Download or read book New Trends in Removal of Heavy Metals from Industrial Wastewater written by Maulin P. Shah and published by Elsevier. This book was released on 2021-04-23 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Trends in Removal of Heavy Metals from Industrial Wastewater covers the applicable technologies relating to the removal of heavy metals from wastewater and new and emerging trends in the field, both at the laboratory and industrial scale. Sections explore new environmentally friendly technologies, the principles of sustainable development, the main factors contributing to heavy metal removal from wastewater, methods and procedures, materials (especially low-cost materials originated from industrial and agricultural waste), management of wastewater containing heavy metals and wastewater valorization, recycling, environmental impact, and wastewater policies for post heavy metal removal. This book is an advanced and updated vision of existing heavy metal removal technologies with their limitations and challenges and their potential application to remove heavy metals/environmental pollutants through advancements in bioremediation. Finally, sections also cover new trends and advances in environmental bioremediation with recent developments in this field by an application of chemical/biochemical and environmental biotechnology. - Outlines the fate and occurrence of heavy metals in Wastewater Treatment Plants (WWTPs) and potential approaches for their removal - Describes the techniques currently available for removing heavy metals from wastewater - Discusses the emerging technologies in heavy metal removal - Covers biological treatments to remove heavy metals - Includes the valorization of heavy metal containing wastewater
Download or read book Biosorption heavy Metal Ions from Industrial mining Waste Waters written by Dennis W. Darnall and published by . This book was released on 1986 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biosorption written by Jan Derco and published by BoD – Books on Demand. This book was released on 2018-07-18 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Municipal and industrial wastewaters contain a wide spectrum of pollutants. Their effective removal presents a challenge for water treatment technology. Biosorption of nutrients and pollutants has been used in sewage treatment since the discovery of the activated sludge process. It is a passive uptake process by which pollutants are adsorbed on the surface of cell walls and/or dissolved in structures of microorganism cells that are present in sludge. Sorbed pollutants remain in the sludge and can be potentially released back into the environment depending on their condition and the reversibility of the pollutant-sludge interaction. An overview of typical biosorption applications for the removal of nutrients, organic pollutants, and metals in wastewater treatment is provided in different areas of their use for the protection of aquatic ecosystems and human health. This book will be of interest to operators of wastewater treatment plants and sludge treatment and disposal facilities as well as to researchers and university students in the field of environmental engineering.
Download or read book Biosorption of Heavy Metals written by Bohumil Volesky and published by CRC Press. This book was released on 1990-08-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art volume represents the first comprehensively written book which focuses on the new field of biosorption. This fascinating work conveys essential fundamental information and outlines the perspectives of biosorption. It summarizes the metal-sorbing properties of nonliving bacterial, fungal, and algal biomass, plus highlights relevant metal-binding mechanisms. This volume also discusses the aspects of obtaining and processing microbial biomass and metal-chelating chemicals into industrially applicable biosorbent products. Microbiologists, chemists, and engineers with an interest in new technological and scientific horizons will find this reference indispensable.
Download or read book Biosorption Processes for Heavy Metal Removal written by Saini, Pinki and published by IGI Global. This book was released on 2024-03-11 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Persistent and non-degradable, heavy metals stand as pollutants with the potential for severe ecological repercussions when released into the environment. Municipal and industrial wastewater face a high risk of contamination by these hazardous substances, posing a formidable challenge to water treatment technologies. The imperative is clear: effective and affordable methods for effluent treatment and metal recovery are essential for meeting regulatory standards and unlocking the latent value of valuable metals within the waste. However, new methods of accomplishing this challenge are necessary for increasing the effectiveness in both cost and application Biosorption Processes for Heavy Metal Removal comprehensively explores the imperative to remove heavy metals from waste streams. It provides an insightful overview of biosorbents and biosorption technology, focusing on their underlying biosorption features. The compilation within this book comprises of a series of review articles delving into the current understanding of biosorption mechanisms and biochemistry, the efficacy of bacterial, fungal, and algal biomass, and practical considerations for biosorbent preparation and engineering. The physicochemical evaluations of biosorbents, process optimization, and factors influencing biosorption efficiency are also covered. Furthermore, the book explores biosorption applications for removing nutrients, organic pollutants, and metals in wastewater treatment across diverse contexts. Geared towards administrators, policymakers, consultants, industry professionals, academicians, scientists, researchers, and graduate and post-graduate students in environmental sciences and related fields, this book serves as their comprehensive reference.
