Download or read book Centrifugal Pump Technology and Pump Cavitation written by Dr M a Zaher and published by CreateSpace. This book was released on 2015-01-25 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal pump technology involves a broad spectrum of flow phenomena, which have a profound impact on design and operation through the achieved efficiency, the stability of the head-capacity characteristic, component failure due to fatigue, as well as material damage caused by cavitation, hydro-abrasive wear or erosion corrosion. Operation and life cycle costs of pumping equipment depend to a large extent on how well these phenomena and the interaction of the pump with the system are understood. The book comprises thirteen chapters covering: theory of centrifugal pump impeller, design of mixed flow impellers, pump casing, hydraulic performance, leakage-disk friction and mechanical losses, water hammer, special operating conditions, and its applications. The book also describes cavitation in pumps, and how unacceptable cavitation can be avoided with the aid of an inducer or using a bleeding system. It explains cavitation problems such as hydraulic performance loss, hydro-dynamically or thermodynamically induced surging, and cavitation erosion/corrosion. The book aims to be simple as is compatible with reasonably complete treatment of the subject. The mathematics has been kept as elementary as possible and many of the standard proofs have been simplified. This book is intended for professional engineers, researchers, specialist students, plant operators and maintenance personnel, plant engineers, and consulting engineers.

Download or read book Cavitation And The Centrifugal Pump written by Edward Grist and published by CRC Press. This book was released on 1998-06-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference describes the occurrence of cavitation in a centrifugal pump, and how unacceptable cavitation can be avoided. It explains cavitation problems such as hydraulic performance loss, hydrodynamically or thermodynamically induced surging, and cavitation erosion. General guidelines for acceptable operation conditions, such as, net positive suction head (NPSH) margins and minimum flowrates, are presented along with evidence and logic for these proposed guidelines.

Download or read book Centrifugal Pumps written by Dimitris Papantonis and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structure of a hydraulic machine, as a centrifugal pump, is evolved principally to satisfy the requirements of the fluid flow. However taking into account the strong interaction between the pump and the pumping installation, the need to control the operation, the requirement to operate at best efficiency in order to save energy, the provision to improve the operation against cavitation and other more specific but very interesting and important topics, the object of a book on centrifugal pumps must cover a large field. The present book examines a number of these more specific topics, beyond the contents of a textbook, treating not only the pump's design and operation but also strategies to increase energy efficiency, the fluid flow control, the fault diagnosis.

Download or read book Know and Understand Centrifugal Pumps written by L. Bachus and published by Elsevier. This book was released on 2003-07-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pumps are commonly encountered in industry and are essential to the smooth running of many industrial complexes. Mechanical engineers entering industry often have little practical experience of pumps and their problems, and need to build up an understanding of the design, operation and appropriate use of pumps, plus how to diagnose faults and put them right. This book tackles all these aspects in a readable manner, drawing on the authors' long experience of lecturing and writing on centrifugal pumps for industrial audiences.

Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.

Download or read book Centrifugal Pumps written by H.H. Anderson and published by Elsevier. This book was released on 2014-06-28 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Pumps describes the whole range of the centrifugal pump (mixed flow and axial flow pumps are dealt with more briefly), with emphasis on the development of the boiler feed pump. Organized into 46 chapters, this book discusses the general hydrodynamic principles, performance, dimensions, type number, flow, and efficiency of centrifugal pumps. This text also explains the pumps performance; entry conditions and cavitation; speed and dimensions for a given duty; and losses. Some chapters further describe centrifugal pump mechanical design, installation, monitoring, and maintenance. The various types and applications of pumps in the light of the particular design features involved are addressed in other chapters. This book is authoritative, informative, and thought-provoking to an exceptional extent. It establishes a notable advance in the progress of the art of the designer and manufacturer of centrifugal pumps, to the material advantage of the user.

