Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Current Advances in Mechanical Design and Production VII written by M.F. Hassan and published by Elsevier. This book was released on 2000-01-31 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Mechanical Design and Production has over the years established itself as an excellent forum for the exchange of ideas in these established fields. The first of these conferences was held in 1979. The seventh, and most recent, conference in the series was held in Cairo during February 15-17, 2000. International engineers and scientists gathered to exchange experiences and highlight the state-of-the-art research in the fields of mechanical design and production. In addition a heavy emphasis was placed on the issue of technology transfer. Over 100 papers were accepted for presentation at the conference. Current Advances in Mechanical Design & Production VII does not, however, attempt to publish the complete work presented but instead offers a sample that represents the quality and breadth of both the work and the conference. Ten invited papers and 54 ordinary papers have been selected for inclusion in these proceedings. They cover a range of basic and applied topics that can be classified into six main categories: System Dynamics, Solid Mechanics, Material Science, Manufacturing Processes, Design and Tribology, and Industrial Engineering and its Applications.

Download or read book Advances In Dynamics Instrumentation And Control Volume Ii Proceedings Of The 2006 International Conference Cdic 06 written by Chun-yi Su and published by World Scientific. This book was released on 2007-07-05 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume is a compilation of 43 articles representing the scientific and technical advances in various aspects of system dynamics, instrumentation, measurement techniques, simulation and controls, which would serve as an important resource in the field. The articles represent state-of-the-art contributions in the fields of dynamics and control of nonlinear, hybrid and stochastic systems; nonlinear control theory; and adaptive, model predictive and real-time controls with applications involving fault diagnostics, manufacturing systems, vehicular dynamics, simulator designs, smart actuators, etc.

Download or read book Proceedings of the ASME Design Engineering Division written by and published by American Society of Mechanical Engineers. This book was released on 2007 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Journal of Vehicle Design written by and published by . This book was released on 1998 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Conference on Mechanism Science and Control Engineering MSCE 2014 written by and published by DEStech Publications, Inc. This book was released on 2014-09-02 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of MSCE 2014 is to provide a platform for researchers, engineers, and academicians, as well as industrial professionals, to present their research results and development activities in mechanism science and control engineering. It provides opportunities for the delegates to exchange new ideas and application experiences, to establish business or research relations and to find global partners for future collaboration. MSCE2014 is conducted to all the researchers, engineers, industrial professionals and academicians, who are broadly welcomed to present their latest research results, academic developments or theory practice. Topics of interest include but are not limited to Mechanism theory and Application, Mechanical control and Automation Engineering, Mechanical Dynamics, Materials Processing and Control, Instruments and Vibration Control. It is of great pleasure to see the delegates exchanging ideas and establishing sound relationships on the conference.

Download or read book High Speed Off Road Vehicles written by Bruce Maclaurin and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise reference that provides an overview of the design of high speed off-road vehicles High Speed Off-Road Vehicles is an excellent, in-depth review of vehicle performance in off-road conditions with a focus on key elements of the running gear systems of vehicles. In particular, elements such as suspension systems, wheels, tyres, and tracks are addressed in-depth. It is a well-written text that provides a pragmatic discussion of off-road vehicles from both a historical and analytical perspective. Some of the unique topics addressed in this book include link and flexible tracks, ride performance of tracked vehicles, and active and semi-active suspension systems for both armoured and unarmoured vehicles. The book provides spreadsheet-based analytic approaches to model these topic areas giving insight into steering, handling, and overall performance of both tracked and wheeled systems. The author further extends these analyses to soft soil scenarios and thoroughly addresses rollover situations. The text also provides some insight into more advanced articulated systems. High Speed Off-Road Vehicles: Suspensions, Tracks, Wheels and Dynamics provides valuable coverage of: Tracked and wheeled vehicles Suspension component design and characteristics, vehicle ride performance, link track component design and characteristics, flexible track, and testing of active suspension test vehicles General vehicle configurations for combat and logistic vehicles, suspension performance modelling and measurement, steering performance, and the effects of limited slip differentials on the soft soil traction and steering behavior of vehicles Written from a very practical perspective, and based on the author’s extensive experience, High Speed Off-Road Vehicles provides an excellent introduction to off-road vehicles and will be a helpful reference text for those practicing design and analysis of such systems.

