Download or read book Natural Convective Heat Transfer from Short Inclined Cylinders written by Patrick H. Oosthuizen and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Convective Heat Transfer from Short Inclined Cylinders examines a heat transfer situation of significant, practical importance not adequately dealt with in existing textbooks or in any widely available review papers. Specifically, the book introduces the reader to recent studies of natural convection from short cylinders mounted on a flat insulated base where there is an “exposed” upper surface. The author considers the effects of the cylinder cross-sectional shape, the cylinder inclination angle, and the length-to-cross sectional size of the cylinder. Both numerical and experimental studies are discussed and correlation equations based on the results of these studies are reviewed. This book is ideal for professionals involved with thermal management and related systems, researchers, and graduate students in the field of natural convective heat transfer, instructors in graduate level courses in convective heat transfer.
Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-01-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and discusses experimental, theoretical and calculation approaches and industrial utilizations with modern ideas and methods to study heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, condensation, boiling, freezing, innovative experiments, measurement analysis, theoretical models and simulations, with many real-world problems and important modern applications. The book is divided in four sections : "Heat Transfer in Micro Systems", "Boiling, Freezing and Condensation Heat Transfer", "Heat Transfer and its Assessment", "Heat Transfer Calculations", and each section discusses a wide variety of techniques, methods and applications in accordance with the subjects. The combination of theoretical and experimental investigations with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students, who make use of experimental and theoretical investigations, assessment and enhancement techniques in this multidisciplinary field as well as to researchers in mathematical modelling, computer simulations and information sciences, who make use of experimental and theoretical investigations as a means of critical assessment of models and results derived from advanced numerical simulations and improvement of the developed models and numerical methods.
Download or read book Heat Transfer in Aerospace Applications written by Bengt Sundén and published by Academic Press. This book was released on 2016-10-19 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer in Aerospace Applications is the first book to provide an overall description of various heat transfer issues of relevance for aerospace applications. The book contains chapters relating to convection cooling, heat pipes, ablation, heat transfer at high velocity, low pressure and microgravity, aircraft heat exchangers, fuel cells, and cryogenic cooling systems. Chapters specific to low density heat transfer (4) and microgravity heat transfer (9) are newer subjects which have not been previously covered. The book takes a basic engineering approach by including correlations and examples that an engineer needs during the initial phases of vehicle design or to quickly analyze and solve a specific problem. Designed for mechanical, chemical, and aerospace engineers in research institutes, companies, and consulting firms, this book is an invaluable resource for the latest on aerospace heat transfer engineering and research. - Provides an overall description of heat transfer issues of relevance for aerospace applications - Discusses why thermal problems arise and introduces the various heat transfer modes - Helps solve the problem of selecting and calculating the cooling system, the heat exchanger, and heat protection - Features a collection of problems in which the methods presented in the book can be used to solve these problems
Download or read book Computational Fluid Dynamics and Heat Transfer written by Ryoichi Amano and published by WIT Press. This book was released on 2011 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer and fluid flow issues are of great significance and this state-of-the-art edited book with reference to new and innovative numerical methods will make a contribution for researchers in academia and research organizations, as well as industrial scientists and college students. The book provides comprehensive chapters on research and developments in emerging topics in computational methods, e.g., the finite volume method, finite element method as well as turbulent flow computational methods. Fundamentals of the numerical methods, comparison of various higher-order schemes for convection-diffusion terms, turbulence modeling, the pressure-velocity coupling, mesh generation and the handling of arbitrary geometries are presented. Results from engineering applications are provided. Chapters have been co-authored by eminent researchers.
Download or read book Advances in Heat Transfer and Thermal Engineering written by Chuang Wen and published by Springer Nature. This book was released on 2021-06-01 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the 16th UK Heat Transfer Conference (UKHTC2019), which is organised every two years under the aegis of the UK National Heat Transfer Committee. It is the premier forum in the UK for the local and international heat transfer community to meet, disseminate ongoing work, and discuss the latest advances in the heat transfer field. Given the range of topics discussed, these proceedings offer a valuable asset for engineering researchers and postgraduate students alike.
