Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1970 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Career Opportunities in the Energy Industry written by Allan Taylor and published by Infobase Publishing. This book was released on 2008 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents one hundred and thirty job descriptions for careers within the energy industry, and includes positions dealing with coal, electric, nuclear energy, renewable energy, engineering, machine operation, science, and others.
Download or read book Applied Mechanics Behavior of Materials and Engineering Systems written by Taoufik Boukharouba and published by Springer. This book was released on 2016-08-31 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in mechanics, with a special emphasis on material mechanics. It reports on fracture mechanics, fatigue of materials, stress-strain behaviours, as well as transferability problems and constraint effects in fracture mechanics. It covers different kind of materials, from metallic materials such as ferritic and austenitic steels, to composites, concrete, polymers and nanomaterials. Additional topics include heat transfer, quality control and reliability of structures and components. Furthermore, the book gives particular attention to new welding technologies such as STIR welding and spray metal coating, and to novel methods for quality control, such as Taguchi design, fault diagnosis and wavelet analysis. Based on the 2015 edition of the Algerian Congress of Mechanics (Congrès Algérien de Mécanique, CAM), the book also covers energetics, in terms of simulation of turbulent reactive flow, behaviour of supersonic jet, turbulent combustion, fire induced smoke layer, and heat and mass transfer, as well as important concepts related to human reliability and safety of components and structures. All in all, the book represents a complete, practice-oriented reference guide for both academic and professionals in the field of mechanics.
Download or read book Proceedings of the 2nd Energy Security and Chemical Engineering Congress written by Nasrul Hadi Johari and published by Springer Nature. This book was released on 2022-09-21 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected articles presented at the 2nd Energy Security and Chemical Engineering Congress (ESChE 2021). This collection of proceedings presents the key challenges and trends related to mechanical as well as materials engineering and technology in setting the stage for promoting the sustainable technological solution for the better world. The book discusses recent explorations and findings with regard to mechanical and materials, specifically the thermal engineering and renewable energy areas that are very relevant toward the establishment of sustainable technological solutions. This book benefits academic researchers and industrial practitioners in the field of renewable energy and material engineering for energy applications.
Download or read book Hearings Reports and Prints of the House Committee on Appropriations written by United States. Congress. House. Committee on Appropriations and published by . This book was released on 1972 with total page 1978 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HUD space science veterans Appropriations for 1974 written by United States. Congress. House. Committee on Appropriations. Subcommittee on HUD-Space-Science-Veterans and published by . This book was released on 1973 with total page 1444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report of the Commissioners on Agricultural Commercial Industrial and Other Forms of Technical Education written by New South Wales. Commission on Primary, Secondary, Technical, and Other Branches of Education and published by . This book was released on 1905 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Report for Fiscal Year written by National Science Foundation (U.S.) and published by . This book was released on 1981 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental and Applied Mechanics Volume 4 written by Carlos E. Ventura and published by Springer Science & Business Media. This book was released on 2012-11-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on: Fracture & Fatigue Microscale & Microstructural Effects in Fatigue & Fracture Material Applications Composite Characterization Using Digital Image Correlation Techniques Multi-Scale Simulation and Testing of Composites Residual Stress Inverse Problems/Hybrid Methods Nano-Composites Microstructure Material Characterization Modeling and Uncertainty Quantification Impact Behavior of Composites
Download or read book Technology Strategy for Metal based Additive Manufacturing written by Marc Matthias Schneck and published by utzverlag GmbH. This book was released on 2022-01-14 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechatronics And Manufacturing Technologies Proceedings Of The International Conference Mmt 2016 written by Poki Chen and published by World Scientific. This book was released on 2017-06-02 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held in Wuhan of China from August 20-21, 2016, the 2016 International Conference on Mechatronics and Manufacturing Technologies (MMT2016) provides an excellent international academic forum for all the researchers and practitioners to share resources, exchange opinions and inspire studying.The conference enjoys a wide spread participation among all over the universities and research institutes. It provides a broad overview of the latest research results on related fields and also a significant platform for academic connection and exchange.MMT2016 proceedings collects together 96 articles, after peer-review, to report on state-of-art developments of mechanical engineering based on originality, significance and clarity for the purpose of the Conference.
Download or read book D R D A Reporter written by and published by UM Libraries. This book was released on 1989 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Technology Trends in Industrial and Business Management written by Dagmar Cagáňová and published by Springer. This book was released on 2019-02-15 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current developments in smart city research and application regarding the management of manufacturing systems, Industry 4.0, transportation, and business management. It suggests approaches to incorporating smart city innovations into manufacturing systems, with an eye towards competitiveness in a global environment. The same pro-innovative approach is then applied to business and cooperation management. The authors also present smart city transportation solutions including vehicle data processing/reporting system, mobile application for fleet managers, bus drivers, bus passengers and special applications for smart city buses like passenger counting system, IP cameras, GPS system etc. The goal of the book is to establish channels of communication and disseminate knowledge among researchers and professionals working on smart city research and application. Features contributions on a variety of topics related to smart cities from global researchers and professionals in a wide range of sectors; Presents topics relating to smart cities such as manufacturing, business, and transportation; Includes expanded selected papers from EAI International Conference on Management of Manufacturing Systems (MMS 2016), EAI Industry of Things and Future Technologies Conference – Mobility IoT 2016 and International Conference on Smart Electric Vehicles and Vehicular Ad-hoc NETworks (SEVNET).
Download or read book Mechanics of Pre industrial Technology written by Brian Cotterell and published by Cambridge University Press. This book was released on 1990 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: First general account of the mechanics behind pre-industrial technology, combining the skills of an engineer and an archaeologist.
Download or read book Proceedings of the 6th International Conference on Industrial Engineering ICIE 2020 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2021-03-31 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Advanced Manufacturing Technologies written by Kapil Gupta and published by Springer. This book was released on 2017-04-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.