Download or read book Assessment of Safety Standards for Automotive Electronic Control Systems written by Qi D. Van Eikema Hommes and published by . This book was released on 2016 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Abstract: This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - Functional Safety), MIL-STD-882E (Department of Defense Standard Practice, System Safety), DO-178C (Software Considerations in Airborne Systems and Equipment Certification), Federal Motor Vehicle Safety Standards, AUTOSAR (Automotive Open System Architecture), and MISRA C (Guidelines for the Use of the C Language in Critical Systems). The assessment was carried out along the following 11 dimensions: (1) type of standard, (2) definition of safety and hazard, (3) identification of safety requirements, (4) hazard and safety analysis methods, (5) management of safety requirements, (6) risk assessment approach, (7) design for safety approach, (8) software safety, (9) system lifecycle consideration, (10) human factors consideration, and (11) approach for review, audit, and certification. The observed strengths and limitations of the standards studied in this report could support the future development of a robust functional safety approach for automotive electronic control systems."--Technical report documentation page.

Download or read book Safety Standards of Automotive Electronic Systems written by Michael J. Holmes and published by . This book was released on 2016 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: On July 6, 2012, the President signed into law a new two-year transportation reauthorization bill, the Moving Ahead for Progress in the 21st Century Act (MAP-21.) This bill authorizes funds for Federal-aid highways, highway safety programs, transit programs, and for other purposes. This book responds to the MAP-21 requirement that the Secretary of Transportation to "complete an examination of the need for safety standards with regard to electronic systems in passenger motor vehicles." Moreover, the book reviews security and privacy gaps that put American drivers at risk.

Download or read book Safety Critical Automotive Systems written by Juan R Pimentel and published by SAE International. This book was released on 2006-08-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the vehicle's most important subsystems, this book features an introduction by the editor and 40 SAE technical papers from 2001-2006. The papers are organized in the following sections, which parallel the steps to be followed while building a complete final system: Introduction to Safety-Critical Automotive Systems Safety Process and Standards Requirements, Specifications, and Analysis Architectural and Design Methods and Techniques Prototyping and Target Implementation Testing, Verifications, and Validation Methods

Download or read book Road Vehicles Functional Safety Automotive Safety Integrity Level ASIL Oriented and Safety Oriented Analyses written by British Standards Institute Staff and published by . This book was released on 1911-11-30 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Road vehicles, Private cars, Safety engineering, Analysis, Electronic equipment and components, Electrical equipment, Computer applications, Risk assessment, Failure (quality control), Classification systems, Grades (quality), Product design, Computer hardware, Safety devices, Computer software, Reliability

Download or read book Federal Motor Vehicle Safety Standards Electronic Stability Control Systems Controls and Displays Us National Highway Traffic Safety Administration Regulation Nhtsa 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-11-14 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems - Controls and Displays (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems - Controls and Displays (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 On April 6, 2007, NHTSA published a final rule establishing a new Federal motor vehicle safety standard requiring light vehicles to be equipped with electronic stability control systems. The final rule was established as part of a comprehensive plan for reducing the serious risk of rollover crashes and the risk of death and serious injury in those crashes. This document responds to several petitions for reconsideration of the final rule. After carefully considering the issues raised, the agency is granting some aspects of the petitions, and denying some aspects. This document amends the final rule accordingly. This document also fulfills the obligations of the United States with respect to initiating rulemaking in order to comply with the global technical regulation (GTR) for ESC, adopted on June 26, 2008. This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems - Controls and Displays (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section

Download or read book The Safety Promise and Challenge of Automotive Electronics written by National Research Council (U.S.). Committee on Electronic Vehicle Controls and Unintended Acceleration and published by Transportation Research Board. This book was released on 2012 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB has released the final version of TRB Special Report 308: The Safety Promise and Challenge of Automotive Electronics: Insights from Unintended Acceleration, which examines how the National Highway Traffic Safety Administration (NHTSA) regulatory, research, and defect investigation programs can be strengthened to meet the safety assurance and oversight challenges arising from the expanding functionality and use of automotive electronics. The report gives particular attention to the NHTSA response to consumer complaints of vehicles accelerating unintentionally and to concerns that faulty electronic systems may have been to blame. The committee that produced the report found that the increasingly capable and complex electronics systems being added to automobiles present many opportunities for making driving safer but also present new demands for ensuring their safe performance. These safety assurance demands pertain both to the automotive industry development and deployment of electronics systems and to the safety oversight role of NHTSA. With regard to the latter, the committee recommends that NHTSA give explicit consideration to the oversight challenges arising from automotive electronics and that the agency develop and articulate a long term strategy for meeting these challenges."--Provided by publisher.

