Download or read book Approaches to Action Learning in Technical and Vocational Education and Training TVET written by Frank Bünning and published by . This book was released on 2007 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unleashing the potential written by Marope, P.T.M. and published by UNESCO Publishing. This book was released on 2015-05-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: "UNESCO has recently published the third volume of its Education on the Move series, a series dedicated to the analysis of key trends in education with the hope of inspiring dialogue among policy makers, educators and other key stakeholders on the challenges of education for tomorrow. The latest publication, entitled Unleashing the Potential: Transforming Technical and Vocational Education and Training is focused entirely on issues related to technical and vocational education and training (TVET). It takes stock of the steadily increasing demands and expectations on TVET systems around the globe and presents recent policy trends in the field of TVET. In their analysis, the authors provide insights into what it takes to unleash the potential of TVET systems around the world. They propose an integrated analytical approach that takes into consideration such factors as economic growth, social equity and issues related to sustainability so that TVET can contribute more effectively to contemporary policy issues such as youth unemployment, gender disparities and climate change. Overall, the book calls for a transformation of TVET systems to enable them to respond to the demands of their contexts. This transformation should enable TVET systems to acquire agility to stay current and responsive to the rapidly changing demands of the twenty-first century."--Publisher's website.
Download or read book Tomorrow s Learning Involving Everyone Learning with and about Technologies and Computing written by Arthur Tatnall and published by Springer. This book was released on 2018-01-25 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 11th IFIP TC 3 World Conference on Computers in Education, WCCE 2017, held in Dublin, Ireland, in July 2017. The 57 revised full papers and 10 short papers were carefully reviewed and selected from 116 submissions during two rounds of reviewing and improvement. The papers are organized in the following topical sections: futures of technology for learning and education; innovative practices with learning technologies; and computer science education and its future focus and development. Also included is "The Dublin Declaration" which identifies key aspects of innovation, development successes, concerns and interests in relation to ICT and education.
Download or read book Vocational Learning written by Ralph Catts and published by Springer Science & Business Media. This book was released on 2011-08-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective knowing and learning for vocational purposes must take account of the wide range of variables that impact on knowledge formation and that promote learning. In light of those many variables, the formal sector of technical and vocational education and training (TVET) must constantly ask itself what it could and should do to better provide vocational learning for those people likely to pursue learning via the informal sector. This book addresses that question. Vocational Learning: Innovative Theory and Practice discusses four theoretical aspects of vocational learning that support understanding of vocational learning processes and practices: the situations of vocational learning; the power and roles of social networks and identity in vocational learning; knowing and knowledge management processes; and the implications for pedagogic practices in both informal and formal TVET systems. The book provides an overview of a series of international examples of innovative approaches to vocational educational theory and practice, and it draws on empirical research to analyze the effects of those approaches. It includes unique insights into aspects of TVET for Indigenous peoples. With a discussion of policy implications for Europe, North America and Australia, this book is an instrumental tool to understand the underlying factors that generate effective educational and workforce outcomes through effective formal and informal learning.
Download or read book Handbook of Technical and Vocational Education and Training Research written by Felix Rauner and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 1103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical and vocational education and training (TVET) research has become a recognized and well-defined area of interdisciplinary research. This is the first handbook of its kind that specifically concentrates on research and research methods in TVET. The book’s sections focus on particular aspects of the field, starting with a presentation of the genesis of TVET research. They further feature research in relation to policy, planning and practice. Various areas of TVET research are covered, including on the vocational disciplines and on TVET systems. Case studies illustrate different approaches to TVET research, and the final section of the book presents research methods, including interview and observation methods, as well as of experimentation and development. This handbook provides a comprehensive coverage of TVET research in an international context, and, with special focus on research and research methods, it is a cutting-edge resource and reference.
