Download or read book Bogatin s Practical Guide to Transmission Line Design and Characterization for Signal Integrity Applications written by Eric Bogatin and published by Artech House. This book was released on 2020-05-31 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multimedia eBook establishes a solid foundation in the essential principles of how signals interact with transmission lines, how the physical design of interconnects affects transmission line properties, and how to interpret single-ended and differential time domain reflection (TDR) measurements to extract important figures of merits and avoid common mistakes. This book presents an intuitive understanding of transmission lines. Instructional videos are provided in every chapter that cover important aspects of the interconnect design and characterization process. This video eBook helps establish foundations for designing and characterizing the electrical properties of interconnects to explain in a simplified way how signals propagate and interact with interconnects and how the physical design of transmission structures will impact performance. Never be intimidated by impedance or differential pairs again.
Download or read book Signal Integrity Characterization Techniques written by Mike Resso and published by Intl. Engineering Consortiu. This book was released on 2009 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cogently addressing the future of signal integrity and the effect it will have on the data transmission industry as a whole, this all-inclusive guide addresses a wide array of technologies, from traditional digital data transmission to microwave measurements, and accessibly examines the gap between the two. Focusing on real world applications and providing a wide array of case studies that show how each technology can be used—from backplane design challenges to advanced error correction techniques—this guide addresses many of today’s high-speed technologies while also providing excellent insight into their future direction. With numerous valuable lessons pertaining to the signal integrity industry, this resource is the ultimate must-read guide for any specialist in the design engineering field.
Download or read book Bogatin s Practical Guide to Prototype Breadboard and PCB Design written by Eric Bogatin and published by Artech House. This book was released on 2021-09-30 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed circuit boards (PCB) are at the heart of every electronic product manufactured today. Yet, engineers rarely learn to design PCBs from a class or course. They learn it by doing, by reading app notes, watching YouTube videos and sitting by the side of an experienced engineer. This book is the foundation building book for all engineers starting out to design PCBs. It teaches good habits designing a PCB, first for connectivity, and secondly, introduces the four most important principles to reduce noise. A seven-step process is presented: developing a plan of record, creating a Bill of Materials, completing the schematic, completing the layout, completing the assembly, conducting bring up and troubleshooting and documenting the project. Each step is developed in detail. In particular, the emphasis in this book is on risk management: what can be done at each step of the process to reduce the risk of a hard-error which requires a complete re-spin, or a soft error, which requires some sort of on-the-fly repair. After connectivity is designed, it’s important to develop good habits to minimize the potential noise from ground bounce, power rail stitching noise, stack up design and reducing switching noise in signal paths. These techniques apply to all designs from 2-layer to 8-layer and more, for bandwidths below 200 MHz. The best practices for manual lead-free soldering are presented so that everyone can become a soldering expert. The best measurement practices using common lab instruments such as the DMM, the constant current/constant voltage power supply, and oscilloscopes are presented so that common artifacts are minimized. Features in the design that help you find design or assembly errors quickly and the troubleshooting techniques to find and fix problems are introduced. Applying the habits presented in this book will help every engineer design their next circuit board faster, with less chance of an unexpected problem, with the lowest noise. This textbook will also have embedded videos to visually demonstrate many of the hands-on processes introduced in this book.
Download or read book Signal Integrity written by Eric Bogatin and published by Prentice Hall Professional. This book was released on 2004 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thorough review of the fundamental principles associated with signal integrity provides engineering principles behind signal integrity effects, and applies this understanding to solving problems.
