Download or read book Building a Velocity Model for Prestack Depth Migration in a Complex Area written by Freddy Jose Obregon and published by . This book was released on 2001 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prestack Depth Migration and Velocity Model Building written by Ian Frederick Jones and published by SEG Books. This book was released on 2008 with total page 1427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compilation of material published 1983-2004.
Download or read book Model based Depth Imaging written by Stuart Fagin and published by SEG Books. This book was released on 1998 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an informal review of the principle techniques and issues associated with prestack depth imaging. The intended audience for this book would be those seismic interpreters, processors, managers, and explorationists who require basic familiarity with the technology that has so greatly expanded the range of geologic structures that can be successfully imaged. The emphasis of the book is on velocity-model building techniques that are the key to successful depth imaging.
Download or read book A Practical Understanding of Pre and Poststack Migrations Prestack written by John C. Bancroft and published by SEG Books. This book was released on 2007 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is designed to give the practicing geophysicist an understanding of the principles of prestack migration, presented with intuitive reasoning that avoids difficult math. Modeling with common-shot record and a constant-offset section are used to introduce prestack migration. New material in this revised edition of the original 1998 book includes algorithms that lead to and include Claerbout's inversion method.
Download or read book Computational Science and Its Applications ICCSA 2021 written by Osvaldo Gervasi and published by Springer Nature. This book was released on 2021-09-10 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ten-volume set LNCS 12949 – 12958 constitutes the proceedings of the 21st International Conference on Computational Science and Its Applications, ICCSA 2021, which was held in Cagliari, Italy, during September 13 – 16, 2021. The event was organized in a hybrid mode due to the Covid-19 pandemic. The 466 full and 18 short papers presented in these proceedings were carefully reviewed and selected from 1588 submissions. The books cover such topics as multicore architectures, mobile and wireless security, sensor networks, open source software, collaborative and social computing systems and tools, cryptography, human computer interaction, software design engineering, and others. Part II of the set follows two general tracks: geometric modeling, graphics and visualization; advanced and emerging applications. Further sections include the proceedings of the workshops: International Workshop on Advanced Transport Tools and Methods (A2TM 2021); International Workshop on Advances in Artificial Intelligence Learning Technologies: Blended Learning, STEM, Computational Thinking and Coding (AAILT 2021); International Workshop on Advancements in Applied Machine-learning and Data Analytics (AAMDA 2021). At the end of the book there is a block of short papers. The chapter "Spatial justice models: an exploratory analysis on fair distribution of opportunities" is published open access under a CC BY license (Creative Commons Attribution 4.0 International License). /div
Download or read book A Practical Understanding of Pre and Poststack Migrations Poststack written by John C. Bancroft and published by SEG Books. This book was released on 2007 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is designed to give the practicing geophysicist an understanding of the principles of poststack migration, presented with intuitive reasoning rather than laborious math. Modeling is introduced as a natural process that starts with a geologic model and then builds seismic data. Migration is then described as the reverse process that uses seismic data to find the geologic model. Many other topics are covered relating to the quality of the migrated section, such as aliasing, rugged topography, or use of the correct velocity. Significant new material has been added in this revised edition of the original 1997 book, especially algorithms based on the phase-shift method, such as PSPI and the omegaX method.
Download or read book Expanded Abstracts with Biographies written by and published by . This book was released on 2003 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Petroleum Seismology written by Luc Ikelle and published by SEG Books. This book was released on 2005 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing theoretical and practical background, the book's first part covers fundamental physics principles to elastodynamic wave propagation. The second part discusses modern developments such as multicomponent data, multiple elimination, AVO, anisotropy, linear anelasticity, Fourier and wavelet representations, and higher-order statistics.