Download or read book International Handbook of Education for the Changing World of Work written by Rupert Maclean and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 3162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This six-volume handbook covers the latest practice in technical and vocational education and training (TVET). It presents TVET models from all over the world, reflections on the best and most innovative practice, and dozens of telling case studies. The handbook presents the work of established as well as the most promising young researchers and features unrivalled coverage of developments in research, policy and practice in TVET.
Download or read book Vocationalisation of Secondary Education Revisited written by Jon Lauglo and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a cutting-edge contribution to the debate which has occurred for some time on the pros and cons of secondary education becoming more closely and explicitly related to preparing young people for the world of work. The book provides concrete examples of the vocationalisation of secondary education, with particular reference to the situation in Africa. The target audience for the book includes policy-makers, practitioners, administrators, education planners, researchers, teachers and teacher educators with a concern about the relationship between secondary education and education for the world of work (with particular reference to technical and vocational education and training - TVET.) The book appears in the Springer book series on ‘Technical and Vocational Education and Training: Issues, Concerns and Prospects’ and compliments the ‘International Handbook of Technical and Vocational Education and Training’ and other publications in the’ International Library of TVET’ all of which are publications of the ‘UNESCO-UNEVOC International Centre for TVET’ in Bonn, Germany
Download or read book Understanding Work Based Learning written by Dr John Mumford and published by Gower Publishing, Ltd.. This book was released on 2012-10-01 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book is for anyone who wants to make the most of work-based learning: employees, employers, educationalists, policy makers and researchers. It sheds light on ways of giving full-time employees the chance to take up learning opportunities which are of the same level and rigour as those on offer to the full time student. It approaches the subject from the perspective of the learner, drawing on case studies to provide detailed insight. It suggests that universities already have in place much of the machinery needed to support learners who are in work: they just don't make enough use of it. Look closely and you will find a substantial legacy of this kind of activity by universities. This is a book about seizing opportunities. In one volume, Understanding Work-Based Learning makes a valuable contribution to current employer engagement and learner demand debates, and provides first hand learner experiences to guide existing and potential work based learners, employers, educationalists, policy makers, and researchers.
Download or read book Proceedings of the 21st Congress of the International Ergonomics Association IEA 2021 written by Nancy L. Black and published by Springer Nature. This book was released on 2021-05-04 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), held online on June 13-18, 2021. By highlighting the latest theories and models, as well as cutting-edge technologies and applications, and by combining findings from a range of disciplines including engineering, design, robotics, healthcare, management, computer science, human biology and behavioral science, it provides researchers and practitioners alike with a comprehensive, timely guide on human factors and ergonomics. It also offers an excellent source of innovative ideas to stimulate future discussions and developments aimed at applying knowledge and techniques to optimize system performance, while at the same time promoting the health, safety and wellbeing of individuals. The proceedings include papers from researchers and practitioners, scientists and physicians, institutional leaders, managers and policy makers that contribute to constructing the Human Factors and Ergonomics approach across a variety of methodologies, domains and productive sectors. This volume includes papers addressing the following topics: Ergonomics in Design for All, Human Factors and Sustainable Development, Gender and Work, Slips Trips and Falls, Visual Ergonomics, Ergonomics for children and Educational Environments, Ageing and Work.
Download or read book Greening technical and vocational education and training written by UNESCO and published by UNESCO Publishing. This book was released on 2017-10-23 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical and Vocational Education and Training written by Stephen Gough and published by A&C Black. This book was released on 2011-11-03 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vocational education is central to the plans of policy makers around the world; it underpins the development of the poorest economies, and the continued competitiveness of the richest. Technical and Vocational Education and Training debates the key issues:* How far can the same principles be applied to vocational learning in universities, colleges, schools and the workplace?* Do the needs of learners and the needs of the economy always coincide? Should teachers focus on the delivery of skills or the development of cultures?* What will determine whether what is learnt corresponds to what is taught?* Who are the stakeholders in vocational learning, and can they all be satisfied at once?* What does it really mean to say that vocational provision is a kind of investment?Drawing on contemporary, internationally-significant case studies in water education, management education and education for sustainable development along with UNESCO's International Centre for Technical and Vocational Education and Training, Gough provides a challenging discussion.