Download or read book Power Integrity Modeling and Design for Semiconductors and Systems written by Madhavan Swaminathan and published by Pearson Education. This book was released on 2007-11-19 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Comprehensive, Example-Rich Guide to Power Integrity Modeling Professionals such as signal integrity engineers, package designers, and system architects need to thoroughly understand signal and power integrity issues in order to successfully design packages and boards for high speed systems. Now, for the first time, there's a complete guide to power integrity modeling: everything you need to know, from the basics through the state of the art. Using realistic case studies and downloadable software examples, two leading experts demonstrate today's best techniques for designing and modeling interconnects to efficiently distribute power and minimize noise. The authors carefully introduce the core concepts of power distribution design, systematically present and compare leading techniques for modeling noise, and link these techniques to specific applications. Their many examples range from the simplest (using analytical equations to compute power supply noise) through complex system-level applications. The authors Introduce power delivery network components, analysis, high-frequency measurement, and modeling requirements Thoroughly explain modeling of power/ground planes, including plane behavior, lumped modeling, distributed circuit-based approaches, and much more Offer in-depth coverage of simultaneous switching noise, including modeling for return currents using time- and frequency-domain analysis Introduce several leading time-domain simulation methods, such as macromodeling, and discuss their advantages and disadvantages Present the application of the modeling methods on several advanced case studies that include high-speed servers, high-speed differential signaling, chip package analysis, materials characterization, embedded decoupling capacitors, and electromagnetic bandgap structures This book's system-level focus and practical examples will make it indispensable for every student and professional concerned with power integrity, including electrical engineers, system designers, signal integrity engineers, and materials scientists. It will also be valuable to developers building software that helps to analyze high-speed systems.
Download or read book High Speed Digital System Design written by Stephen H. Hall and published by Wiley-IEEE Press. This book was released on 2000-09-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A cutting-edge guide to the theory and practice of high-speed digital system design An understanding of high-speed interconnect phenomena is essential for digital designers who must deal with the challenges posed by the ever-increasing operating speeds of today's microprocessors. This book provides a much-needed, practical guide to the state of the art of modern digital system design, combining easily accessible explanations with immensely useful problem-solving strategies. Written by three leading Intel engineers, High-Speed Digital System Design clarifies difficult and often neglected topics involving the effects of high frequencies on digital buses and presents a variety of proven techniques and application examples. Extensive appendices, formulas, modeling techniques as well as hundreds of figures are also provided. Coverage includes: * A thorough introduction to the digital aspects of basic transmission line theory * Crosstalk and nonideal transmission line effects on signal quality and timings * The impact of packages, vias, and connectors on signal integrity * The effects of nonideal return current paths, high frequency power delivery, and simultaneous switching noise * Explanations of how driving circuit characteristics affect the quality of the digital signal * Digital timing analysis at the system level that incorporates high-speed signaling effects into timing budgets * Methodologies for designing high-speed buses and handling the very large number of variables that affect interconnect performance * Radiated emission problems and how to minimize system noise * The practical aspects of making measurements in high-speed digital systems
Download or read book S Parameters for Signal Integrity written by Peter J. Pupalaikis and published by Cambridge University Press. This book was released on 2020-02-06 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the usage of s-parameters in signal integrity applications and gain full understanding of your simulation and measurement environment with this rigorous and practical guide. Solve specific signal integrity problems including calculation of the s-parameters of a network, linear simulation of circuits, de-embedding, and virtual probing, all with expert guidance. Learn about the interconnectedness of s-parameters, frequency responses, filters, and waveforms. This invaluable resource for signal integrity engineers is supplemented with the open-source software SignalIntegrity, a Python package for scripting solutions to signal integrity problems.
Download or read book Fiber Optics Engineering written by Mohammad Azadeh and published by Springer Science & Business Media. This book was released on 2009-08-05 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the past few decades, information technologies have been evolving at a tremendous rate, causing profound changes to our world and our ways of life. In particular, fiber optics has been playing an increasingly crucial role within the telecommunication revolution. Not only most long-distance links are fiber based, but optical fibers are increasingly approaching the individual end users, providing wide bandwidth links to support all kinds of data-intensive applications such as video, voice, and data services. As an engineering discipline, fiber optics is both fascinating and challenging. Fiber optics is an area that incorporates elements from a wide range of techno- gies including optics, microelectronics, quantum electronics, semiconductors, and networking. As a result of rapid changes in almost all of these areas, fiber optics is a fast evolving field. Therefore, the need for up-to-date texts that address this growing field from an interdisciplinary perspective persists. This book presents an overview of fiber optics from a practical, engineering perspective. Therefore, in addition to topics such as lasers, detectors, and optical fibers, several topics related to electronic circuits that generate, detect, and process the optical signals are covered. In other words, this book attempts to present fiber optics not so much in terms of a field of “optics” but more from the perspective of an engineering field within “optoelectronics.