Download or read book Proceedings of the 7th International Conference on Discrete Element Methods written by Xikui Li and published by Springer. This book was released on 2016-12-01 with total page 1414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in Discrete Element Methods (DEM) and technology. It is the proceeding of 7th International Conference on DEM which was held at Dalian University of Technology on August 1 - 4, 2016. The subject of this book are the DEM and related computational techniques such as DDA, FEM/DEM, molecular dynamics, SPH, Meshless methods, etc., which are the main computational methods for modeling discontinua. In comparison to continua which have been already studied for a long time, the research of discontinua is relatively new, but increases dramatically in recent years and has already become an important field. This book will benefit researchers and scientists from the academic fields of physics, engineering and applied mathematics, as well as from industry and national laboratories who are interested in the DEM.
Download or read book Cavitation and Bubble Dynamics written by Phoevos Koukouvinis and published by Elsevier. This book was released on 2021-09-24 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation and Bubble Dynamics: Fundamentals and Applications examines the latest advances in the field of cavitation and multiphase flows, including associated effects such as material erosion and spray instabilities. This book tackles the challenges of cavitation hindrance in the industrial world, while also drawing on interdisciplinary research to inform academic audiences on the latest advances in the fundamentals. Contributions to the book come from a wide range of specialists in areas including fuel systems, hydropower, marine engineering, multiphase flows and computational fluid mechanics, allowing readers to discover novel interdisciplinary experimentation techniques and research results. This book will be an essential tool for industry professionals and researchers working on applications where cavitation hindrance affects reliability, noise, and vibrations. - Covers a wide range of cavitation and bubble dynamics phenomena, including shock wave emission, jetting, and luminescence - Provides the latest advice about applications including cavitation tunnels, cavitation testing, flow designs to avoid cavitation in pumps and other hydromachinery, and flow lines - Describes novel experimental techniques, such as x-ray imaging and new computational techniques
Download or read book Innovations in Army Energy and Power Materials Technologies written by Edward C. Shaffer and published by Materials Research Forum LLC. This book was released on 2018-09-20 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium reports fundamental science and engineering advances of the US Army Research Labratory (ARL) within the area of Energy and Power technologies. Although, in general, ARL's Materials Research encompasses a broad range of materials technologies (e.g.: Photonics, Electronics, Biological and Bio-inspired Materials, Structural Materials, High Strain and Ballistic Materials, and Manufacturing Science), this publication specifically addresses selected energy and power material related work at ARL. While this work includes electrochemical energy storage (batteries and capacitors) and electrochemical energy conversion (fuel cells, photoelectrochemistry, and photochemistry), special emphasis is given on electrochemical energy storage: • Micro Electro-Mechanical Systems (MEMS): Power density, efficiency, and robustness of motors, generators, and actuators while also reducing their life cycle costs. • Energy Storage: Electrical and electrochemical energy storage devices to decrease device size, weight, and cost as well as increase their capabilities in extreme temperatures and operating conditions. • Power Control and Distribution: Tactical, deployable power systems using conventional fuels, alternative fuels, and energy harvested from renewable/ambient sources. • Power Generation/Energy Conversion: Smart energy networks for platforms, forward operating bases, and facilities using modeling and simulation tools as well as new, greater capability and efficiency components. • Thermal Transport and Control: Heat and higher power density systems, advanced components, system modeling, and adaptive or hybrid-cycle technologies. Keywords: Electrochemical Energy Storage, Batteries, Capacitors, Electrochemical Energy Conversion, Fuel Cells, Photoelectrochemistry, Photochemistry, High Voltage Electrolytes, Li-ion Batteries, Li-ion Chemistry, Lithium–Sulphur Batteries, Nuclear Metastables, Pyroelectric Energy Conversion, Charged Quantum Dots, High-Efficiency Photovoltaics, IR Sensing, GaN Power Schottky Diodes, Threshold-Voltage Instability, Reliability Testing, SiC MOSFETs, Power Electronics Packaging, High Voltage 4H-SiC GTOs, Silicon Carbide, Avalanche Breakdown Diode, SiC PiN Diodes, Thyristor Protection, Compact DC-DC Battery Chargers