Download or read book Powering a Learning Society During an Age of Disruption written by Sungsup Ra and published by Springer Nature. This book was released on 2021-05-22 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents contemporary perspectives on the role of a learning society from the lens of leading practitioners, experts from universities, governments, and industry leaders. The think pieces argue for a learning society as a major driver of change with far-reaching influence on learning to serve the needs of economies and societies. The book is a testimonial to the importance of ‘learning communities.’ It highlights the pivotal role that can be played by non-traditional actors such as city and urban planners, citizens, transport professionals, and technology companies. This collection seeks to contribute to the discourse on strengthening the fabric of a learning society crucial for future economic and social development, particularly in the aftermath of the coronavirus disease.
Download or read book Vocational Education and Training in Times of Economic Crisis written by Matthias Pilz and published by Springer. This book was released on 2016-12-20 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a broad range of approaches and methodologies relevant to international comparative vocational education and training (VET). Revealing how youth in transition is affected by economic crises, it provides essential insights into the strengths and weaknesses of the various systems and prospects of VET in contexts ranging from North America to Europe, (e.g. Spain, Germany or the UK) to Asia (such as China, Thailand and India). Though each country examined in this volume is affected by the economic crisis in a different way, the effects are especially apparent for the young generation. In many countries the youth unemployment rate is still very high and the job perspectives for young people are often limited at best. The contributions in this volume demonstrate that VET alone cannot solve these problems, but can be used to support a smooth transition from school to work. If the quality of VET is high and the status and job expectations are good, VET can help to fill the skills gap, especially at the intermediate skill level. Furthermore, VET can also offer a realistic alternative to the university track for young people in many countries.
Download or read book Technical and Vocational Education and Training in Tajikistan and Other Countries in Central Asia written by Eiko Kanzaki Izawa and published by Asian Development Bank. This book was released on 2021-03-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tajikistan and other countries in Central Asia, such as Kazakhstan, the Kyrgyz Republic, Turkmenistan, and Uzbekistan, are striving to align technical and vocational education and training (TVET) with their economic realities. Job shortage and the gap between TVET and the needs of employers must be addressed by these countries. This publication details how TVET has evolved in Tajikistan and other countries in the region. It recommends improvements through the use of a labor market information system to match skills supply with industry demand, decentralization of governance and management, integration of information and communication technology for lifelong learning, and intensified regional collaboration and experience sharing.
Download or read book Regionalization and Harmonization in TVET written by Ade Gafar Abdullah and published by Routledge. This book was released on 2017-08-07 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regionalization and Harmonization in TVET contains the papers presented at the 4th UPI International Conference on Technical and Vocational Education and Training (TVET 2016, Bandung, Indonesia, 15-16 November 2016). 1. Standardization in Regionalization and Harmonization 2. Skill and Personal Development 3. Social and Cultural Issues 4. Teaching Innovations in TVET 5. Innovations in Engineering and Education.
Download or read book Technical Education and Vocational Training in Developing Nations written by Okolie, Ugochukwu Chinonso and published by IGI Global. This book was released on 2017-01-31 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Severe economic depression and the difficulty to acquire employment with adequate income have significant impact on a nation’s social welfare. The need to provide ample educational opportunities is more imperative than ever, particularly in emerging economies. Technical Education and Vocational Training in Developing Nations is a comprehensive reference source for the latest literature on optimizing the implementation of curriculum development and instructional design strategies for technical and vocational education. Featuring innovative coverage across a range of relevant topics, such as curriculum deficiency, teacher competencies, and accessible learning, this book is ideally designed for policy makers, academicians, researchers, advanced-level students, technology developers, and educators interested in the improvement of professional learning programs.
Download or read book Entrepreneurial learning for TVET institutions written by Lindner, Johannes and published by UNESCO Publishing. This book was released on 2020-12-31 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