Download or read book Biosorbents for Metal Ions written by D A John Wase and published by CRC Press. This book was released on 1997-08-05 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals can be dispersed, both naturally and by man's activities, into any of the Earth's elements - soil, water or air. Biological techniques for removing metal pollutants from soil, air or water are now attracting great interest, both because they are seen as more environmentally friendly than chemical treatments, and because, in some cases at lea
Download or read book Biosorption for Wastewater Contaminants written by Rangabhashiyam Selvasembian and published by John Wiley & Sons. This book was released on 2021-10-25 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution due to various anthropogenic activities continues to increase. In terms of water pollutants, organic and inorganic pollutants are the most problematic. Although several measures have been proposed and implemented to prevent or reduce contamination, their increased concentration in water bodies has created serious concerns. Over the years, the problem has been aggravated by industrialization, urbanization and the exploitation of natural resources. The direct discharge of wastewater contaminants and their geographical mobilization have caused an increase in concentration in ground, surface, fluvial and residual waters. Extensive information about detection and disposal methods is needed in order to develop technological solutions for a variety of environments, both urban and rural. This book provides up-to-date information on wastewater contaminants, aimed at researchers, engineers and technologists working in this field. Conventional physicochemical techniques used to remove contaminants from wastewater include ion exchange, precipitation, degradation, coagulation, coating, membrane processes and adsorption. However, these applications have technological and economic limitations, and involve the release of large amounts of chemical reagents and by-products that are themselves difficult to remove. Biosorption - the use of organically generated material as an adsorbent – is attracting new research and scholarship. Thermally-treated calcined biomaterials may be treated to remove heavy metals from wastewater. To ensure the elimination of these contaminants, existing solutions must be integrated with intelligent biosorption functions. Biosorption for Wastewater Contaminants will find an appreciative audience among academics and postgraduates working in the fields of environmental biotechnology, environmental engineering, wastewater treatment technology and environmental chemistry.
Download or read book Biosorption of Metal Contaminants Using Immobilized Biomass written by Thomas H. Jeffers and published by . This book was released on 1993 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Biosorption for Removal of Heavy Metals from Wastewater written by Sri Lakshmi Ramya and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh water accounts for 3% of water resources on the Earth. Human and industrial activities produce and discharge wastes containing heavy metals into the water resources making them unavailable and threatening human health and the ecosystem. Conventional methods for the removal of metal ions such as chemical precipitation and membrane filtration are extremely expensive when treating large amounts of water, inefficient at low concentrations of metal (incomplete metal removal) and generate large quantities of sludge and other toxic products that require careful disposal. Biosorption and bioaccumulation are ecofriendly alternatives. These alternative methods have advantages over conventional methods. Abundant natural materials like microbial biomass, agro-wastes, and industrial byproducts have been suggested as potential biosorbents for heavy metal removal due to the presence of metal-binding functional groups. Biosorption is influenced by various process parameters such as pH, temperature, initial concentration of the metal ions, biosorbent dose, and speed of agitation. Also, the biomass can be modified by physical and chemical treatment before use. The process can be made economical by regenerating and reusing the biosorbent after removing the heavy metals. Various bioreactors can be used in biosorption for the removal of metal ions from large volumes of water or effluents. The recent developments and the future scope for biosorption as a wastewater treatment option are discussed.
Download or read book Microbial Biosorption of Metals written by Pavel Kotrba and published by Springer Science & Business Media. This book was released on 2011-01-13 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy metals always pose serious ecological risks when released into the environment due to their elemental non-degradable nature, regardless of their chemical form. This calls for the development of efficient and low-cost effluent treatment and metal recuperation technologies for contaminated waste water, not only because regulatory limits need to be met but also because the waste itself can be a resource for certain precious metals. Biosorption is a general property of living and dead biomass to rapidly bind and abiotically concentrate inorganic or organic compounds from even very diluted aqueous solutions. As a specific term, biosorption is a method that utilizes materials of biological origin – biosorbents formulated from non-living biomass - for the removal of target substances from aqueous solutions. Recent research on biosorption provides a solid understanding of the mechanism underlying microbial biosorption of heavy metals and related elements. This book gathers review articles analyzing current views on the mechanism and (bio)chemistry of biosorption, the performance of bacterial, fungal and algal biomass, and the practical aspects of biosorbent preparation and engineering. It also reviews the physico-chemical evaluations of biosorbents and modelling of the process as well as the importance of biosorption during heavy metal removal using living cells. It is a reference work for scientists, environmental safety engineers and R&D specialists who wish to further promote biosorption research and use the accumulated knowledge to develop and build industrial applications of biosorption in heavy metal separation technologies.
