Download or read book Design of Concrete Structures Using High strength Steel Reinforcement written by Bahram M. Shahrooz and published by Transportation Research Board. This book was released on 2011 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaluates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online.

Download or read book Behavior of Concrete Structures Reinforced with High Strength Steel written by Rahman Sabbar Kareem and published by . This book was released on 2020 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural strength and corrosion resistance of concrete members are improved when A1035 steel is used as the main reinforcement. The enhancement of A1035 is achieved by the modification of the composition and microstructure of the steel. Therefore, the behavior of concrete structures reinforced with high-performance steel (A1035) is different from those reinforced with the regular steel (A615). Concrete bridge decks reinforced with different amounts of A1035 were studied in this research program. The structural behavior of twelve concrete bridge decks reinforced with A615 Grade 420 (60 ksi) and A1035 Grade 830 (120 ksi) steel was investigated at both service and strength limit states. The tensile strain of steel and compressive strain of the concrete were measured in each load step. In addition to measuring the deflection, a microscope was used to measure the maximum crack width during testing. Then, the finite element method was used to model the concrete bridge decks. ABAQUS software was used to represent the model. The concrete material was represented by C3D8 elements, and the steel material was modeled by T3D2 elements. Concrete Damaged Plasticity Model was used to represent the nonlinear behavior of concrete. The plastic behavior of the reinforcing steel was represented by Plasticity option. The final part of the dissertation focuses on investigating the structural behavior of concrete beams reinforced with A1035 and cast with different concrete strengths. The structural behavior of eight reinforced concrete beams was investigated. Two types of reinforcement were used, regular steel (A615) and high-performance steel (A1035). Three different concrete strengths were used, normal, high, and ultra-high strength. The deflection, maximum crack width, compressive strain of concrete, and tensile strain of steel were measured during testing.

Download or read book Advances in Civil Engineering and Building Materials written by Shuenn-Yih Chang and published by CRC Press. This book was released on 2012-10-31 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Civil Engineering and Building Materials presents the state-of-the-art development in: - Structural Engineering - Road & Bridge Engineering- Geotechnical Engineering- Architecture & Urban Planning- Transportation Engineering- Hydraulic Engineering - Engineering Management- Computational Mechanics- Construction Technology- Buildi

Download or read book Bond Behavior of High Performance Reinforcing Bars for Concrete Structures written by Amr Ihab-Ahmed Hosny and published by . This book was released on 2007 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keywords: Reinforced Concrete, High Strength Steel, High Performance Steel, Bond.

Download or read book Steel Fiber Reinforced Concrete written by Harvinder Singh and published by Springer. This book was released on 2016-10-26 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses design aspects of steel fiber-reinforced concrete (SFRC) members, including the behavior of the SFRC and its modeling. It also examines the effect of various parameters governing the response of SFRC members in detail. Unlike other publications available in the form of guidelines, which mainly describe design methods based on experimental results, it describes the basic concepts and principles of designing structural members using SFRC as a structural material, predominantly subjected to flexure and shear. Although applications to special structures, such as bridges, retaining walls, tanks and silos are not specifically covered, the fundamental design concepts remain the same and can easily be extended to these elements. It introduces the principles and related theories for predicting the role of steel fibers in reinforcing concrete members concisely and logically, and presents various material models to predict the response of SFRC members in detail. These are then gradually extended to develop an analytical flexural model for the analysis and design of SFRC members. The lack of such a discussion is a major hindrance to the adoption of SFRC as a structural material in routine design practice. This book helps users appraise the role of fiber as reinforcement in concrete members used alone and/or along with conventional rebars. Applications to singly and doubly reinforced beams and slabs are illustrated with examples, using both SFRC and conventional reinforced concrete as a structural material. The influence of the addition of steel fibers on various mechanical properties of the SFRC members is discussed in detail, which is invaluable in helping designers and engineers create optimum designs. Lastly, it describes the generally accepted methods for specifying the steel fibers at the site along with the SFRC mixing methods, storage and transport and explains in detail methods to validate the adopted design. This book is useful to practicing engineers, researchers, and students.

