Download or read book Cadmium Oxide Thin Films Growth and Optical Characterization written by Surita Annual and published by . This book was released on 2012 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Sputtered Cadmium Oxide Thin Films for Gas Sensing Application written by Anil Kumar Gadipelly and published by LAP Lambert Academic Publishing. This book was released on 2015-02-04 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we have discussed the preparation and characterization of CdO thin films using RF reactive magnetron sputtering technique. The deposition parameters such as oxygen partial pressure, substrate temperature and film thickness are optimized for producing good quality films. Systematic characterization of as deposited and annealed films has been discussed from the crystal structure, surface morphology, film composition, optical and electrical properties. The films prepared under optimized conditions are tested for gas sensing characteristics towards ammonia gas.
Download or read book Metal organic Chemical Vapor Deposition of Cadmium Oxide based Transparent Conductors written by Andrew William Metz and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials with high electrical conductivity and optical transparency are needed for future flat panel display, solar energy, and other opto-electronic technologies. High quality Cd1-xInxO films with been deposited utilizing our new class of MOCVD precursors. The x = 0.05 film, with conductivity of 17,000 S/cm, carrier mobility of 70 cm2/V·s, and wide visible region optical transparency window considerably exceed the corresponding parameters for commercial indium-tin oxide (ITO).
Download or read book Some optical properties of thin films of the sulphides of zinc cadmium and mercury written by William Robert Oliver and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Perspectives in Pyrolysis Research written by Mattia Bartoli and published by BoD – Books on Demand. This book was released on 2022-04-13 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Perspectives in Pyrolysis Research presents and discusses different routes of pyrolytic conversions. It contains exhaustive and comprehensive reports and studies of the use of pyrolysis for energy and materials production and waste management.
Download or read book Luminescent Metal Oxides written by S.V. Moharil and published by CRC Press. This book was released on 2023-11-16 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the book is to explore metal oxides exhibiting a high optical transmittance as applicable in the field of light-emitting diodes (LEDs), photo-catalysts, and so forth. It provides exposure to structural and chemical parameters of optically active metal oxides as a phosphor, innovative and currently demanded synthesis methods, and their proper characterization. It further covers applications such as optical thermometry, scintillation, anti-counterfeit, solid-state lighting and spectral modifier for solar cells, VUV application, and long persistent light emission phenomenon. Features: Reviews selection of structurally and functionally active materials for effective synthesis of metal oxides Exclusively covers large number of areas of applications of the luminescent metal oxides Cover various aspects of metal oxide research including synthesis and applications Includes chapters on synthesis-related predictions using machine learning Discusses radiation dosimetry and bio-imaging aspects This book is aimed at researchers and graduate students in materials science and phosphor technology.
Download or read book Electrode Materials for Energy Storage and Conversion written by Mesfin A. Kebede and published by CRC Press. This book was released on 2021-11-17 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest developments and materials used in electrochemical energy storage and conversion devices, including lithium-ion batteries, sodium-ion batteries, zinc-ion batteries, supercapacitors and conversion materials for solar and fuel cells. Chapters introduce the technologies behind each material, in addition to the fundamental principles of the devices, and their wider impact and contribution to the field. This book will be an ideal reference for researchers and individuals working in industries based on energy storage and conversion technologies across physics, chemistry and engineering. FEATURES Edited by established authorities, with chapter contributions from subject-area specialists Provides a comprehensive review of the field Up to date with the latest developments and research Editors Dr. Mesfin A. Kebede obtained his PhD in Metallurgical Engineering from Inha University, South Korea. He is now a principal research scientist at Energy Centre of Council for Scientific and Industrial Research (CSIR), South Africa. He was previously an assistant professor in the Department of Applied Physics and Materials Science at Hawassa University, Ethiopia. His extensive research experience covers the use of electrode materials for energy storage and energy conversion. Prof. Fabian I. Ezema is a professor at the University of Nigeria, Nsukka. He obtained his PhD in Physics and Astronomy from University of Nigeria, Nsukka. His research focuses on several areas of materials science with an emphasis on energy applications, specifically electrode materials for energy conversion and storage.
Download or read book Cadmium based II VI Semiconducting Nanomaterials written by Abdul Majid and published by Springer. This book was released on 2017-11-10 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides technological perspective and comprehensive overview on the research efforts related to II-VI group cadmium based semiconducting nanomaterials. It describes state-of-the-art information on different synthesis methods for preparation of these materials using a variety of experimental strategies. The effects of synthesis roots on structural, thermal, mechanical, lattice vibronic, electronic, optical and carrier transport characteristics of these nano-structures are systematically analyzed. A wide target readership comprising of students, researchers, scholars, scientists, technicians, academicians, industrialists can benefit from this book, as cadmium based semiconductors possess significant research and industrial interest thanks to their innovative properties.