Download or read book Prospects and Challenges in Algal Biotechnology written by Bhumi Nath Tripathi and published by Springer. This book was released on 2017-11-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume presents the latest research and state-of-the-art approaches in the study of microalgae. It describes in detail technologies for the cultivation of marine, freshwater and extremophilic algae, as well as phototrophic biofilms, cyanobacterial mats and periphytons, including the media requirements and growth rates of different types of algae. The second part of the book is dedicated to the biotechnological applications of algal biomass and secondary metabolites produced by these organisms, and critically discusses topics such as algae-based biofuels and CO2 sequestration. In addition, it reviews the prospects and challenges of algal bioremediation of domestic and industrial wastewaters, including the use of planktonic and self-immobilized algae systems in wastewater treatment, explaining their merits and drawbacks. Lastly, it highlights research methods and approaches related to the production of high-value products and bioactive compounds.
Download or read book Water Pollution and Remediation Heavy Metals written by Inamuddin and published by Springer Nature. This book was released on 2020-11-18 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution of waters by toxic metals is accelerating worldwide due to industrial and population growth, notably in countries having poor environmental laws, resulting in many diseases such as cancer. Classical remediation techniques are limited. This books reviews new, advanced or improved techniques for metal removal, such as hybrid treatments, nanotechnologies and unconventional adsorbents, e.g. metal-organic frameworks. Contaminants include rare earth elements, arsenic, lead, cadmium, chromium, copper and effluents from the electronic, textile, agricultural and pharmaceutical industries.
Download or read book Descriptive Inorganic Chemistry written by Geoff Rayner-Canham and published by Macmillan Higher Education. This book was released on 2013-12-22 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: This bestselling text gives students a less rigorous, less mathematical way of learning inorganic chemistry, using the periodic table as a context for exploring chemical properties and uncovering relationships between elements in different groups. The authors help students understand the relevance of the subject to their lives by covering both the historical development and fascinating contemporary applications of inorganic chemistry (especially in regard to industrial processes and environmental issues). The new edition offers new study tools, expanded coverage of biological applications, and new help with problem-solving.
Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2005-03-11 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.
Download or read book Emerging Techniques for Treatment of Toxic Metals from Wastewater written by Akil Ahmad and published by Elsevier. This book was released on 2022-08-27 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Techniques for Treatment of Toxic Metals from Wastewater explores the different physical and chemical methods that can be used to remove toxins from wastewater, including adsorption, solvent extraction, ion exchange, precipitation, filtration and photocatalytic degradation. Bringing together contributions from leading experts in the field, the book covers each of the different techniques in detail, combining emergent research outcomes with fundamental theoretical concepts to provide a clear appraisal of the different techniques available, along with their applications. It is an essential recourse for researchers, industrialists and students concerned with the remediation of toxic metals from water and wastewater. - Covers the various techniques for metal removal and their applications in a single source - Addresses emerging technologies; chemical, physical, and biological including nanotechnology - Brings together novel techniques and their applications for enhancing large scale industrial production signposting opportunities for significant enhancements
Download or read book Heavy Metals In Water written by Sanjay K. Sharma and published by Royal Society of Chemistry. This book was released on 2014 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest research on dissolved heavy metals in drinking water and their removal.
Download or read book Methods for Bioremediation of Water and Wastewater Pollution written by Inamuddin and published by Springer Nature. This book was released on 2020-10-05 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced techniques for wastewater treatment and the chapters review the environmental impact of water pollution, the analysis of water quality, and technologies for the preservation of water resources. Also outlined in this volume is the bioremediation of heavy metals, dyes, bisphenols, phthalates, cyanobacteria in contaminated water and wastewater. Another focus of this book is the use of natural remediation techniques such as bacterial biofilms and enzymes.