Download or read book Phase Change Materials for Heat Transfer written by Hafiz Muhammad Ali and published by Elsevier. This book was released on 2023-03-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Change Materials for Heat Transfer focuses on how to maximize the heat transfer rate and thermal storage capability of PCMs. Various aspects are covered, including preparation of phase change materials to heat transfer enhancement and characteristics with an emphasis on prominent applications. The book is designed in such a manner to cover the broad definitions, introduction, brief history, preparation techniques, thermophysical properties and heat transfer characteristics with mathematical models, performance-affecting factors and the applications and challenges of PCMs. This handbook will prove invaluable to readers interested in a resource with the latest information in this emerging field. - Provides key heat transfer enhancement and thermophysical properties features for a wide range of phase change materials - Presents detailed parameter selection procedures impacting heat transfer - Reviews available prediction methods for heat transfer and thermophysical properties of phase change material - Includes practical applications of phase change materials for enhanced thermal control - Explores practical challenges and opportunities of phase change materials potential in heat transfer enhancement
Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Butterworth-Heinemann. This book was released on 2013-10-25 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers with minichannel and microchannel flow passages are becoming increasingly popular due to their ability to remove large heat fluxes under single-phase and two-phase applications. Heat Transfer and Fluid Flow in Minichannels and Microchannels methodically covers gas, liquid, and electrokinetic flows, as well as flow boiling and condensation, in minichannel and microchannel applications. Examining biomedical applications as well, the book is an ideal reference for anyone involved in the design processes of microchannel flow passages in a heat exchanger. - Each chapter is accompanied by a real-life case study - New edition of the first book that solely deals with heat and fluid flow in minichannels and microchannels - Presents findings that are directly useful to designers; researchers can use the information in developing new models or identifying research needs
Download or read book Proceedings of International Conference on Thermofluids written by Shripad Revankar and published by Springer Nature. This book was released on 2020-11-21 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected and peer-reviewed proceedings of the International Conference on Thermofluids (KIIT Thermo 2020). It focuses on the latest studies and findings in the areas of fluid dynamics, heat transfer, thermodynamics, and combustion. Some of the topics covered in the book include electronic cooling, HVAC system analysis, inverse heat transfer, combustion, nano-fluids, multiphase flow, high-speed flow, and shock waves. The book includes both experimental and numerical studies along with a few review chapters from experienced researchers, and is expected to lead to new research in this important area. This book is of interest to students, researchers as well as practitioners working in the areas of fluid dynamics, thermodynamics, and combustion.
Download or read book Modeling and Analysis of Modern Fluid Problems written by Liancun Zheng and published by Academic Press. This book was released on 2017-04-26 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Analysis of Modern Fluids helps researchers solve physical problems observed in fluid dynamics and related fields, such as heat and mass transfer, boundary layer phenomena, and numerical heat transfer. These problems are characterized by nonlinearity and large system dimensionality, and 'exact' solutions are impossible to provide using the conventional mixture of theoretical and analytical analysis with purely numerical methods. To solve these complex problems, this work provides a toolkit of established and novel methods drawn from the literature across nonlinear approximation theory. It covers Padé approximation theory, embedded-parameters perturbation, Adomian decomposition, homotopy analysis, modified differential transformation, fractal theory, fractional calculus, fractional differential equations, as well as classical numerical techniques for solving nonlinear partial differential equations. In addition, 3D modeling and analysis are also covered in-depth. - Systematically describes powerful approximation methods to solve nonlinear equations in fluid problems - Includes novel developments in fractional order differential equations with fractal theory applied to fluids - Features new methods, including Homotypy Approximation, embedded-parameter perturbation, and 3D models and analysis
Download or read book Gas Turbine Heat Transfer and Cooling Technology written by Je-Chin Han and published by Taylor & Francis. This book was released on 2012-11-27 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, this second edition focuses on gas turbine heat transfer issues and their associated cooling technologies for aircraft and land-based gas turbines. It provides information on state-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling schemes. The book also offers updated experimental methods for gas turbine heat transfer and cooling research, as well as advanced computational models for gas turbine heat transfer and cooling performance predictions. The authors provide suggestions for future research within this technology and includes 800 illustrations to help clarify concepts and instruction.