Download or read book Centrifugal Pump Handbook written by Sulzer Pumps and published by Butterworth-Heinemann. This book was released on 2010-09-23 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-awaited new edition is the complete reference for engineers and designers working on pump design and development or using centrifugal pumps in the field. This authoritative guide has been developed with access to the technical expertise of the leading centrifugal pump developer, Sulzer Pumps. In addition to providing the most comprehensive centrifugal pump theory and design reference with detailed material on cavitation, erosion, selection of materials, rotor vibration behavior and forces acting on pumps, the handbook also covers key pumping applications topics and operational issues, including operating performance in various types of circuitry, drives and acceptance testing. Enables readers to understand, specify and utilise centrifugal pumps more effectively, drawing on the industry-leading experience of Sulzer Pumps, one of the world's major centrifugal pump developers Covers theory, design and operation, with an emphasis on providing first class quality and efficiency solutions for high capital outlay pump plant users Updated to cover the latest design and technology developments, including applications, test and reliability procedures, cavitation, erosion, selection of materials, rotor vibration behaviour and operating performance in various types of circuitry

Download or read book Centrifugal Pumps written by Val S. Lobanoff and published by Elsevier. This book was released on 2013-10-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.

Download or read book Centrifugal Pump Clinic Second Edition Revised and Expanded written by Igor J. Karassik and published by CRC Press. This book was released on 1989-05-25 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining the excellent coverage of centrifugal pumps begun in the First Edition -- called ``useful'' and ``indispensable'' by reviewers -- the Second Edition continues to serve as the most complete and up-to-date working guide yet written for plant and design engineers involved with centrifugal pumps.

Download or read book Net Positive Suction Head for Rotodynamic Pumps A Reference Guide written by European Association for Pump Manufacturers and published by Elsevier. This book was released on 1999-05-27 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation, the result of insufficient pressure in a pump inlet, is not only the major cause of loss in pump performance, but also of reduced cost effectiveness. This practical guide provides straight forward, up to the minute advice on all aspects of cavitation and NPSH, enabling the end user to improve all the factors involved. Prepared by Europump - European Association of Pump Manufacturers - this book contains the results of years of research work and practical experience by leading European educational institutions and pump manufacturers to give a valuable unbiased guide which is applicable to all types of rotodynamic pumps and related systems.

Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer Nature. This book was released on 2019-11-22 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook summarizes the research results on hydraulic problems in centrifugal pump design and describes the state of the art in a comprehensive way. For this 4th edition, current research results of practical relevance were included. The selection and presentation of the material was oriented towards the needs of pump manufacturers, system planners and pump operators. Much space is devoted to understanding the physical relationships as essential knowledge for correct application. The latter is supported by more than 160 diagrams and tables for calculation and problem diagnosis . The book has been extensively updated. New additions: - A separate chapter on "Vibrations on vertical pumps". - Measurements of hydraulic exciter and impeller reaction forces - Alternating stresses and fatigue fractures of impellers - a critical study on the accuracy of numerical flow calculations of pumps - Design of inlet housings and double spirals for multistage pumps.

Download or read book Centrifugal Pumps written by Igor J. Karassik and published by . This book was released on 1960 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer. This book was released on 2014-10-24 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The discussions of vibrations, noise, unsteady flow phenomena, stability, hydraulic excitation forces and cavitation have been significantly enhanced. To ease the use of the information, the methods and procedures for the various calculations and failure diagnostics discussed in the text are gathered in about 150 pages of tables which may be considered as almost unique in the open literature. The text focuses on practical application in the industry and is free of mathematical or theoretical ballast. In order to find viable solutions in practice, the physical mechanisms involved should be thoroughly understood. The book is focused on fostering this understanding which will benefit the pump engineer in industry as well as academia and students.

Download or read book Centrifugal Pumps written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2004-12-27 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Syposium on Centrifugal Pumps – The State of the Art and New Developments is the latest in a successful and prestigious series of IMechE Event Publications. Experts in the field of pumps and pumping have come together to produce these unique papers which cover reducing costs by using less components and better seals, bearings and couplings, increasing and maintaining pump efficiency using high speed super-synchronous motors; and improving safety. Complete Contents: Closed valve flow field investigation using computational fluid dynamics A new class of seal-less pump with synchronous integrated canned magnetic drive Development of a new generation of customer focused water pumps Improving pump reliability through its secondary components Variable medium speed pumps combine superior performance with reduced life cycle cost (LCC) The Weir VSR 2100 - A new concept in high-pressure pumping High-speed pumps using integrated motor technology Derby transfer pumping station - inception to commissioning State-of-the-art boiler feed pump upgrade for Ratcliffe Power Station Centrifugal Pumps will be invaluable reading to those involved with pumps and pumping, including makers and users, component suppliers, refurbishers, contractors, consultants, and researchers.

Download or read book Practical Introduction to Pumping Technology written by Uno Wahren and published by Gulf Professional Publishing. This book was released on 1997-12-12 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Front Cover; Practical Introduction to Pumping Technology; Copyright Page; Chapter 1. Parameters; Chapter 2. Pump Calculations; Chapter 3. Required Data for Specifying Pumps; Chapter 4. Pump Types; Chapter 5. Specifications; Chapter 6. Pump Curves; Chapter 7. Effects of Viscosity on Pump Performance; Chapter 8. Vibration; Chapter 9. Net Positive Suction Head (NPSH); Chapter 10. Pump Shaft Sealing; Chapter 11. Pump Bearings; Chapter 12. Metallurgy; Chapter 13. Pump Drivers; Chapter 14. Gears; Chapter 15. Couplings; Chapter 16. Pump Controls; Chapter 17. Instrumentation.

Download or read book Power Plant Centrifugal Pumps written by Maurice L. Adams and published by CRC Press. This book was released on 2017-03-16 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the critical work of maintaining power plant machinery, operating difficulties with centrifugal pumps will inevitably occur because of the essential requirement for electric power plants to operate at all times throughout the year. The root causes and solutions for pump failure comprise major areas of study for engineers in seeking the highest availability of electricity-generating units, extending time between major machinery overhauls and providing early detection of potential failure modes well in advance of machine degradation. This guide for engineers provides a comprehensive overview of the fundamentals of centrifugal pumps, addressing the range of pump operating problems encountered in both fossil and nuclear power plants. The book is divided into three sequential parts: Part I - Primer on Centrifugal Pumps, Part II -Power Plant Centrifugal Pump Applications, and Part III - Trouble-Shooting Case Studies. Employing effective research models developed through years of experience, the author draws on an extensive range of scholarship that covers the detrimental impact of power plant pump failures on overall plant performance, as well as the preventative measures that aid in successful pump maintenance. After covering the performance and components of centrifugal pumps, operating failure modes are covered both for fossil and nuclear power plants. This is followed by the presentation of several power plant pump troubleshooting case studies. The text also walks readers through the various other industrial applications of centrifugal pumps, as in their use within petrochemical plants and in ocean vessel propulsion systems. Recognizing the warning signs of specific impending pump failure modes is essential to minimizing the financial costs of dealing with pump operating problems. To this end, the author lays out a range of theoretical models and relevant examples in support of the essential work of power plant pump use and maintenance:

Download or read book Operator S Guide to Centrifugal Pumps written by Robert X. Perez and published by Xlibris Corporation. This book was released on 2008-09-22 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: We work in an industry where economic success is heavily dependent on the collective performance of our processing equipment and their operators. Without highly trained and confident operators we can never hope to realize the full potential of our complex processes. Formal and informal training must be provided regularly if continuous process and reliability gains are to be expected. There are no shortcuts to operational excellence. One training topic essential to every operators education is that of centrifugal pumping technology. The ever-present centrifugal pump is one of the workhorses of the process world, tirelessly moving fluids, ranging from the innocuous to the toxic and flammable, from one stage of the process to the next. We would be hard pressed to find a processing unit inside our complexes without a few of these in service. Their shear numbers and variety can make their mastery a challenge. This book was specifically written for process operators who regularly deal with centrifugal pumps, addressing principally those variables and factors under their control, while limiting design theory and mathematics to a minimum. The following topics and content are covered: 1. Importance of equipment reliability and what role operators play in this mission. 2. Centrifugal pump operating characteristics 3. Mechanical seals and their related seal flush plans 4. What operators should know about electric motors 5. Lubrication basics 6. Troubleshooting basics 7. How to start a pump reliability program By the end of the book, the reader should possess a clear understanding of how to operate and monitor their pumps. Three handy references are also contained in the book to answer questions as they arise in the field: 1) Operators Guide to API Flush Plans, 2) Illustrated Glossary of Centrifugal Pump Terms, 3) Glossary of Electric Motor Terms, and 4) Useful Centrifugal Pump Formulas. This book can be used as a self-paced, self-taught short course or as a companion to a live prepared short course for both inexperienced and seasoned operators. It can also serve as a handy field guide after completion of the course. The ultimate mission of this book is to provide the latest generation of operators a body of knowledge that is relevant, complete, and practical in an industrial setting for years to come.