Download or read book Semiconductors written by Rosalinda Inguanta and published by BoD – Books on Demand. This book was released on 2018-03-07 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconducting materials are widely used in several applications such as photonics, photovoltaics, electronics, and thermoelectrics, because of their optical and electro-optical features. The fundamental and technological importance of these materials is due to the unique physical and chemical properties. Over the years, numerous methods have been developed for the synthesis of high-efficient semiconductors. Moreover, a variety of approach and characterization methods have been used to study the numerous and fascinating properties of the semiconducting materials. This book collects new developments about semiconductors, from the fundamental issues to their synthesis and applications. Special attention has been devoted to electrochemical growth and characterization.
Download or read book Preparation and Post Annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films written by Rongxin Wang and published by Open Dissertation Press. This book was released on 2017-01-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "Preparation and Post-annealing Effects on the Optical Properties of Indium Tin Oxide Thin Films" by Rongxin, Wang, 王榮新, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Abstract of thesis entitled PREPARATION AND POST-ANNEALING EFFECTS ON THE OPTICAL PROPERTIES OF INDIUM TIN OXIDE THIN FILMS Submitted by WANG Rong Xin for the degree of Doctor of Philosophy at The University of Hong Kong in April 2005 Many opto-electronic devices, such as III-V compound devices, liquid crystal displays, solar cells, organic and inorganic light emitting devices, and ultraviolet photodetectors, demand transparent electrode materials simultaneously having high electrical conductance. To meet the requirements for particular applications, a great deal of basic research and studies have been carried out on the electrical and optical properties of these materials. As a most promising candidate for such materials, indium tin oxide (ITO) has attracted interest in recent years. Furthermore, ITO has many unique properties such as excellent adhesion on the substrate, thermal stability and ease of patterning. The deposition of high-quality ITO thin films is a key step for successful application of ITO thin films as transparent electrode materials. To obtain optimal electrical and optical properties of ITO films, the growth parameters and conditions must be determined. Moreover, the optical and electrical properties of ITO contact layers, which can either be on the top side or the bottom side of a device, are influenced by various post-deposition treatments. For the present work, ITO thin films were deposited on glass and quartz substrates using e-beam evaporation with different deposition rates. The influence of substrate material, deposition rate, deposition gas environment and post-deposition annealing on the optical properties of the films was investigated in detail. Atomic force microscopy, X-ray diffraction and X-ray photoemission spectroscopy was employed to obtain information on the chemical state and crystallization of the films. Analysis of these data suggests that the substrate material, deposition rate, deposition gas environment and post-deposition annealing conditions strongly affect the chemical composition and the microstructure of the ITO films and these in turn influence the optical properties of the film. Oxygen incorporation transfers the In O phase to the In O phase and removes metallic In to form both indium oxide 2 3-x 2 3 phases. Both of these reactions are beneficial for the optical transmittance of ITO thin films. Moreover, it was found that the incorporation and decomposition reactions of oxygen can be controlled so as to change the optical properties of the ITO thin films reversibly. DOI: 10.5353/th_b3154617 Subjects: Thin films - Optical properties Indium compounds Annealing of metals
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growth and Characterization of Cobalt Doped Indium Oxide Thin Films written by Naveen Kumar Mamidi and published by . This book was released on 2007 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Characterization of Very Thin Films written by Mohammad Reza Behfrooz and published by . This book was released on 1973 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Films and Heterostructures for Oxide Electronics written by Satishchandra B. Ogale and published by Springer Science & Business Media. This book was released on 2005-11-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxides form a broad subject area of research and technology development which encompasses different disciplines such as materials science, solid state chemistry, physics etc. The aim of this book is to demonstrate the interplay of these fields and to provide an introduction to the techniques and methodologies involving film growth, characterization and device processing. The literature in this field is thus fairly scattered in different research journals covering one or the other aspect of the specific activity. This situation calls for a book that will consolidate this information and thus enable a beginner as well as an expert to get an overall perspective of the field, its foundations, and its projected progress.
Download or read book Nanostructured Metal Oxides and Devices written by M. K. Jayaraj and published by Springer Nature. This book was released on 2020-04-16 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily covers the fundamental science, synthesis, characterization, optoelectronic properties, and applications of metal oxide nanomaterials. It discusses the basic aspects of synthetic procedures and fabrication technologies, explains the related experimental techniques and also elaborates on the current status of nanostructured oxide materials and related devices. Two major aspects of metal oxide nanostructures – their optical and electrical properties – are described in detail. The first five chapters focus on the optical characteristics of semiconducting materials, especially metal oxides at the nanoscale. The following five chapters discuss the electrical properties observed in metal oxide-based semiconductors and the status quo of device-level developments in a variety of applications such as sensors, transistors, dilute magnetic semiconductors, and dielectric materials. The basic science and mechanism behind the optoelectronic phenomena are explained in detail, to aid readers interested in the structure–property symbiosis in semiconducting nanomaterials. In short, the book offers a valuable reference guide for researchers and academics in the areas of material science and semiconductor technology, especially nanophotonics and electronics.
Download or read book Influence of PH of Spray Solution on Optoelectronic Properties of Cadmium Oxide Thin Films written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