Download or read book Principles of Power Integrity for PDN Design Simplified written by Larry D. Smith and published by Prentice Hall. This book was released on 2017-04-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consistently Design PDNs That Deliver Reliable Performance at the Right Cost Too often, PDN designs work inconsistently, and techniques that work in some scenarios seem to fail inexplicably in others. This book explains why and presents realistic processes for getting PDN designs right in any new product. Drawing on 60+ years of signal and power integrity experience, Larry Smith and Eric Bogatin show how to manage noise and electrical performance, and complement intuition with analysis to balance cost, performance, risk, and schedule. Throughout, they distill the essence of complex real-world problems, quantify core principles via approximation, and apply them to specific examples. For easy usage, dozens of key concepts and observations are highlighted as tips and listed in quick, chapter-ending summaries. Coverage includes • A practical, start-to-finish approach to consistently meeting PDN performance goals • Understanding how signals interact with interconnects • Identifying root causes of common problems, so you can avoid them • Leveraging analysis tools to efficiently explore design space and optimize tradeoffs • Analyzing impedance-related properties of series and parallel RLC circuits • Measuring low impedance for components and entire PDN ecologies • Predicting loop inductance from physical design features • Reducing peak impedances from combinations of capacitors • Understanding power and ground plane properties in the PDN interconnect • Taming signal integrity problems when signals change return planes • Reducing peak impedance created by on-die capacitance and package lead inductance • Controlling transient current waveform interactions with PDN features • Simple spreadsheet-based analysis techniques for quickly creating first-pass designs This guide will be indispensable for all engineers involved in PDN design, including product, board, and chip designers; system, hardware, component, and package engineers; power supply designers, SI and EMI engineers, sales engineers, and their managers.
Download or read book PCB Design Guide to Via and Trace Currents and Temperatures written by Douglas Brooks and published by Artech House. This book was released on 2021-02-28 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A very important part of printed circuit board (PCB) design involves sizing traces and vias to carry the required current. This exciting new book will explore how hot traces and vias should be and what board, circuit, design, and environmental parameters are the most important. PCB materials (copper and dielectrics) and the role they play in the heating and cooling of traces are covered. The IPC curves found in IPC 2152, the equations that fit those curves and computer simulations that fit those curves and equations are detailed. Sensitivity analyses that show what happens when environments are varied, including adjacent traces and planes, changing trace lengths, and thermal gradients are presented. Via temperatures and what determines them are explored, along with fusing issues and what happens when traces are overloaded. Voltage drops across traces and vias, the thermal effects going around right-angle corners, and frequency effects are covered. Readers learn how to measure the thermal conductivity of dielectrics and how to measure the resistivity of copper traces and why many prior attempts to do so have been doomed to failure. Industrial CT Scanning, and whether or not they might replace microsections for measuring trace parameters are also considered.
Download or read book Signal and Power Integrity simplified written by Eric Bogatin and published by Pearson Education. This book was released on 2010 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the inclusion of the two new hot topics in signal integrity, power integrity and high speed serial links, this book will be the most up to date complete guide to understanding and designing for signal integrity.