Download or read book Guide for the Design and Construction of Concrete Reinforced with Fiber Reinforced Polymer Bars written by ACI Committee 440 and published by . This book was released on 2003 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete written by Edward G. Nawy and published by Prentice Hall. This book was released on 2009 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: For one-semester, junior/senior-level and graduate courses in Reinforced Concrete in the department of civil engineering. Now reflecting the new 2008 ACI 318-08 Code and the new International Building Code (IBC-2006), the Sixth Edition of this cutting-edge text has been extensively revised to present state-of-the-art developments in reinforced concrete. It analyzes the design of reinforced concrete members through a unique and practical step-by-step trial and adjustment procedure. The narrative is supplemented with flowcharts to guide students logically through the learning process. Ample photographs of instructional testing of concrete members decreases the need for actual laboratory testing.

Download or read book Shear Behavior of Concrete Beams Reinforced with High Performance Steel Shear Reinforcement written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The current shear design provisions of the ACI 318 specifications limit the yield strength in transverse reinforcement to 60 ksi. Advancement in technology has led to the fabrication of High Performance steel. Use of HP steel in reinforced concrete could lead to cost savings by reducing the amount of steel required due to the inherited high strength and increase of the service life of structural members due to its enhanced corrosion resistance. This research is undertaken to examine the use of high performance steel as a feasible reinforcement material for reinforced concrete structures. Commercially available steel, Micro-Composite Multi-Structural Formable (MMFX), conforming to ASTM A 1035, was selected for this study. MMFX steel has minimum yield strength of 100 ksi. This experimental program comprised eighteen tests using nine large-scale reinforced concrete beams subjected to static loading up to failure. The key parameters considered in experimental program were the steel type and the amount of shear reinforcement. This research investigated crack width, modes of failure, deflection, stirrup strain, ultimate load carrying capacity and the behavior of the MMFX steel as transverse reinforcement for concrete beams. Results from the experimental program show that by utilizing the higher yield strength and consequently reducing the reinforcement ratio of MMFX steel, the beams can achieve almost the same load-carrying capacity as the beams reinforced with conventional Grade 60 steel. Also, beams reinforced with MMFX showed similar deflections at service load as the beams reinforced with Grade 60 steel. Therefore, reduction in the reinforcement ratio of MMFX steel, did not affect the serviceability of these beams. Analysis shows that the ACI 318, CSA, and AASHTO LRFD design codes can closely predict the ultimate shear strength for beams reinforced with high performance steel having yield strength up to 100 ksi. The beams were also analyzed using a well-established Mo.

Download or read book Fire Design of Concrete Structures Structural Behaviour and Assessment written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is well known to behave efficiently in fire conditions, as it is incombustible, does not emit smoke, and provides good thermal insulation. Furthermore, in reinforced concrete structures, the concrete cover gives a natural protection to the reinforcement, and the size of the sections often delays the heating of the core, thus favouring the fire resistance of the structural members. In addition, concrete structures are often robust and therefore able to accommodate local damage without major consequences to the overall structural integrity. However, past experience with real fires shows that a thorough understanding of concrete behaviour and structural mechanics is still needed to improve the design of R/C structures with respect to fire. The objective of fib Bulletin 46 is to augment the current knowledge about concrete and concrete structures under fire, not only for the design of new structures, but also for the analysis and repair of existing fire-damaged structures. Both structural and materials issues are examined, and the results of the most recent research activities on the structural performance of concrete subjected to fire are reported. Special attention is paid to the indirect actions caused by the restrained thermal deformations and several basic examples show how a local fire influences global structural behaviour. fib Bulletin 46 is intended for use by practicing engineers to improve their understanding of the behaviour of concrete structures in fire and thereby produce better and safer design standards.

Download or read book Physical Properties and Behaviour of High Performance Concrete at High Temperature written by Pierre Pimienta and published by Springer. This book was released on 2018-09-11 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the behaviour of high-performance concretes at high temperature. The book presents the state of the art of experimental data on High-Performance concretes and it collects and synthesizes useful data about concrete behaviour at high temperatures. The book is divided into independent chapters dealing with degradation reactions in concrete exposed to high temperatures; mass transport properties; thermal properties; and mechanical properties. The results presented especially target a group of users composed by universities and testing laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.

Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.

Download or read book Structural Concrete Volume 1 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2009-01-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Fundamentals written by Phil M. Ferguson and published by Wiley. This book was released on 1991-01-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Fifth Edition maintains the basic Ferguson approach in which design procedures stem from and provide the basis for a clear understanding of the behavior of reinforced concrete. Behavior of reinforced concrete members and assemblages at every load stage is illustrated with illustrations and photos, and calculation models that relate to the physical behaviors are provided to help students and practitioners recognize and assess various design situations. To avoid confusion, many of the examples now use customary or English units, rather than SI units as in the Fourth Edition. This edition conforms to the technical changes in the '83 and '86 revisions to the ACI Building Code. In this edition, service load analysis of stresses, computuations of deflection and distribution of reinforcement to control crack widths have been incorporated with the sections that treat analysis and design of flexural members. Material relating to seismic design has been revised and expanded, and more emphasis has been placed on developing conceptual models for design.

Download or read book Behavior of High Performance Steel as Shear Reinforcement for Concrete Beams written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this research is to study the feasibility of using high performance steel as shear reinforcement for concrete beams. High performance steel is characterized by enhanced corrosion resistance and higher strength in comparison to conventional Grade 60 steel reinforcement. Advantages of using higher strength steel include the ability to design for longer span lengths and/or reducing the amount of material needed for design. This could greatly reduce the overall costs of construction for future structures. Nine reinforced concrete beams were constructed using No. 9 longitudinal bars and No. 3 bars for the stirrups. The main variables considered in the study are the stirrup spacing and the type of reinforcing steel material. Testing was performed using a single concentrated load positioned closer to one end of the beam, which allowed for two tests per beam. Research findings indicate that using MMFX stirrups increases the overall shear strength and enhances serviceability by distributing cracks and reducing crack width. Pairing high performance longitudinal and transverse reinforcement shows an optimum design in terms of strength gain and reduction in crack width. Enhanced serviceability behavior can be attributed to the better bond characteristics of MMFX steel in comparison to conventional Grade 60 steel. Test results suggest that combining high performance steel with high strength concrete could lead to a better utilization of the materials. Analysis shows that the ACI 318-05, CSA, and AASHTO LRFD design codes can conservatively be used for the design of high performance steel up to a yield strength of 80 ksi. Detailed analysis using the Modified Compression Field Theory can be used to accurately predict the behavior of the beams.

Download or read book FRP Composites for Reinforced and Prestressed Concrete Structures written by Perumalsamy Balaguru and published by CRC Press. This book was released on 2008-11-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: High strength fibre composites (FRPs) have been used with civil structures since the 1980s, mostly in the repair, strengthening and retrofitting of concrete structures. This has attracted considerable research, and the industry has expanded exponentially in the last decade. Design guidelines have been developed by professional organizations in a number of countries including USA, Japan, Europe and China, but until now designers have had no publication which provides practical guidance or accessible coverage of the fundamentals. This book fills this void. It deals with the fundamentals of composites, and basic design principles, and provides step-by-step guidelines for design. Its main theme is the repair and retrofit of un-reinforced, reinforced and prestressed concrete structures using carbon, glass and other high strength fibre composites. In the case of beams, the focus is on their strengthening for flexure and shear or their stiffening. The main interest with columns is the improvement of their ductility; and both strengthening and ductility improvement of un-reinforced structures are covered. Methods for evaluating the strengthened structures are presented. Step by step procedures are set out, including flow charts, for the various structural components, and design examples and practice problems are used to illustrate. As infrastructure ages worldwide, and its demolition and replacement becomes less of an option, the need for repair and retrofit of existing facilities will increase. Besides its audience of design professionals, this book suits graduate and advanced undergraduate students.

Download or read book Reinforced Concrete Beams Columns and Frames written by Jostein Hellesland and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.

Download or read book Basic Principles of Concrete Structures written by Xianglin Gu and published by Springer. This book was released on 2015-12-09 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications. The book will focus on both the theoretical derivations and the engineering practices.