Download or read book Vehicle Dynamics written by Reza N. Jazar and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is appropriate for senior undergraduate and first year graduate students in mechanical and automotive engineering. The contents in this book are presented at a theoretical-practical level. It explains vehicle dynamics concepts in detail, concentrating on their practical use. Related theorems and formal proofs are provided, as are real-life applications. Students, researchers and practicing engineers alike will appreciate the user-friendly presentation of a wealth of topics, most notably steering, handling, ride, and related components. This book also: Illustrates all key concepts with examples Includes exercises for each chapter Covers front, rear, and four wheel steering systems, as well as the advantages and disadvantages of different steering schemes Includes an emphasis on design throughout the text, which provides a practical, hands-on approach

Download or read book Advances in Engineering Research and Application written by Duy Cuong Nguyen and published by Springer Nature. This book was released on 2022-12-01 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Engineering Research and Applications (ICERA 2022), held on December 1-2, 2022, at Thai Nguyen University of Technology in Thai Nguyen, Vietnam, provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micro mechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the Proceedings of ICERA 2022, Advances in Engineering Research and Application, assists academics and professionals alike to reshape their thinking on sustainable development.

Download or read book Vehicle Suspension System Technology and Design written by Avesta Goodarzi and published by Springer Nature. This book was released on 2023-02-13 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the procedures of developing an adaptive suspension system with examples. This book gives a thorough introduction to air suspension systems, which contain height leveling systems, electronic control systems, design fundamentals, performance superiority, etc. This book encompasses all essential aspects of suspension systems and provides an easy approach to their understanding and design. Provides a step-by-step approach using pictures, graphs, tables, and examples so that the reader may easily grasp difficult concepts. This book defines and examines suspension mechanisms and their geometrical features. Suspension motions and ride models are derived for the study of vehicle ride comfort. Analysis of suspension design factors and component sizing along with air suspension systems and their functionalities are reviewed.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1984 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Autonomous Vehicle Design for Severe Environments written by V.V. Vantsevich and published by IOS Press. This book was released on 2015-10-20 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical vehicle dynamics, which is the basis for manned ground vehicle design, has exhausted its potential for providing novel design concepts to a large degree. At the same time, unmanned ground vehicle (UGV) dynamics is still in its infancy and is currently being developed using general analytical dynamics principles with very little input from actual vehicle dynamics theory. This technical book presents outcomes from the NATO Advanced Study Institute (ASI) ‘Advanced Autonomous Vehicle Design for Severe Environments’, held in Coventry, UK, in July 2014. The ASI provided a platform for world class professionals to meet and discuss leading-edge research, engineering accomplishments and future trends in manned and unmanned ground vehicle dynamics, terrain mobility and energy efficiency. The outcomes of this collective effort serve as an analytical foundation for autonomous vehicle design. Topics covered include: historical aspects, pivotal accomplishments and the analysis of future trends in on- and off-road manned and unmanned vehicle dynamics; terramechanics, soil dynamic characteristics, uncertainties and stochastic characteristics of vehicle-environment interaction for agile vehicle dynamics modeling; new methods and techniques in on-line control and learning for vehicle autonomy; fundamentals of agility and severe environments; mechatronics and cyber-physics issues of agile vehicle dynamics to design for control, energy harvesting and cyber security; and case studies of agile and inverse vehicle dynamics and vehicle systems design, including optimisation of suspension and driveline systems. The book targets graduate students, who desire to advance further in leading-edge vehicle dynamics topics in manned and unmanned ground vehicles, PhD students continuing their research work and building advanced curricula in academia and industry, and researchers in government agencies and private companies.