Download or read book Power Electronic Modules written by William W. Sheng and published by CRC Press. This book was released on 2004-09-29 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing and building power semiconductor modules requires a broad, interdisciplinary base of knowledge and experience, ranging from semiconductor materials and technologies, thermal management, and soldering to environmental constraints, inspection techniques, and statistical process control. This diversity poses a significant challenge to engine
Download or read book EW 105 Space Electronic Warfare written by David L. Adamy and published by Artech House. This book was released on 2021-01-31 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth book in the bestselling Artech House EW 100 series explores electronic warfare (EW) in space. Practical problems – including intercept and jamming of hostile signals transmitted from the Earth’s surface and the vulnerability of satellite links to attack from the Earth’s surface are discussed. Spherical trigonometry is covered to provide the background necessary to understand the scope of satellite problems. Orbit mechanics, specifically the way the Earth and its satellites revolve around one another, is also explained. The basics of radio propagation and how it applies to communications Electronic Warfare are demonstrated, as well as the special considerations that apply to radio transmission to and from an Earth satellite. Satellite links and link vulnerability are discussed. Readers learn how to calculate the distance over which a satellite can view as a function of its orbital parameters, how long the satellite can see that point, and the frequency shift in signals received by the satellite or an Earth based receiver. EW applications of orbit mechanics, satellite links, radio propagation and link vulnerability. Written by an expert in the field, this book is useful for technical and non-technical professionals.
Download or read book Lithium Ion Batteries and Applications A Practical and Comprehensive Guide to Lithium Ion Batteries and Arrays from Toys to Towns Volume 2 Applications written by Davide Andrea and published by Artech House. This book was released on 2020-06-30 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, two-volume resource provides a thorough introduction to lithium ion (Li-ion) technology. Readers get a hands-on understanding of Li-ion technology, are guided through the design and assembly of a battery, through deployment, configuration and testing. The book covers dozens of applications, with solutions for each application provided. Volume Two focuses on small batteries in consumer products and power banks, as well as large low voltage batteries in stationary or mobile house power, telecom, residential, marine and microgrid. Traction batteries, including passenger, industrial, race vehicles, public transit, marine, submarine and aircraft are also discussed. High voltage stationary batteries grid-tied and off-grid are presented, exploring their use in grid quality, arbitrage and back-up, residential, microgrid, industrial, office buildings. Finally, the book explores what happens when accidents occur, so readers may avoid these mistakes. Written by a prominent expert in the field and packed with over 500 illustrations, these volumes contain solutions to practical problems, making it useful for both the novice and experienced practitioners.
Download or read book High speed Circuit Board Signal Integrity written by Stephen C. Thierauf and published by Artech House. This book was released on 2004 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This leading-edge circuit design resource offers the knowledge needed to quickly pinpoint transmission problems that can compromise circuit design. Discusses both design and debug issues at gigabit per second data rates.
Download or read book High Speed Digital System Design written by Anatoly Belous and published by Springer Nature. This book was released on 2019-11-13 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers the entire, interconnected complex of theoretical and practical aspects of designing and organizing the production of various electronic devices, the general and main distinguishing feature of which is the high speed of processing and transmitting of digital signals. The authors discuss all the main stages of design - from the upper system level of the hierarchy (telecommunications system, 5G mobile communications) to the lower level of basic semiconductor elements, printed circuit boards. Since the developers of these devices in practice deal with distorted digital signals that are transmitted against a background of interference, the authors not only explain the physical nature of such effects, but also offer specific solutions as to how to avoid such parasitic effects, even at the design stage of high-speed devices.
Download or read book Semiconductor Packaging written by Andrea Chen and published by CRC Press. This book was released on 2016-04-19 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: In semiconductor manufacturing, understanding how various materials behave and interact is critical to making a reliable and robust semiconductor package. Semiconductor Packaging: Materials Interaction and Reliability provides a fundamental understanding of the underlying physical properties of the materials used in a semiconductor package. By tying together the disparate elements essential to a semiconductor package, the authors show how all the parts fit and work together to provide durable protection for the integrated circuit chip within as well as a means for the chip to communicate with the outside world. The text also covers packaging materials for MEMS, solar technology, and LEDs and explores future trends in semiconductor packages.
