Download or read book Automation Miniature Robotics and Sensors for Nondestructive Testing and Evaluation written by Yoseph Bar-Cohen and published by . This book was released on 2000 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotic Non destructive Testing written by Carmelo Mineo and published by Mdpi AG. This book was released on 2023-02-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive testing and evaluation are commonly referred to as the vast group of analysis techniques used in civil, medical, and industrial sectors to evaluate the properties of materials, tissues, components, or structures, without causing any damage. Automation offers many benefits for non-destructive testing to cope with increasing demands, including improved reliability and higher inspection speeds. Additionally, robots enable inspections in locations that are not easily accessible to human operators and allow for humans to be removed from potentially dangerous environments. However, the perceived complexity and high costs have limited the adoption of automation. As a result, the full potential that could be derived from the seamless integration of robotic platforms with sensors, actuators, and software has not been fully explored; it could still revolutionise the way that automated inspections are performed and conceived. The recent advancements in electronics, robotics, sensor technology and software pave the way for new developments in automated testing and data-driven autonomous robotic inspections in several sectors. This Special Issue aimed to attract the latest research outcomes in the field of robotic sensing. Five papers relate to inspection systems based on robotic fixed-base manipulators, three of which are associated with in-process inspection in manufacturing applications (robotic wire-arc welding and additive manufacturing). Four papers report research advancements in mobile robotic-enabled sensing.
Download or read book Robotics and Automation Handbook written by Thomas R. Kurfess and published by CRC Press. This book was released on 2018-10-03 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the capability and utility of robots has increased dramatically with new technology, robotic systems can perform tasks that are physically dangerous for humans, repetitive in nature, or require increased accuracy, precision, and sterile conditions to radically minimize human error. The Robotics and Automation Handbook addresses the major aspects of designing, fabricating, and enabling robotic systems and their various applications. It presents kinetic and dynamic methods for analyzing robotic systems, considering factors such as force and torque. From these analyses, the book develops several controls approaches, including servo actuation, hybrid control, and trajectory planning. Design aspects include determining specifications for a robot, determining its configuration, and utilizing sensors and actuators. The featured applications focus on how the specific difficulties are overcome in the development of the robotic system. With the ability to increase human safety and precision in applications ranging from handling hazardous materials and exploring extreme environments to manufacturing and medicine, the uses for robots are growing steadily. The Robotics and Automation Handbook provides a solid foundation for engineers and scientists interested in designing, fabricating, or utilizing robotic systems.
Download or read book MicroMechatronics Second Edition written by Kenji Uchino and published by CRC Press. This book was released on 2019-07-19 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: After Uchino’s introduction of a new terminology, ‘Micromechatronics’ in 1979 for describing the application area of ‘piezoelectric actuators’, the rapid advances in semiconductor chip technology have led to a new terminology MEMS (micro-electro-mechanical-system) or even NEMS (nano-electro-mechanicalsystem) to describe mainly thin film sensor/actuator devices, a narrower area of micromechatronics coverage. New technologies, product developments and commercialization are providing the necessity of this major revision. In particular, the progresses in high power transducers, loss mechanisms in smart materials, energy harvesting and computer simulations are significant. New technologies, product developments and commercialization are providing the updating requirement for the book contents, in parallel to the deletion of old contents. Various educational/instructional example problems have been accumulated, which were integrated in the new edition in order to facilitate the self-learning for the students, and the quiz/problem creation for the instructors. Heavily revised topics from the previous edition include: high power transducers, loss mechanisms in smart materials, energy harvesting and computer simulations New technologies, product developments and commercialization helped shape the updated contents of this book where all chapters have been updated and revised. This textbook is intended for graduate students and industrial engineers studying or working in the fields of electronic materials, control system engineering, optical communications, precision machinery, and robotics. The text is designed primarily for a graduate course with the equivalent of thirty 75-minute lectures; however, it is also suitable for self-study by individuals wishing to extend their knowledge in the field.
Download or read book Rapid Automation Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2019-03-01 with total page 1566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through expanded intelligence, the use of robotics has fundamentally transformed the business industry. Providing successful techniques in robotic design allows for increased autonomous mobility, which leads to a greater productivity and production level. Rapid Automation: Concepts, Methodologies, Tools, and Applications provides innovative insights into the state-of-the-art technologies in the design and development of robotics and their real-world applications in business processes. Highlighting a range of topics such as workflow automation tools, human-computer interaction, and swarm robotics, this multi-volume book is ideally designed for computer engineers, business managers, robotic developers, business and IT professionals, academicians, and researchers.
Download or read book Research Technology 2000 written by and published by DIANE Publishing. This book was released on with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Robotics in Medicine written by Hongliang Ren and published by Academic Press. This book was released on 2020-06-20 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Robotics in Medicine: A Design Journey of Motion Generation Mechanisms and Biorobotic System Development provides a resource of knowledge and successful prototypes regarding flexible robots in medicine. With specialists in the medical field increasingly utilizing robotics in medical procedures, it is vital to improve current knowledge regarding technologies available. This book covers the background, medical requirements, biomedical engineering principles, and new research on soft robots, including general flexible robotic systems, design specifications, design rationale, fabrication, verification experiments, actuators and sensors in flexible medical robotic systems. Presenting several projects as examples, the authors also discuss the pipeline to develop a medical robotic system, including important milestones such as involved regulations, device classifications and medical standards. Covers realistic prototypes, experimental protocols and design procedures for engineering flexible medical robotics Covers the full product development pipeline for engineering new flexible robots for medical applications, including design principles and design verifications Includes detailed information for application and development of several types of robots, including Handheld Concentric-Tube Flexible Robot for Intraocular Procedures, a Preliminary Robotic Surgery Platform with Multiple Section Tendon-Driven Mechanism, a Flexible Drill for Minimally Invasive Transoral Surgical Robotic System, Four-Tendon-Driven Flexible Manipulators, Slim Single-port Surgical Manipulator with Spring Backbones and Catheter-size Channels, and much more
Download or read book Handbook of Research on Advancements in Robotics and Mechatronics written by Habib, Maki K. and published by IGI Global. This book was released on 2014-12-31 with total page 1123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of mechatronics integrates modern engineering science and technologies with new ways of thinking, enhancing the design of products and manufacturing processes. This synergy enables the creation and evolution of new intelligent human-oriented machines. The Handbook of Research on Advancements in Robotics and Mechatronics presents new findings, practices, technological innovations, and theoretical perspectives on the the latest advancements in the field of mechanical engineering. This book is of great use to engineers and scientists, students, researchers, and practitioners looking to develop autonomous and smart products and systems for meeting todays challenges.
