Download or read book Battery Management Systems Volume III Physics Based Methods written by Gregory L. Plett and published by Artech House. This book was released on 2024-01-31 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book -- the third and final volume in a series describing battery-management systems – shows you how to use physics-based models of battery cells in a computationally efficient way for optimal battery-pack management and control to maximize battery-pack performance and extend life. It covers the foundations of electrochemical model-based battery management system while introducing and teaching the state of the art in physics-based methods for battery management. Building upon the content in volumes I and II, the book helps you identify parameter values for physics-based models of a commercial lithium-ion battery cell without requiring cell teardown; shows you how to estimate the internal electrochemical state of all cells in a battery pack in a computationally efficient way during operation using these physics-based models; demonstrates the use the models plus state estimates in a battery management system to optimize fast-charge of battery packs to minimize charge time while also maximizing battery service life; and takes you step-by-step through the use models to optimize the instantaneous power that can be demanded from the battery pack while also maximizing battery service life. The book also demonstrates how to overcome the primary roadblocks to implementing physics-based method for battery management: the computational-complexity roadblock, the parameter-identification roadblock, and the control-optimization roadblock. It also uncovers the fundamental flaw in all present “state of art” methods and shows you why all BMS based on equivalent-circuit models must be designed with over-conservative assumptions. This is a strong resource for battery engineers, chemists, researchers, and educators who are interested in advanced battery management systems and strategies based on the best available understanding of how battery cells operate.
Download or read book Battery Management Systems Volume I Battery Modeling written by Gregory L. Plett and published by Artech House. This book was released on 2015-09-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large-scale battery packs are needed in hybrid and electric vehicles, utilities grid backup and storage, and frequency-regulation applications. In order to maximize battery-pack safety, longevity, and performance, it is important to understand how battery cells work. This first of its kind new resource focuses on developing a mathematical understanding of how electrochemical (battery) cells work, both internally and externally. This comprehensive resource derives physics-based micro-scale model equations, then continuum-scale model equations, and finally reduced-order model equations. This book describes the commonly used equivalent-circuit type battery model and develops equations for superior physics-based models of lithium-ion cells at different length scales. This resource also presents a breakthrough technology called the “discrete-time realization algorithm” that automatically converts physics-based models into high-fidelity approximate reduced-order models.
Download or read book Battery Management Systems Volume II Equivalent Circuit Methods written by Gregory L. Plett and published by Artech House. This book was released on 2015-12-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume discusses state-of-the-art applications of equivalent-circuit models as they pertain to solving problems in battery management and control. Readers are provided information on how to use models from Volume I to control battery packs, along with discussion of fundamental flaws in current approaches. In addition, Volume II introduces the ideas of physics-based optimal battery controls and explains why they can be superior to the state-of-the-art equivalent-circuit controls.
Download or read book Battery Management Systems written by H.J. Bergveld and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery Management Systems - Design by Modelling describes the design of Battery Management Systems (BMS) with the aid of simulation methods. The basic tasks of BMS are to ensure optimum use of the energy stored in the battery (pack) that powers a portable device and to prevent damage inflicted on the battery (pack). This becomes increasingly important due to the larger power consumption associated with added features to portable devices on the one hand and the demand for longer run times on the other hand. In addition to explaining the general principles of BMS tasks such as charging algorithms and State-of-Charge (SoC) indication methods, the book also covers real-life examples of BMS functionality of practical portable devices such as shavers and cellular phones. Simulations offer the advantage over measurements that less time is needed to gain knowledge of a battery's behaviour in interaction with other parts in a portable device under a wide variety of conditions. This knowledge can be used to improve the design of a BMS, even before a prototype of the portable device has been built. The battery is the central part of a BMS and good simulation models that can be used to improve the BMS design were previously unavailable. Therefore, a large part of the book is devoted to the construction of simulation models for rechargeable batteries. With the aid of several illustrations it is shown that design improvements can indeed be realized with the presented battery models. Examples include an improved charging algorithm that was elaborated in simulations and verified in practice and a new SoC indication system that was developed showing promising results. The contents of Battery Management Systems - Design by Modelling is based on years of research performed at the Philips Research Laboratories. The combination of basic and detailed descriptions of battery behaviour both in chemical and electrical terms makes this book truly multidisciplinary. It can therefore be read both by people with an (electro)chemical and an electrical engineering background.
Download or read book Battery Management Systems for Large Lithium Ion Battery Packs written by Davide Andrea and published by Artech House. This book was released on 2010 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book provides you with a solid understanding of battery management systems (BMS) in large Li-Ion battery packs, describing the important technical challenges in this field and exploring the most effective solutions. You find in-depth discussions on BMS topologies, functions, and complexities, helping you determine which permutation is right for your application. Packed with numerous graphics, tables, and images, the book explains the OC whysOCO and OC howsOCO of Li-Ion BMS design, installation, configuration and troubleshooting. This hands-on resource includes an unbiased description and comparison of all the off-the-shelf Li-Ion BMSs available today. Moreover, it explains how using the correct one for a given application can help to get a Li-Ion pack up and running in little time at low cost."