Download or read book Seismic Stratigraphy and Depositional Facies Models written by P.C.H. Veeken and published by Academic Press. This book was released on 2013-11-14 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2e of Seismic Stratigraphy and Depositional Facies Models summarizes basic seismic interpretation techniques and demonstrates the benefits of integrated reservoir studies for hydrocarbon exploration. Topics are presented from a practical point of view and are supported by well-illustrated case histories. The reader is taken from a basic level to more advanced study techniques. The presented modern geophysical techniques allow more accurate prediction of the changes in subsurface geology. Dynamics of sedimentary environments are discussed their relation to global controling factors, and a link is made to high-resolution sequence stratigraphy. The interest in seismic stratigraphic techniques to interpret reflection datasets is well established. The advent of sophisticated subsurface reservoir studies and 4D monitoring for optimizing the hydrocarbon production in existing fields demonstrate the importance of the 3D seismic methodology. The added value of reflection seismics to the petroleum industry has clearly been proven over the last few decades. Seismic profiles and 3D cubes form a vast and robust data source to unravel the structure of the subsurface. Larger offsets and velocity anisotropy effects give access to more details on reservoir flow properties like fracture density, porosity and permeability distribution. Elastic inversion and modeling may tell something about the change in petrophysical parameters. Seismic investigations provide a vital tool for the delineation of subtle hydrocarbon traps, and they are the basis for understanding the regional basin framework and the stratigraphic subdivision. Seismic stratigraphy combines two very different scales of observation: the seismic and well control. The systematic approach applied in seismic stratigraphy explains why many workers are using the principles to evaluate their seismic observations. Discusses the link between seismic stratigraphic principles and sequence stratigraphy Provides techniques for seismic reservoir characterization as well as well control Analyzes inversion, AVO and seismic attributes
Download or read book Practical Imaging of Complex Geological Structures Using Seismic Prestack Depth Migration written by Jinming Zhu and published by . This book was released on 1997 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Seismic Velocity Model as an Interpretation Asset written by Phil Schultz and published by SEG Books. This book was released on 1998-12-30 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: A 3D velocity model is built with a both geophysical and geologic input because of the accuracy demands of depth imaging, so it becomes an increasingly effective interpretive tool. This book addresses ways in which the interpreter should participate in development of the model and underscores its interpretive value with case study examples.
Download or read book Salt Tectonics written by Martin P. A. Jackson and published by Cambridge University Press. This book was released on 2017-02-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Salt tectonics is the study of how and why salt structures evolve and the three-dimensional forms that result. A fascinating branch of geology in itself, salt tectonics is also vitally important to the petroleum industry. Covering the entire scale from the microscopic to the continental, this textbook is an unrivalled consolidation of all topics related to salt tectonics: evaporite deposition and flow, salt structures, salt systems, and practical applications. Coverage of the principles of salt tectonics is supported by more than 600 color illustrations, including 200 seismic images captured by state-of-the-art geophysical techniques and tectonic models from the Applied Geodynamics Laboratory at the University of Texas, Austin. These combine to provide a cohesive and wide-ranging insight into this extremely visual subject. This is the definitive practical handbook for professional geologists and geophysicists in the petroleum industry, an invaluable textbook for graduate students, and a reference textbook for researchers in various geoscience fields.
Download or read book Relative Fidelity Processing of Seismic Data written by Xiwen Wang and published by John Wiley & Sons. This book was released on 2017-02-27 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of relative fidelity preservation processing methods and their applications within the oil and gas sector. Four key principles for wide-frequency relative fidelity preservation processing are illustrated throughout the text. Seismic broadband acquisition is the basis for relative fidelity preservation processing and the influence of seismic acquisition on data processing is also analyzed. The methods and principles of Kirchhoff integral migration, one-way wave equation migration and reverse time migration are also introduced and illustrated clearly. Current research of relative amplitude preservation migration algorithms is introduced, and the corresponding numerical results are also shown. RTM (reverse time migration) imaging methods based on GPU/CPU systems for complicated structures are represented. This includes GPU/CPU high performance calculations and its application to seismic exploration, two-way wave extrapolation operator and boundary conditions, imaging conditions and low frequency noise attenuation, and GPU/CPU system based RTM imaging algorithms. Migration velocity model building methods in depth domain for complicated structures are illustrated in this book. The research status and development of velocity model building are introduced. And the impacting factors are also discussed. Several different velocity model building methods are also represented and analyzed. The book also provides the reader with several case studies of field seismic data imaging in different kinds of basins to show the methods used in practice.