Download or read book Functional Safety for Road Vehicles written by Hans-Leo Ross and published by Springer. This book was released on 2016-07-25 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the current challenges for engineers involved in product development and the associated changes in procedure they make necessary. Methods for systematically analyzing the requirements for safety and security mechanisms are described using examples of how they are implemented in software and hardware, and how their effectiveness can be demonstrated in terms of functional and design safety are discussed. Given today’s new E-mobility and automated driving approaches, new challenges are arising and further issues concerning “Road Vehicle Safety” and “Road Traffic Safety” have to be resolved. To address the growing complexity of vehicle functions, as well as the increasing need to accommodate interdisciplinary project teams, previous development approaches now have to be reconsidered, and system engineering approaches and proven management systems need to be supplemented or wholly redefined. The book presents a continuous system development process, starting with the basic requirements of quality management and continuing until the release of a vehicle and its components for road use. Attention is paid to the necessary definition of the respective development item, the threat-, hazard- and risk analysis, safety concepts and their relation to architecture development, while the book also addresses the aspects of product realization in mechanics, electronics and software as well as for subsequent testing, verification, integration and validation phases. In November 2011, requirements for the Functional Safety (FuSa) of road vehicles were first published in ISO 26262. The processes and methods described here are intended to show developers how vehicle systems can be implemented according to ISO 26262, so that their compliance with the relevant standards can be demonstrated as part of a safety case, including audits, reviews and assessments.

Download or read book Safety of the Intended Functionality written by Juan Pimentel and published by SAE International. This book was released on 2019-03-07 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety has been ranked as the number one concern for the acceptance and adoption of automated vehicles since safety has driven some of the most complex requirements in the development of self-driving vehicles. Recent fatal accidents involving self-driving vehicles have uncovered issues in the way some automated vehicle companies approach the design, testing, verification, and validation of their products. Traditionally, automotive safety follows functional safety concepts as detailed in the standard ISO 26262. However, automated driving safety goes beyond this standard and includes other safety concepts such as safety of the intended functionality (SOTIF) and multi-agent safety. Safety of the Intended Functionality (SOTIF) addresses the concept of safety for self-driving vehicles through the inclusion of 10 recent and highly relevent SAE technical papers. Topics that these papers feature include the system engineering management approach and redundancy technical approach to safety. As the third title in a series on automated vehicle safety, this contains introductory content by the Editor with 10 SAE technical papers specifically chosen to illuminate the specific safety topic of that book.

Download or read book Autonomous Driving written by Andreas Herrmann and published by Emerald Group Publishing. This book was released on 2018-03-26 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology and engineering behind autonomous driving is advancing at pace. This book presents the latest technical advances and the economic, environmental and social impact driverless cars will have on individuals and the automotive industry.