Download or read book Electronics Cooling written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2016-06-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from the renowned researchers and academicians in the field, this book covers key conventional and emerging cooling techniques and coolants for electronics cooling. It includes following thematic topics: - Cooling approaches and coolants - Boiling and phase change-based technologies - Heat pipes-based cooling - Microchannels cooling systems - Heat loop cooling technology - Nanofluids as coolants - Theoretical development for the junction temperature of package chips. This book is intended to be a reference source and guide to researchers, engineers, postgraduate students, and academicians in the fields of thermal management and cooling technologies as well as for people in the electronics and semiconductors industries.
Download or read book Encyclopedia of Thermal Packaging Set 1 Thermal Packaging Techniques a 6 Volume Set written by Avram Bar-Cohen and published by World Scientific. This book was released on 2012-02-01 with total page 1582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging, the physical design and implementation of electronic systems is responsible for much of the progress in miniaturization, reliability and functional density achieved by the full range of electronic, microelectronic and nanoelectronic products during the past several decades. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal management on the critical path of nearly every organization dealing with traditional electronic product development, as well as emerging, product categories. Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of critical importance in the refinement of traditional products and in the development of products for new applications.The Encyclopedia of Thermal Packaging, compiled into four 5-volume sets (Thermal Packaging Techniques, Thermal Packaging Configurations, Thermal Packaging Tools and Thermal Packaging Applications), will provide comprehensive, one-stop treatment of the techniques, configurations, tools and applications of electronic thermal packaging. Each volume in a set comprises 250–350 pages and is written by world experts in thermal management of electronics.
Download or read book Advanced Flip Chip Packaging written by Ho-Ming Tong and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Flip Chip Packaging presents past, present and future advances and trends in areas such as substrate technology, material development, and assembly processes. Flip chip packaging is now in widespread use in computing, communications, consumer and automotive electronics, and the demand for flip chip technology is continuing to grow in order to meet the need for products that offer better performance, are smaller, and are environmentally sustainable.
Download or read book Thermal Management for Opto electronics Packaging and Applications written by Xiaobing Luo and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic guide to the theory, applications, and design of thermal management for LED packaging In Thermal Management for Opto-electronics Packaging and Applications, a team of distinguished engineers and researchers deliver an authoritative discussion of the fundamental theory and practical design required for LED product development. Readers will get a solid grounding in thermal management strategies and find up-to-date coverage of heat transfer fundamentals, thermal modeling, and thermal simulation and design. The authors explain cooling technologies and testing techniques that will help the reader evaluate device performance and accelerate the design and manufacturing cycle. In this all-inclusive guide to LED package thermal management, the book provides the latest advances in thermal engineering design and opto-electronic devices and systems. The book also includes: A thorough introduction to thermal conduction and solutions, including discussions of thermal resistance and high thermal conductivity materials Comprehensive explorations of thermal radiation and solutions, including angular- and spectra-regulation radiative cooling Practical discussions of thermally enhanced thermal interfacial materials (TIMs) Complete treatments of hybrid thermal management in downhole devices Perfect for engineers, researchers, and industry professionals in the fields of LED packaging and heat transfer, Thermal Management for Opto-electronics Packaging and Applications will also benefit advanced students focusing on the design of LED product design.