Download or read book A Systems Approach to Lithium Ion Battery Management written by Phil Weicker and published by Artech House. This book was released on 2013-11-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of lithium ion batteries has brought a significant shift in the area of large format battery systems. Previously limited to heavy and bulky lead-acid storage batteries, large format batteries were used only where absolutely necessary as a means of energy storage. The improved energy density, cycle life, power capability, and durability of lithium ion cells has given us electric and hybrid vehicles with meaningful driving range and performance, grid-tied energy storage systems for integration of renewable energy and load leveling, backup power systems and other applications. This book discusses battery management system (BMS) technology for large format lithium-ion battery packs from a systems perspective. This resource covers the future of BMS, giving us new ways to generate, use, and store energy, and free us from the perils of non-renewable energy sources. This book provides a full update on BMS technology, covering software, hardware, integration, testing, and safety.
Download or read book Battery Management Systems written by Gregory L. Plett and published by Artech House Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-Of-The-Art applications of equivalent-circuit methods as they pertain to solving problems in battery management and control.
Download or read book Battery Management System for Future Electric Vehicles written by Dirk Söffker and published by MDPI. This book was released on 2020-11-09 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future of electric vehicles relies nearly entirely on the design, monitoring, and control of the vehicle battery and its associated systems. Along with an initial optimal design of the cell/pack-level structure, the runtime performance of the battery needs to be continuously monitored and optimized for a safe and reliable operation and prolonged life. Improved charging techniques need to be developed to protect and preserve the battery. The scope of this Special Issue is to address all the above issues by promoting innovative design concepts, modeling and state estimation techniques, charging/discharging management, and hybridization with other storage components.
Download or read book Simulation of Battery Systems written by Farschad Torabi and published by Academic Press. This book was released on 2019-11-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation of Battery Systems: Fundamentals and Applications covers both the fundamental and technical aspects of battery systems. It is a solid reference on the simulation of battery dynamics based on fundamental governing equations of porous electrodes. Sections cover the fundamentals of electrochemistry and how to obtain electrochemical governing equations for porous electrodes, the governing equations and physical characteristics of lead-acid batteries, the physical characteristics of zinc-silver oxide batteries, experimental tests and parameters necessary for simulation and validation of battery dynamics, and an environmental impact and techno-economic assessment of battery systems for different applications, such as electric vehicles and battery energy storage. The book contains introductory information, with most chapters requiring a solid background in engineering or applied science. Battery industrial companies who want to improve their industrial batteries will also find this book useful. Includes carefully selected in-text problems, case studies and illustrative examples Features representative chapter-end problems, along with practical systems and applications Covers various numerical methods, including those based on CFD and optimization, also including free codes and databases
Download or read book Battery System Modeling written by Shunli Wang and published by Elsevier. This book was released on 2021-06-23 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery System Modeling provides advances on the modeling of lithium-ion batteries. Offering step-by-step explanations, the book systematically guides the reader through the modeling of state of charge estimation, energy prediction, power evaluation, health estimation, and active control strategies. Using applications alongside practical case studies, each chapter shows the reader how to use the modeling tools provided. Moreover, the chemistry and characteristics are described in detail, with algorithms provided in every chapter. Providing a technical reference on the design and application of Li-ion battery management systems, this book is an ideal reference for researchers involved in batteries and energy storage. Moreover, the step-by-step guidance and comprehensive introduction to the topic makes it accessible to audiences of all levels, from experienced engineers to graduates. Explains how to model battery systems, including equivalent, electrical circuit and electrochemical nernst modeling Includes comprehensive coverage of battery state estimation methods, including state of charge estimation, energy prediction, power evaluation and health estimation Provides a dedicated chapter on active control strategies
Download or read book III V Integrated Circuit Fabrication Technology written by Shiban Tiku and published by CRC Press. This book was released on 2016-04-27 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaAs processing has reached a mature stage. New semiconductor compounds are emerging that will dominate future materials and device research, although the processing techniques used for GaAs will still remain relevant. This book covers all aspects of the current state of the art of III–V processing, with emphasis on HBTs. It is aimed at practicing engineers and graduate students and engineers new to the field of III–V semiconductor IC processing. The book’s primary purpose is to discuss all aspects of processing of active and passive devices, from crystal growth to backside processing, including lithography, etching, and film deposition.