Download or read book Functional Safety written by David Smith and published by Routledge. This book was released on 2004-08-13 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical, electronic and programmable electronic systems, such as emergency shut down systems and railway signalling systems, increasingly carry out safety functions to guard workers and the public against injury or death and the environment against pollution. The international standard IEC 61508 has been developed as a generic standard that applies to all these systems irrespective of their application. IEC 61508 is seen by many professionals as complex. This book overcomes that complexity by introducing the standard in the context of safety in general before moving on to provide practical advice about implementing it and obtaining certification. It also explains how IEC 61508 relates to second tier standards and related guidance, such as IEC 61511, 61513, UKOOA, ISA S84.01 and DIN standards, among others. Throughout the text, the authors illustrate their explanations with examples to which the answers are supplied in the appendix. Four case studies with further exercises set the information in context. Templates and checklists for drawing up your own implementation plan and information on self-certification are also provided. As Functional Safety, the standard, is applicable to many industries, Functional Safety, the book, in its previous edition has proved to be an invaluable reference for professionals from a variety of industries, such as project/instrumentation/design/control engineers as well as safety professionals in oil and gas, chemical, rail, power generation, nuclear, aircraft, and automotive industries. The new edition includes a new chapter on IEC 61511, the process sector standard, published since the first edition. The text has been updated throughout in light of the authors’ recent experience and two case studies have been added. Dr. David J Smith, BSc, PhD, CEng, FIEE, HonFSaRS, FIQA, MIGasE, has been directly concerned with reliability, safety and software quality for 30 years. He has written a number of books on the subject as well as numerous papers. His PhD thesis was on the subject of reliability prediction accuracy and common cause failure. He chairs the IGasE panel which develops its guidelines on safety-related systems (now in its third edition). He has also made contributions to IEC 61508. Kenneth G. L. Simpson, MPhil, FIEE, FInstMC, MIGasE, has been associated with safety-related systems design and also with their assessment for 25 years. He is a member of the IEC 61508 drafting committee and also of the I Gas E panel which writes the gas industry guidance. Following a career in aerospace, Ken has spent 20 years in the control system industry and is a Director of Silvertech International plc, a leading designer of safety and control systems. He has written a number of papers on the topic and gives frequent talks.

Download or read book The Evaluation of Compliance with Federal Motor Vehicle Safety Standards written by Robert Brenner and published by . This book was released on 1967 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Risk Analysis XII written by S. Syngellakis and published by WIT Press. This book was released on 2020-08-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current events help to emphasise the importance of the analysis and management of risk to planners and researchers around the world. Natural hazards such as floods, earthquakes, landslides, fires and others have always affected human societies. The more recent emergence of the importance of man-made hazards is a consequence of the rapid technological advances made in the last few centuries. The interaction of natural and anthropogenic risks adds to the complexity of the problems. Presented at the 12th International Conference on Risk Analysis and Hazard Mitigation, the included research works cover a variety of topics related to risk analysis and hazard mitigation, associated with both natural and anthropogenic hazards.

Download or read book The Role of ISO 26262 written by Juan Pimentel and published by SAE International. This book was released on 2019-03-07 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety has been ranked as the number one concern for the acceptance and adoption of automated vehicles since safety has driven some of the most complex requirements in the development of self-driving vehicles. Recent fatal accidents involving self-driving vehicles have uncovered issues in the way some automated vehicle companies approach the design, testing, verification, and validation of their products. Traditionally, automotive safety follows functional safety concepts as detailed in the standard ISO 26262. However, automated driving safety goes beyond this standard and includes other safety concepts such as safety of the intended functionality (SOTIF) and multi-agent safety. The Role of ISO 26262 addresses the concept of safety for self-driving vehicles through the inclusion of 10 recent and highly relevent SAE technical papers. Topics that these papers feature include model-based systems engineering (MBSE) and the use of SysML language in a management-based approach to safety As the fourth title in a series on automated vehicle safety, this contains introductory content by the Editor with 10 SAE technical papers specifically chosen to illuminate the specific safety topic of that book.

Download or read book Automotive System Safety written by Joseph D. Miller and published by John Wiley & Sons. This book was released on 2019-12-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains practical insights into automotive system safety with a focus on corporate safety organization and safety management Functional Safety has become important and mandated in the automotive industry by inclusion of ISO 26262 in OEM requirements to suppliers. This unique and practical guide is geared toward helping small and large automotive companies, and the managers and engineers in those companies, improve automotive system safety. Based on the author’s experience within the field, it is a useful tool for marketing, sales, and business development professionals to understand and converse knowledgeably with customers and prospects. Automotive System Safety: Critical Considerations for Engineering and Effective Management teaches readers how to incorporate automotive system safety efficiently into an organization. Chapters cover: Safety Expectations for Consumers, OEMs, and Tier 1 Suppliers; System Safety vs. Functional Safety; Safety Audits and Assessments; Safety Culture; and Lifecycle Safety. Sections on Determining Risk; Risk Reduction; and Safety of the Intended Function are also presented. In addition, the book discusses causes of safety recalls; how to use metrics as differentiators to win business; criteria for a successful safety organization; and more. Discusses Safety of the Intended Function (SOTIF), with a chapter about an emerging standard (SOTIF, ISO PAS 21448), which is for handling the development of autonomous vehicles Helps safety managers, engineers, directors, and marketing professionals improve their knowledge of the process of FS standards Aimed at helping automotive companies—big and small—and their employees improve system safety Covers auditing and the use of metrics Automotive System Safety: Critical Considerations for Engineering and Effective Management is an excellent book for anyone who oversees the safety and development of automobiles. It will also benefit those who sell and market vehicles to prospective customers.