Download or read book Imaging and Velocity Analysis by Target oriented Wavefield Inversion written by Yaxun Tang and published by Stanford University. This book was released on 2011 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis develops a novel target-oriented inversion framework that uses wavefields as carriers of information to image both low-wavenumber component (a.k.a. background velocity) and high-wavenumber component (a.k.a. reflectivity) of the earth model in complex geological settings, such as subsalt regions. I address the problem of reflectivity imaging with target-oriented wavefield least-squares migration, and the problem of velocity estimation with target-oriented wavefield tomography. Reflectivity images of the subsurface are commonly produced by prestack depth migration. When the overburden is complex and the reflectors are unevenly or insufficiently illuminated, the migration operator alone is inadequate to provide an optimal image. I tackle the problem of distorted illumination in reflectivity imaging by wavefield least-squares migration. I formulate least-squares migration in the image domain and solve it in a target-oriented fashion. In the image-domain formulation, explicit computation of the Hessian operator (the resolution function that measures the illumination deficiency of the imaging system) is the most important and challenging step. I develop a novel method based on phase encoding to efficiently and accurately compute the target-oriented Hessian operator. The Hessian operator is then used to recover the reflectivity by iterative inverse filtering. I regularize the inversion with dip constraints, which naturally incorporate interpreted geological information into the inversion. Accurate imaging of the reflectivity also requires an accurate background velocity model. High-quality velocity model-building in complex geology requires wavefield-based velocity analysis to properly model band-limited wave phenomena. However, the high cost and lack of flexibility of target-oriented model-building prevent this method from being widely used in practice. I overcome the cost and flexibility issues of wavefield-based migration velocity analysis by developing target-oriented wavefield tomography. Target-oriented wavefield tomography is achieved by synthesizing a new data set specifically for velocity analysis. The new data set is generated based on an initial unfocused target image and by a novel application of generalized Born wavefield modeling, which correctly preserves velocity kinematics by modeling both zero and non-zero subsurface-offset-domain images. The new data set can be synthesized for a chosen target region with velocity inaccuracies. The reduced data size and computation domain, therefore, greatly improve the efficiency and flexibility of wavefield tomography, allowing fast and interpretation-driven interactive wavefield-based velocity analysis, where different geological scenarios or hypotheses can be tested in quasi-real time. The proposed target-oriented inversion framework successfully estimates subsalt velocities and recovers subsalt reflectivities from distorted illumination from 2-D synthetic and 3-D field data.
Download or read book Mathematical Methods and Modelling in Hydrocarbon Exploration and Production written by Armin Iske and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrocarbon exploration and production incorporate great technology challenges for the oil and gas industry. In order to meet the world's future demand for oil and gas, further technological advance is needed, which in turn requires research across multiple disciplines, including mathematics, geophysics, geology, petroleum engineering, signal processing, and computer science. This book addresses important aspects and fundamental concepts in hydrocarbon exploration and production. Moreover, new developments and recent advances in the relevant research areas are discussed, whereby special emphasis is placed on mathematical methods and modelling. The book reflects the multi-disciplinary character of the hydrocarbon production workflow, ranging from seismic data imaging, seismic analysis and interpretation and geological model building, to numerical reservoir simulation. Various challenges concerning the production workflow are discussed in detail. The thirteen chapters of this joint work, authored by international experts from academic and industrial institutions, include survey papers of expository character as well as original research articles. Large parts of the material presented in this book were developed between November 2000 and April 2004 through the European research and training network NetAGES, "Network for Automated Geometry Extraction from Seismic". The new methods described here are currently being implemented as software tools at Schlumberger Stavanger Research, one of the world's largest service providers to the oil industry.
Download or read book Land Seismic Case Studies for Near Surface Modeling and Subsurface Imaging written by Öz Yilmaz and published by SEG Books. This book was released on 2021-06-30 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for practicing geophysicists, “Land Seismic Case Studies for Near-Surface Modeling and Subsurface Imaging” is a comprehensive guide to understanding and interpreting seismic data. The culmination of land seismic data acquisition and processing projects conducted by the author over the last two decades, this book contains more than nearly 800 figures from worldwide case studies—conducted in both 2D and 3D. Beginning with Chapter 1 on seismic characterization of the near-surface, Chapter 2 presents near-surface modeling by traveltime and full-wave inversion, Chapter 3 presents near-surface modeling by imaging, and then Chapter 4 includes detailed case studies for near-surface modeling. Chapter 5 reviews single- and multichannel signal processing of land seismic data with the key objective of removing surface waves and guided waves that are characterized as coherent linear noise. Uncommon seismic data acquisition methods, including large-offset acquisition in thrust belts to capture the large-amplitude supercritical reflections, swath-line acquisition, and joint PP and SH- SH seismic imaging are highlighted in Chapter 6, and Chapter 7 presents image-based rms velocity estimation and discusses the problem of velocity uncertainty. The final two chapters focus exclusively on case studies: 2D in Chapter 8 and 3D in Chapter 9. An outstanding teaching tool, this book includes analysis workflows containing processing steps designed to solve specific problems. Essential for anyone involved in acquisition, processing, and inversion of seismic data, this volume will become the definitive reference for understanding how the variables in seismic acquisition are directly reflected in the data.
Download or read book Illustrated Seismic Processing written by Stephen J. Hill and published by SEG Books. This book was released on 2019 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a foundation for understanding the fascinating field of seismic processing. Written for the non-expert, this two-volume introductory text reveals the limitations and potential pitfalls of seismic data, prepares both seismic interpreters and acquisition specialists for working with seismic processing geophysicists, and much more.