Download or read book Battery Management Systems Volume III Physics Based Methods written by Gregory L Plett and published by . This book was released on 2024-01-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows you how to use physics-based models of battery cells in a computationally efficient way for optimal battery-pack management and control to maximize battery-pack performance and extend life. You'll understand the state of the art in physics-based methods for battery management and know where improvements beyond present state-of-art can still be made. With a strong emphasis on software and control aspects, the book also shows you how to overcome the primary roadblocks to implementing physics-based method for battery management: the computational-complexity roadblock, the parameter-identification roadblock, and the control-optimization roadblock.
Download or read book The Handbook of Lithium Ion Battery Pack Design written by John T. Warner and published by Elsevier. This book was released on 2024-05-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Lithium-Ion Battery Pack Design: Chemistry, Components, Types and Terminology,?Second Edition provides a clear and concise explanation of EV and Li-ion batteries for readers that are new to the field. The second edition expands and updates all topics covered in the original book, adding more details to all existing chapters and including major updates to align with all of the rapid changes the industry has experienced over the past few years. This handbook offers a layman’s explanation of the history of vehicle electrification and battery technology, describing the various terminology and acronyms and explaining how to do simple calculations that can be used in determining basic battery sizing, capacity, voltage, and energy. By the end of this book the reader will have a solid understanding of the terminology around Li-ion batteries and be able to undertake simple battery calculations. The book is immensely useful to beginning and experienced engineers alike who are moving into the battery field. Li-ion batteries are one of the most unique systems in automobiles today in that they combine multiple engineering disciplines, yet most engineering programs focus on only a single engineering field. This book provides the reader with a reference to the history, terminology and design criteria needed to understand the Li-ion battery and to successfully lay out a new battery concept. Whether you are an electrical engineer, a mechanical engineer or a chemist, this book will help you better appreciate the inter-relationships between the various battery engineering fields that are required to understand the battery as an Energy Storage System. It gives great insights for readers ranging from engineers to sales, marketing, management, leadership, investors, and government officials. Adds a brief history of battery technology and its evolution to current technologies? Expands and updates the chemistry to include the latest types Discusses thermal runaway and cascading failure mitigation technologies? Expands and updates the descriptions of the battery module and pack components and systems?? Adds description of the manufacturing processes for cells, modules, and packs? Introduces and discusses new topics such as battery-as-a-service, cell to pack and cell to chassis designs, and wireless BMS?
Download or read book Handbook on Battery Energy Storage System written by Asian Development Bank and published by Asian Development Bank. This book was released on 2018-12-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook serves as a guide to deploying battery energy storage technologies, specifically for distributed energy resources and flexibility resources. Battery energy storage technology is the most promising, rapidly developed technology as it provides higher efficiency and ease of control. With energy transition through decarbonization and decentralization, energy storage plays a significant role to enhance grid efficiency by alleviating volatility from demand and supply. Energy storage also contributes to the grid integration of renewable energy and promotion of microgrid.
Download or read book Battery Management Systems written by Valer Pop and published by Springer Science & Business Media. This book was released on 2008-05-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the field of State-of-Charge (SoC) indication for rechargeable batteries. An overview of the state-of-the-art of SoC indication methods including available market solutions from leading semiconductor companies is provided. All disciplines are covered, from electrical, chemical, mathematical and measurement engineering to understanding battery behavior. This book will therefore is for persons in engineering and involved in battery management.
Download or read book Battery Systems Engineering written by Christopher D. Rahn and published by John Wiley & Sons. This book was released on 2013-01-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete all-in-one reference on the important interdisciplinary topic of Battery Systems Engineering Focusing on the interdisciplinary area of battery systems engineering, this book provides the background, models, solution techniques, and systems theory that are necessary for the development of advanced battery management systems. It covers the topic from the perspective of basic electrochemistry as well as systems engineering topics and provides a basis for battery modeling for system engineering of electric and hybrid electric vehicle platforms. This original approach gives a useful overview for systems engineers in chemical, mechanical, electrical, or aerospace engineering who are interested in learning more about batteries and how to use them effectively. Chemists, material scientists, and mathematical modelers can also benefit from this book by learning how their expertise affects battery management. Approaches a topic which has experienced phenomenal growth in recent years Topics covered include: Electrochemistry; Governing Equations; Discretization Methods; System Response and Battery Management Systems Include tables, illustrations, photographs, graphs, worked examples, homework problems, and references, to thoroughly illustrate key material Ideal for engineers working in the mechanical, electrical, and chemical fields as well as graduate students in these areas A valuable resource for Scientists and Engineers working in the battery or electric vehicle industries, Graduate students in mechanical engineering, electrical engineering, chemical engineering.
Download or read book Many Body Quantum Theory in Condensed Matter Physics written by Henrik Bruus and published by Oxford University Press. This book was released on 2004-09-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an introduction to quantum field theory applied to condensed matter physics. The topics cover modern applications in electron systems and electronic properties of mesoscopic systems and nanosystems. The textbook is developed for a graduate or advanced undergraduate course with exercises which aim at giving students the ability to confront real problems.