Download or read book Off road Vehicle Dynamics written by Hamid Taghavifar and published by Springer. This book was released on 2016-07-27 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis of off-road vehicle dynamics from kinetics and kinematics perspectives and the performance of vehicle traversing over rough and irregular terrain. The authors consider the wheel performance, soil-tire interactions and their interface, tractive performance of the vehicle, ride comfort, stability over maneuvering, transient and steady state conditions of the vehicle traversing, modeling the aforementioned aspects and optimization from energetic and vehicle mobility perspectives. This book brings novel figures for the transient dynamics and original wheel terrain dynamics at on-the-go condition.

Download or read book Hydropneumatic Suspension Systems written by Wolfgang Bauer and published by Springer Nature. This book was released on 2021-09-30 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydropneumatic suspension systems combine the excellent properties of gas springs with the favourable damping properties of hydraulic fluids. The advantages of these systems are particularly appropriate for mobile applications, such as agricultural and construction equipment as well as passenger cars, trucks and busses. Based on his 20 years of experience with this technology, Dr. Bauer provides in this book an extensive overview of hydropneumatic suspension systems. Starting with a comparison of different types of suspension systems, the author subsequently describes the theoretical background associated with spring and damping characteristics of hydropneumatic systems. Furthermore, he explains the design of the most important system components and gives an overview of level control systems, various special functions, patents and design examples. Finally, an outlook for future hydropneumatic suspension systems is discussed. Compared to the first edition, this new edition puts an additional focus on damping functions as well as applications / projects and contains various additional details such as proportional valves, all-wheel suspension or dediated power supply. Furthermore, suspension testing has been added as a new chapter.

Download or read book Semi active Suspension Control written by Emanuele Guglielmino and published by Springer Science & Business Media. This book was released on 2008-05-27 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-active Suspension Control provides an overview of vehicle ride control employing smart semi-active damping systems. These systems are able to tune the amount of damping in response to measured vehicle-ride and handling indicators. Two physically different dampers (magnetorheological and controlled-friction) are analysed from the perspectives of mechatronics and control. Ride comfort, road holding, road damage and human-body modelling are studied. Mathematical modelling is balanced by a large and detailed section on experimental implementation, where a variety of automotive applications are described offering a well-rounded view. The implementation of control algorithms with regard to real-life engineering constraints is emphasised. The applications described include semi-active suspensions for a saloon car, seat suspensions for vehicles not equipped with a primary suspension, and control of heavy-vehicle dynamic-tyre loads to reduce road damage and improve handling.

Download or read book Innovative Product Design and Intelligent Manufacturing Systems written by BBVL. Deepak and published by Springer Nature. This book was released on 2020-03-13 with total page 1049 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected research articles from the International Conference on Innovative Product Design and Intelligent Manufacturing System (ICIPDIMS 2019), held at the National Institute of Technology, Rourkela, India. The book discusses latest methods and advanced tools from different areas of design and manufacturing technology. The main topics covered include design methodologies, industry 4.0, smart manufacturing, and advances in robotics among others. The contents of this book are useful for academics as well as professionals working in industrial design, mechatronics, robotics, and automation.

Download or read book Vehicle Dynamics and Control written by Rajesh Rajamani and published by Springer Science & Business Media. This book was released on 2011-12-21 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Dynamics and Control provides a comprehensive coverage of vehicle control systems and the dynamic models used in the development of these control systems. The control system applications covered in the book include cruise control, adaptive cruise control, ABS, automated lane keeping, automated highway systems, yaw stability control, engine control, passive, active and semi-active suspensions, tire-road friction coefficient estimation, rollover prevention, and hybrid electric vehicles. In developing the dynamic model for each application, an effort is made to both keep the model simple enough for control system design but at the same time rich enough to capture the essential features of the dynamics. A special effort has been made to explain the several different tire models commonly used in literature and to interpret them physically. In the second edition of the book, chapters on roll dynamics, rollover prevention and hybrid electric vehicles have been added, and the chapter on electronic stability control has been enhanced. The use of feedback control systems on automobiles is growing rapidly. This book is intended to serve as a useful resource to researchers who work on the development of such control systems, both in the automotive industry and at universities. The book can also serve as a textbook for a graduate level course on Vehicle Dynamics and Control.