Download or read book Mems for Automotive and Aerospace Applications written by Michael Kraft and published by Elsevier. This book was released on 2013-01-02 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS for automotive and aerospace applications reviews the use of Micro-Electro-Mechanical-Systems (MEMS) in developing solutions to the unique challenges presented by the automotive and aerospace industries. Part one explores MEMS for a variety of automotive applications. The role of MEMS in passenger safety and comfort, sensors for automotive vehicle stability control applications and automotive tire pressure monitoring systems are considered, along with pressure and flow sensors for engine management, and RF MEMS for automotive radar sensors. Part two then goes on to explore MEMS for aerospace applications, including devices for active drag reduction in aerospace applications, inertial navigation and structural health monitoring systems, and thrusters for nano- and pico-satellites. A selection of case studies are used to explore MEMS for harsh environment sensors in aerospace applications, before the book concludes by considering the use of MEMS in space exploration and exploitation. With its distinguished editors and international team of expert contributors, MEMS for automotive and aerospace applications is a key tool for MEMS manufacturers and all scientists, engineers and academics working on MEMS and intelligent systems for transportation. Chapters consider the role of MEMS in a number of automotive applications, including passenger safety and comfort, vehicle stability and control MEMS for aerospace applications are also discussed, including active drag reduction, inertial navigation and structural health monitoring systems Presents a number of case studies exploring MEMS for harsh environment sensors in aerospace

Download or read book Functional safety of machine controls written by Hauke, M. and published by DGUV/IFA. This book was released on 2019-08-20 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EN ISO 13849-1 standard, “Safety of machinery – Safety-related parts of control systems”, contains provisions governing the design of such parts. This report is an update of BGIA Report 2/2008e of the same name. It describes the essential subject-matter of the standard in its third, revised 2015 edition, and explains its application with reference to numerous examples from the fields of electromechanics, fluidics, electronics and programmable electronics, including control systems employing mixed technologies. The standard is placed in its context of the essential safety requirements of the Machinery Directive, and possible methods for risk assessment are presented. Based upon this information, the report can be used to select the required Performance Level PLr for safety functions in control systems. The Performance Level PL which is actually attained is explained in detail. The requirements for attainment of the relevant Performance Level and its associated Categories, component reliability, levels of diagnostic coverage, software safety and measures for the prevention of systematic and common-cause failures are all discussed comprehensively. Background information is also provided on implementation of the requirements in real-case control systems. Numerous example circuits show, down to component level, how Performance Levels a to e can be engineered in the selected technologies with Categories B to 4. The examples provide information on the safety principles employed and on components with well-tried safety functionality. Numerous literature references permit closer study of the examples provided. The report shows how the requirements of EN ISO 13849-1 can be implemented in engineering practice, and thus makes a contribution to consistent application and interpretation of the standard at national and international level.

Download or read book Federal Motor Vehicle Safety Standards Electronic Stability Control Systems for Heavy Vehicles Us National Highway Traffic Safety Administration Regulation Nhtsa 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-11-14 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems for Heavy Vehicles (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems for Heavy Vehicles (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 This document establishes a new Federal Motor Vehicle Safety Standard No. 136 to require electronic stability control (ESC) systems on truck tractors and certain buses with a gross vehicle weight rating of greater than 11,793 kilograms (26,000 pounds). ESC systems in truck tractors and large buses are designed to reduce untripped rollovers and mitigate severe understeer or oversteer conditions that lead to loss of control by using automatic computer-controlled braking and reducing engine torque output. This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems for Heavy Vehicles (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section