstructure and electrical uniformity. Also discussed is the need for novel materials with applications in high-density supercapacitors. Audience The book is designed for engineers, industrialists, physicists, scientists, and researchers who work on the applications of high-density supercapacitors.
Download or read book 12th Automative Materials Conference Volume 5 Issue 5 6 written by William J. Smothers and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Concise Encyclopedia of Advanced Ceramic Materials written by R.J. Brook and published by Elsevier. This book was released on 2012-12-02 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ceramics cover a wide range of materials which are ceramic by nature but have been developed in response to specific requirements. This encyclopedia collects together 137 articles in order to provide an up-to-date account of the advanced ceramic field. Some articles are drawn from the acclaimed Encyclopedia of Materials Science and Engineering, often revised, and others have been newly commissioned. The Concise Encyclopedia of Advanced Ceramic Materials aims to provide a comprehensive selection of accessible articles which act as an authoritative guide to the subject. The format is designed to help the readers form opinions on a particular subject. Arranged alphabetically, with a broad subject range, the articles are diverse in character and style, thereby stimulating further discussion. Topics covered include survey articles on glass, hot pressing, insulators, powders, and many are concerned with specific chemical systems and their origins, processing and applications. The Concise Encyclopedia of Advanced Ceramic Materials will be invaluable to materials scientists, researchers, educators and industrialists working in technical ceramics.
Download or read book Structural Ceramics written by John Jr. Wachtman and published by Elsevier. This book was released on 2012-12-02 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 29: Structural Ceramics presents an overview of structural ceramics. This book begins with a survey of potential uses, designs, and barriers of particular types of structural ceramics. The silicon carbide family, silicon nitride and sialon family, and transformation toughened ceramics are discussed in detail, followed by an analysis of the various processing routes of each family of structural ceramics. This publication concludes with a review of the tribology of structural ceramics, considering many applications for structural ceramics in heat engines and other machinery that involve moving parts which must often resist wear or erosion. This volume is recommended for engineers, scientists, and researchers concerned with structural ceramics.
Download or read book Classic and Advanced Ceramics written by Robert B. Heimann and published by John Wiley & Sons. This book was released on 2010-04-16 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's lectures to graduate students of geosciences, physics, chemistry and materials science, this didactic handbook covers basic aspects of ceramics such as composition and structure as well as such advanced topics as achieving specific functionalities by choosing the right materials. The focus lies on the thermal transformation processes of natural raw materials to arrive at traditional structural ceramics and on the general physical principles of advanced functional ceramics. The book thus provides practice-oriented information to readers in research, development and engineering on how to understand, make and improve ceramics and derived products, while also serving as a rapid reference for the practitioner. The choice of topics and style of presentation make it equally useful for chemists, materials scientists, engineers and mineralogists.
Download or read book Progress in Nitrogen Ceramics written by F.L. Riley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first NATO Advanced Study Institute on Nitrogen Ceramics held in 1976 at Canterbury came at a particularly significant moment in the development of this subject. The five-year period, 1971-75, had been an especially fruitful one in very many respects for work in the areas of covalent materials in general, and of the nitrides in particular. The Institute was therefore able to cap ture fully the spirit of excitement and adventure engendered by the outputs of numerous national research programmes, as well as those of many smaller research groups, concerning ceramics potent ially suitable for applications in a high temperature engineering context. It reflected accurately the state of knowledge with respect to the basic science, the powder technology, and the prop erties of materials based on silicon nitride and associated syst ems. The Proceedings of the Institute thus provided a good record for workers already in the field, and a useful textbook for new comers to the subject of nitrogen ceramics. The Canterbury Advanced Study Institute had a valuable educ ational and social function in bringing together for two weeks a large proportion of those workers most closely involved at that time with the nitrogen ceramics. The atmosphere of this meeting, providing both intensive discussions and informal contacts, made a lasting impression on the participants, and inevitably the question was raised of whether, and when, a second Advanced Study Institute might be held on this subject.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1979 with total page 1520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-07-01 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements
