Download or read book Catalysis and its industrial applications written by Edgar Jobling and published by . This book was released on 1916 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Catalytic Processes for Fine and Specialty Chemicals written by Sunil S Joshi and published by Elsevier. This book was released on 2016-04-12 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Catalytic Processes for Fine and Specialty Chemicals provides a comprehensive methodology and state-of-the art toolbox for industrial catalysis. The book begins by introducing the reader to the interesting, challenging, and important field of catalysis and catalytic processes. The fundamentals of catalysis and catalytic processes are fully covered before delving into the important industrial applications of catalysis and catalytic processes, with an emphasis on green and sustainable technologies. Several case studies illustrate new and sustainable ways of designing catalysts and catalytic processes. The intended audience of the book includes researchers in academia and industry, as well as chemical engineers, process development chemists, and technologists working in chemical industries and industrial research laboratories. Discusses the fundamentals of catalytic processes, catalyst preparation and characterization, and reaction engineering Outlines the homogeneous catalytic processes as they apply to specialty chemicals Introduces industrial catalysis and catalytic processes for fine chemicals Includes a number of case studies to demonstrate the various processes and methods for designing green catalysts
Download or read book Industrial Applications of Homogeneous Catalysis written by A. Mortreux and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysts are now widely used in both laboratory and industrial-scale chemistry. Indeed, it is hard to find any complex synthesis or industrial process that does not, at some stage, utilize a catalytic reaction. The development of homogeneous transition metal catalysts on the laboratory scale has demonstrated that these systems can be far superior to the equivalent heterogeneous systems, at least in terms of selectivity. is an increasing interest in this field of research from both an Thus, there academic and industrial point of view. In connection with the rapid developments in this area, four universities from the E.E.C (Aachen, FRG; Liege, Belgium; Milan, Italy; and Lille, France) have collaborated to organise a series of seminars for high-level students and researchers. These meetings have been sponsored by the Commission of the E.E.C and state organizations. The most recent of these meetings was held in Lille in September 1985 and this book contains updated and expanded presentations of most of the lectures given there. These lectures are concerned with the field of homogeneous transition metal catalysis and its application to the synthesis of organic intermediates and fine chemicals from an academic and industrial viewpoint. The continuing petroleum crisis which began in the early 1970s has given rise to the need to develop new feedstocks for the chemical industry.
Download or read book Homogeneous Catalysis written by Sumit Bhaduri and published by John Wiley & Sons. This book was released on 2014-09-08 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, the area of homogeneous catalysis with transition metal has grown in great scientific interest and technological promise, with research in this area earning three Nobel Prizes and filing thousands of patents relating to metallocene and non-metallocene single site catalysts, asymmetric catalysis, carbon-carbon bond forming metathesis and cross coupling reactions. This text explains these new developments in a unified, cogent, and comprehensible manner while also detailing earlier discoveries and the fundamentals of homogeneous catalysis. Serving as a self-study guide for students and all chemists seeking to gain entry into this field, it can also be used by experienced researchers from both academia and industry for referring to leading state of the art review articles and patents, and also as a quick self-study manual in an area that is outside their immediate expertise. The book features: • Topics including renewable feed stocks (biofuel, glycerol), carbon dioxide based processes (polycarbonates), fluorous solvents, ionic liquid, hydroformylation, polymerization, oxidation, asymmetric catalysis, and more • Basic principles of organometallic chemistry, homogeneous catalysis, and relevant technological issues • Problems and answers, industrial applications (case studies), and examples from proven industrial processes with clear discussions on environmental and techno-commercial issues • Extensive references to cutting edge research with application potential and leading patents • Tables and illustrations to help explain difficult concepts
Download or read book Catalysis and Its Industrial Applications written by Edgar Jobling and published by . This book was released on 1916 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis and Its Industrial Applications written by E. Jobling and published by . This book was released on 1916 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Catalysis written by Mark Anthony Benvenuto and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-08-23 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Catalysis provides an excellent introduction to catalytic principles and processes, addressing the applications of inorganic-, organic- and biocatalysts in industrial chemistry. Each chapter is focussed on one catalytic process and discusses its life cycle from source materials, catalyst synthesis, the catalytic process, lifetime and recovery. The book also includes a comprehensive overview on industrial processes employing catalysis.
Download or read book Industrial Catalysis written by Jens Hagen and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in it's 3rd Edition, Industrial Catalysis offers all relevant information on catalytic processes in industry, including many recent examples. Perfectly suited for self-study, it is the ideal companion for scientists who want to get into the field or refresh existing knowledge. The updated edition covers the full range of industrial aspects, from catalyst development and testing to process examples and catalyst recycling. The book is characterized by its practical relevance, expressed by a selection of over 40 examples of catalytic processes in industry. In addition, new chapters on catalytic processes with renewable materials and polymerization catalysis have been included. Existing chapters have been carefully revised and supported by new subchapters, for example, on metathesis reactions, refinery processes, petrochemistry and new reactor concepts. "I found the book accesible, readable and interesting - both as a refresher and as an introduction to new topics - and a convenient first reference on current industrial catalytic practise and processes." Excerpt from a book review for the second edition by P. C. H. Mitchell, Applied Organometallic Chemistry (2007)
Download or read book Industrial Catalysis written by Ruud I. Wijngaarden and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for developers of catalysts, and for practitioners working in the field of design, operation, and optimization of chemical reactors in which heterogeneous catalysis is performed. It is designed to give a better understanding of the phenomena which can influence catalyst performance. Since two disciplines, chemistry and chemical engineering, meet in catalyst research and development, this book covers the chemical point of view for engineers, and the engineering point of view for chemists. It starts with an introduction explaining selectivity, activity and effectiveness providing the fundamentals for the newcomer. Catalyst preparation and catalyst testing are also described. A method is introduced that can be used to calculate the effectiveness of catalyst pellets as a function of shape, size, pore size, type of kinetics and diffusion, and temperature and pressure conditions. Optimization of catalysts and troubleshooting are also covered. This is a book without any rilvals because of its practical relevance.
Download or read book Shape Selective Catalysis in Industrial Applications written by N. Y. Chen and published by . This book was released on 1989 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to current and potential industrial applications of shape selective zeolite catalysis. A manual for workers in the field--and a bridge of technology transfer among various industries--this reference explains the fundamentals of zeolite catalysis, and describes the relation between catalyst structure and catalytic activity, and methods of achieving molecular shape selectivity. Includes chemical reactions using shape selective catalysts, and industrial processes using shape selective zeolites. Potential applications of the technology are in areas such as oil production, shale oil, coal, natural gas, internal combustion engine modification, biomass conversion, and the fermentation, chemical, and waste recovery industries. Annotation(c) 2003 Book News, Inc., Portland, OR (booknews.com)
Download or read book Catalysis and Its Industrial Applications written by Edgar Jobling and published by Theclassics.Us. This book was released on 2013-09 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1920 edition. Excerpt: ... CHAPTER VI. Hydrogenation. I. The reduction of organic compounds by the old stock methods was always a tedious process. It is possible, however, to effect reduction in a simple straightforward manner by a method known as hydrogenation, i.e., by direct treatment with hydrogen of the substance to be reduced. The inception of this method is to be attributed to the researches of Sabatier and his collaborators, beginning in 1897, upon the capacity of certain metals when in the finely-divided state for inducing a remarkable "activation" of hydrogen. By the aid of a metallic catalyst of this sort, they found that the union of unsaturated compounds with gaseous hydrogen or the direct replacement of an element in a saturated compound with hydrogen could readily be effected in a manner which permits of great regulation and adaptation. The method has been employed by Sabatier and his co-workers, Senderens, Mailhe, and others, for the preparation of a whole host of substances hitherto either unknown or else very difficult to obtain by other means; and in several instances the laboratory process has been promoted to the industrial stage with conspicuous success. In Sabatier's method the substance to be hydrogenated is invariably treated when in the vaporous state; but other methods--associated with the names of Paal, Skita, Willstatter, and Ipatiew--have since been introduced in which the same principle is applied to the treatment of liquid material. In the following pages, each of these methods will be considered. (i) Catalytic Hydrogenation In Hie Vapour State. 2. The principle of Sabatier's method1 is a simple one. The vapour of the substance to be reduced is mixed with hydrogen and passed over specific metallic catalysts maintained at...
Download or read book Catalysis and Its Industrial Applications Classic Reprint written by E. Jobling and published by Forgotten Books. This book was released on 2017-12-14 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Catalysis and Its Industrial Applications Nearly twenty years ago, Ostwald 2 predicted that the great advances of chemical industry would be made by means of the more extensive employ ment of catalytic agencies. It is left for the reader to judge whether this prophecy has been fulfilled. Moreover, the attention which the subject is receiving nowadays at the hands of industrial chemists justifies the hope of still more valuable application in the future2 catalysis and its applications. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Catalysis written by J.A. Moulijn and published by Elsevier. This book was released on 1993-09-09 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis is a multidisciplinary activity which is reflected in this book. The editors have chosen a novel combination of basic disciplines - homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis with metallic and non-metallic solids. The main theme of the book is the molecular approach to industrial catalysis. In the introductory section Chapter 1 presents a brief survey of the history of industrial heterogeneous and homogeneous catalysis. Subsequently, a selection of current industrial catalytic processes is described (Chapter 2). A broad spectrum of important catalytic applications is presented, including the basic chemistry, some engineering aspects, feedstock sources and product utilisation. In Chapter 3, kinetic principles are treated. The section on fundamental catalysis begins with a description of the bonding in complexes and to surfaces (Chapter 4). The elementary steps on complexes and surfaces are described. The chapter on heterogeneous catalysis (5) deals with the mechanistic aspects of three groups of important reactions: syn-gas conversion, hydrogenation, and oxidation. The main principles of metal and metal oxide catalysis are presented. Likewise, the chapter on homogeneous catalysis (6) concentrates on three reactions representing examples from three areas: carbonylation, polymerization, and asymmetric catalysis. Identification by in situ techniques has been included. Many constraints to the industrial use of a catalyst have a macroscopic origin. In applied catalysis it is shown how catalytic reaction engineering deals with such macroscopic considerations in heterogeneous as well as homogeneous catalysis (Chapter 7). The transport and kinetic phenomena in both model reactors and industrial reactors are outlined. The section on catalyst preparation (Chapters 8 and 9) is concerned with the preparation of catalyst supports, zeolites, and supported catalysts, with an emphasis on general principles and mechanistic aspects. For the supported catalysts the relation between the preparative method and the surface chemistry of the support is highlighted. The molecular approach is maintained throughout. The first chapter (10) in the section on catalyst characterization summarizes the most common spectroscopic techniques used for the characterisation of heterogeneous catalysts such as XPS, Auger, EXAFS, etc. Temperature programmed techniques, which have found widespread application in heterogeneous catalysis both in catalyst characterization and simulation of pretreatment procedures, are discussed in Chapter 11. A discussion of texture measurement, theory and application, concludes this section (12). The final chapter (13) gives an outline of current trends in catalysis. Two points of view are adopted: the first one focusses on developments in process engineering. Most often these have their origin in demands by society for better processes. The second point of view draws attention to the autonomous developments in catalysis, which is becoming one of the frontier sciences of physics and chemistry. In this book emphasis is on those reactions catalyzed by heterogeneous and homogeneous catalysts of industrial relevance. The integrative treatment of the subject matter involves many disciplines, consequently, the writing of the book has been a multi-author task. The editors have carefully planned and harmonized the contents of the chapters.
Download or read book Heterogeneous Catalysis and its Industrial Applications written by Martin Schmal and published by Springer. This book was released on 2016-09-22 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to introduce the basic concepts involved in industrial catalytic processes. It is profusely illustrated with experimental results with the main objective of guiding how to select a suitable catalyst for specific processes. The book is divided in two parts. In the first part the basic concepts are addressed, regarding the existing theories, activity patterns and adsorption-desorption phenomena. In the second part the key experimental methods for the physicochemical characterization of catalysts are presented, as well as the currently used catalyst pre and post treatments. The last chapter describes some important in situ characterization techniques (e.g. XPS and TEM) and surface model patterns related to surface modifications occurring during the reaction. Thoroughly illustrated with microscopy images, spectroscopy data and schematics of reaction mechanisms, the book provides a powerful learning tool for students in undergraduate and graduate level courses on the field of catalysis. Exercises and resolved problems are provided, as well as experimental procedures to support laboratory classes. Furthermore, the content is presented in a carefully chosen sequence, reflecting the 30 year teaching experience of the author. The author, Professor Martin Schmal, sees the present book as a way of conveying basic knowledge needed for the development of more efficient catalysts (i.e. nanostructured materials) and novel industrial chemical processes in the fields of environmental chemistry, fine chemistry, hydrotreating of heavy oils, hydrogen production and biomass processing.
Download or read book Catalysis written by Gadi Rothenberg and published by John Wiley & Sons. This book was released on 2017-09-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory textbook covers all aspects of catalysis. It also bridges computational methods, industrial applications and green chemistry, with over 600 references. The book is aimed at chemistry and chemical engineering students, and is suitable for both senior undergraduate- and graduate-level courses, with many examples and hands-on exercises. The author, a renowned researcher in catalysis, is well known for his clear teaching and writing style (he was voted "lecturer of the year" by the chemistry students). Following an introduction to green chemistry and the basics of catalysis, the book covers the principles and applications of homogeneous catalysis, heterogeneous catalysis and biocatalysis. Each chapter includes up-to-date industrial examples, that demonstrate how catalysis helps our society reach the goals of sustainable development. Since its publication in 2008, Catalysis: Concepts and Green Applications has become the most popular textbook in catalysis. This second edition is updated with the latest developments in catalysis research in academia and industry. It also contains 50 additional exercises, based on the suggestions of students and teachers of chemistry and chemical engineering from all over the world. The book is also available in the Chinese language (https://detail.tmall.com/item.htm?spm=a212k0.12153887.0.0.4e60687dUTEDKm&id=619581126247). Additional teaching material (original figures as PowerPoint lecture slides) is freely available in the Supplementary Material.
Download or read book Handbook of Industrial Catalysts written by Lawrie Lloyd and published by Springer Science & Business Media. This book was released on 2011-07-26 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has been written about fundamental aspects of catalysis, yet despite their universal applications details concerning commercial catalysts and information about actual operating conditions are not readily available. This book provides up-to-date reviews and references to guide those working on industrial catalysts. It will be an invaluable guide for catalysis researchers in industry and academia, and for students.
Download or read book Liquid Phase Aerobic Oxidation Catalysis written by Shannon S. Stahl and published by John Wiley & Sons. This book was released on 2016-10-10 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to place recent academic developments within the context of real life industrial applications, this is a timely overview of the field of aerobic oxidation reactions in the liquid phase that also illuminates the key challenges that lie ahead. As such, it covers both homogeneous as well as heterogeneous chemocatalysis and biocatalysis, along with examples taken from various industries: bulk chemicals and monomers, specialty chemicals, flavors and fragrances, vitamins, and pharmaceuticals. One chapter is devoted to reactor concepts and engineering aspects of these methods, while another deals with the relevance of aerobic oxidation catalysis for the conversion of renewable feedstock. With chapters written by a team of academic and industrial researchers, this is a valuable reference for synthetic and catalytic chemists at universities as well as those working in the pharmaceutical and fine chemical industries seeking a better understanding of these reactions and how to design large scale processes based on this technology.
