Download or read book Diesel Engine Transient Operation written by Constantine D. Rakopoulos and published by Springer Science & Business Media. This book was released on 2009-03-10 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.

Download or read book Turbocharging the Internal Combustion Engine written by Neil Watson and published by . This book was released on 1982 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Engineering written by and published by . This book was released on 1979-06 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book S A E Transactions written by Society of Automotive Engineers and published by . This book was released on 1982 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning in 1985, one section is devoted to a special topic

Download or read book Concepts in Turbocharging for Improved Efficiency and Emissions Reduction written by Mehrdad Zangeneh and published by SAE International. This book was released on 2014-09-22 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legislative requirements to reduce CO2 emissions by 2020 have resulted in significant efforts by car manufacturers to explore various methods of pollution abatement. One of the most effective ways found so far is by shortening the cylinder stroke and downsizing the engine. This new engine then needs to be boosted, or turbocharged, to create the full and original load torque. Turbocharging has been and will continue to be a key component to the new technologies that will make a positive difference in the next-generation engines of years to come. Concepts in Turbocharging for Improved Efficiency and Emissions Reduction explores the many ways that turbocharging will deliver concrete results in meeting the new realities of sustainable, green transportation. This collection of very focused technical papers, selected by Mehrdad Zangeneh, PhD., a professor of thermo-fluids at University College in London, provides an assessment of several novel designs intended to improve fuel consumption and cap emissions, while maintaining torque at all speeds. The book is divided into four sections, each addressing the most cutting-edge technologies on the market today: o Two-Stage Turbocharging o Variable Geometry Compressors o Unconventional Compressor Configurations o Electrically Assisted Turbocharging

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Combustion and flow diagnostics written by SAE. and published by . This book was released on 2006 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbochargers and Turbocharging written by Evangelos G. Giakoumis and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercharging has long been established as the most successful means to maximise power output from a specific engine size. Through supercharging, the inlet air density is increased, usually by means of a compressor, and by doing so the amount of air trapped in the cylinders is increased accordingly. As a result, efficient burning of a proportionately higher amount of fuel is enabled. By far, the most successful version of supercharging is turbocharging. Here, the expansion in a turbine of the exhaust gases leaving the cylinders supplies the power needed to drive the compressor. At the moment, practically all diesel engines are turbocharged, with a continuously increasing penetration in the highly competitive market of SI-powered vehicles. The current book on turbochargers and turbocharging, comprising fifteen chapters, gathers important and novel research on many modern aspects of turbocharging for all kinds of gasoline and diesel-powered engine applications (automotive, truck, marine and aircraft). For example, characterisation of the value proposition of turbocharged vehicles, marine engines turbo-compounding, fundamental issues of turbocharger lag and its relation with engine-out PM emissions, variable geometric compressors, automotive two-stage turbocharging, and dynamic operation of turbochargers including VGT and surging effects are amongst the topics analysed. Review papers form a very important part of the book, namely the discussion and in-depth analysis of various automotive boosting systems, turbocharger reduced-order modeling, heat transfer and pulsating flows in turbomachinery, mathematical models for turbocharged engines, and turbomachine-based engine throttling. A considerable portion of the book (seven chapters) deals with control-oriented modeling techniques relating to the turbocharger and/or the whole engine power-plant. Such models have proven valuable during the design of both turbochargers and turbocharged engines, and are described and discussed in detail for a variety of automotive and aircraft applications. The book is written for post-graduate students, engineers and researchers in the field of internal combustion engines (diesel and SI) and turbochargers.

Download or read book 14th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2020-09-30 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: 14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.

Download or read book Proceedings of the 6th International Conference on Industrial Engineering ICIE 2020 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2021-03-31 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Highway Safety Literature written by and published by . This book was released on 1980 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Download or read book The Best of COMVEC 2016 Select Technical Papers from the SAE Commercial Vehicle Engineering Congress written by Kevin Jost and published by SAE International. This book was released on 2016-09-24 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection highlights some of the best technical papers that represent the breadth of the entire technical program. Leading industry perspectives are reflected by the corporate contributions that are included in this group, along with a specific focus on connectivity, the theme of the 2016 event. The commercial vehicle industry has always been focused on improving efficiency. These ten characteristic offerings present cutting-edge trends, technologies, and solutions that provide greater benefit and the application of knowledge to solve problems and guide future innovation. These studies are presented by experts from industrial, governmental, and academic partners on topics that include: • Autonomous commercial vehicles • Computational fluid dynamics and aerodynamics for heavy-duty, on-road applications • Fuel and emissions efficiency of medium-duty powertrain configurations • Intelligently controlled air-suspension systems • Improving total cost of ownership by gains in thermal efficiency • New simulation and testing techniques enabling next generation commercial vehicle technology The leadership team has focused on bringing in a broad mixture of participants to COMVEC to discuss current technologies and the future challenges of the commercial vehicle industry. This first of its kind special publication draws on the strength of the event’s program and features ten of the best technical papers from the SAE International Congress.

Download or read book Indexes to Publications written by American Society of Mechanical Engineers and published by . This book was released on 1981 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains indexes to all ASME papers and publications. Periodical indexed are : Mechanical engineering, Journal of engineering for power, Journal of engineering for industry, Journal of heat transfer, Journal of basic engineering, Journal of applied mechanics, Journal of lubrication technology, Applied mechanics reviews, Mechanical Engineers' and product directory.

Download or read book Highway Safety Literature written by and published by . This book was released on 1985 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 150 and 300 KW Lightweight Diesel Aircraft Engine Study written by Alex P. Brouwers and published by . This book was released on 1980 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 15th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2023-05-05 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institution’s International Conference on Turbochargers and Turbocharging (Twickenham, London, UK, 16-17 May 2023) returns to address the latest advances, research and developments in turbocharging system designs and boosting solutions. This volume presents a peer-reviewed collection of papers which will address current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The latest developments leading to enhanced performance and efficiency, increased durability and reduced emissions in line with meeting Net-Zero and global emissions targets. Topics include: Air management in powertrains: conventional, hybrids, fuel cells and novel configurations Alternate fuels and their needs in boosting (e.g. hydrogen, synthetic fuels) Electrification of turbochargers, compressors, and exhaust turbines Simulation and testing techniques, data analytics, including AI and digital twins Thermal management, waste heat recovery and expanders Turbomachinery aerodynamic: novel compressors & turbines and multi-stage systems. Component fatigue life, bearing design, rotor-dynamics and durability prediction Mechatronics, control, sensors and power electronics High speed turbomachinery in propulsion and power systems Future Legislation needs for thermal propulsion systems