Download or read book Biologically Inspired Intelligent Robots written by Yoseph Bar-Cohen and published by SPIE Press. This book was released on 2003 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The multidisciplinary issues involved in the development of biologically inspired intelligent robots include materials, actuators, sensors, structures, functionality, control, intelligence, and autonomy. This book reviews various aspects ranging from the biological model to the vision for the future.
Download or read book Biomimetics written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2005-11-02 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nature is the world's foremost designer. With billions of years of experience and boasting the most extensive laboratory available, it conducts research in every branch of engineering and science. Nature's designs and capabilities have always inspired technology, from the use of tongs and tweezers to genetic algorithms and autonomous legged robots.
Download or read book Shape Memory Alloys written by Corneliu Cismasiu and published by BoD – Books on Demand. This book was released on 2010-10-18 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decades, the Shape Memory Alloys, with their peculiar thermo-mechanical properties, high corrosion and extraordinary fatigue resistance, have become more popular in research and engineering applications. This book contains a number of relevant international contributions related to their properties, constitutive models and numerical simulation, medical and civil engineering applications, as well as aspects related to their processing.
Download or read book Precision Engineering written by M. V. Suryaprakash and published by Alpha Science Int'l Ltd.. This book was released on 2004 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current focus of manufacturing is towards flexible automation and miniaturization.
Download or read book Engineering Creative Design in Robotics and Mechatronics written by Habib, Maki K. and published by IGI Global. This book was released on 2013-06-30 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: While technologies continue to advance in different directions, there still holds a constant evolution of interdisciplinary development. Robotics and mechatronics is a successful fusion of disciplines into a unified framework that enhances the design of products and manufacturing processes. Engineering Creative Design in Robotics and Mechatronics captures the latest research developments in the subject field of robotics and mechatronics and provides relevant theoretical knowledge in this field. Providing interdisciplinary development approaches, this reference source prepares students, scientists, and professional engineers with the latest research development to enhance their skills of innovative design capabilities.
Download or read book Mechatronic Systems and Materials III written by Zdzis?aw Gosiewski and published by Trans Tech Publications Ltd. This book was released on 2009-01-06 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This very interesting volume is divided into 24 sections; each of which covers, in detail, one aspect of the subject-matter: I. Industrial robots; II. Microrobotics; III. Mobile robots; IV. Teleoperation, telerobotics, teleoperated semi-autonomous systems; V. Sensors and actuators in mechatronics; VI. Control of mechatronic systems; VII. Analysis of vibration and deformation; VIII. Optimization, optimal design; IX. Integrated diagnostics; X. Failure analysis; XI. Tribology in mechatronic systems; XII. Analysis of signals; XIII. Measurement techniques; XIV. Multifunctional and smart materials; XV. Metallic alloys; XVI. Biomaterials, XVII. Functional composites; XVIII. Adaptive materials; XIX. Piezoelectric materials; XXI. Ceramics and glasses; XXII. New trends in mechatronic and materials science education; XXIV. Teaching materials and laboratory facilities.
Download or read book The Coming Robot Revolution written by Yoseph Bar-Cohen and published by Springer Science & Business Media. This book was released on 2009-04-20 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Making a robot that looks and behaves like a human being has been the subject of many popular science fiction movies and books. Although the development of such a robot facesmanychallenges,themakingofavirtualhumanhaslongbeenpotentiallypossible. With recent advances in various key technologies related to hardware and software, the making of humanlike robots is increasingly becoming an engineering reality. Development of the required hardware that can perform humanlike functions in a lifelike manner has benefitted greatly from development in such technologies as biologically inspired materials, artificial intelligence, artificial vision, and many others. Producing a humanlike robot that makes body and facial expressions, communicates verbally using extensive vocabulary, and interprets speech with high accuracy is ext- mely complicated to engineer. Advances in voice recognition and speech synthesis are increasingly improving communication capabilities. In our daily life we encounter such innovations when we call the telephone operators of most companies today. As robotics technology continues to improve we are approaching the point where, on seeing such a robot, we will respond with ‘‘Wow, this robot looks unbelievably real!’’ just like the reaction to an artificial flower. The accelerating pace of advances in related fields suggests that the emergence of humanlike robots that become part of our daily life seems to be imminent. These robots are expected to raise ethical concerns and may also raise many complex questions related to their interaction with humans.
Download or read book Materials Evaluation written by and published by . This book was released on 2003 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electroactive Polymer EAP Actuators as Artificial Muscles written by Yoseph Bar-Cohen and published by SPIE Press. This book was released on 2004 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the field of EAP with attention to all aspects and full infrastructure, including the available materials, analytical models, processing techniques, and characterization methods. This second edition covers advances in EAP in electric EAP, electroactive polymer gels, ionomeric polymer-metal composites, and carbon nanotube actuators.