Download or read book Ammonia Production from Syngas Cost Analysis Ammonia E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of a typical Ammonia production process from synthesis gas. In this process, hydrogen, recovered from syngas feedstock, and nitrogen, recovered from air, react producing Ammonia. This report was developed based essentially on the following reference(s): "Ammonia", Kirk-Othmer Encyclopedia of Chemical Technology, 4th edition; Keywords: Haber-Bosch, Haldor Topsoe, Uhde GmbH, Ammonia Casale and KBR

Download or read book IPDI Production from Isophorone and Chlorine Cost Analysis IPDI E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Isophorone Diisocyanate (IPDI) production from isophorone and chlorine. The process examined is a typical phosgenation process. In this process, isophorone diamine (IPDA) intermediate is initially obtained from isophorone. Then, IPDA reacts with phosgene to produce IPDI. The phosgene used is generated from chlorine and carbon monoxide in an on-site unit. Hydrogen chloride (HCl) is generated as by-product. This report was developed based essentially on the following reference(s): (1) US Patent 9187412 B2, issued to Evonik Degussa in 2015 (2) US Patent 8884063 B2, issued to BASF SE in 2014 (3) US Patent 8563768, issued to Covestro (fromer Bayer MaterialScience) in 2013 Keywords: Isophorone Diisocyanate, IPDI, Isophorone Diamine, IPDA, Phosgenation

Download or read book Syngas Production from Natural Gas Cost Analysis Syngas E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Syngas (Synthesis Gas) production from natural gas. The process examined is a typical autothermal reforming process. The final product obtained is Syngas with a H2/CO ratio of 2. This report was developed based essentially on the following reference(s): "Gas Production", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Methane, Carbon Monoxide, Catalytic Reforming

Download or read book Ammonia Production from Syngas Cost Analysis Ammonia E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of a typical Ammonia production process from synthesis gas In this process, hydrogen, recovered from syngas feedstock, and nitrogen, recovered from air, react producing Ammonia. This report was developed based essentially on the following reference(s): "Ammonia", Kirk-Othmer Encyclopedia of Chemical Technology, 4th edition; Keywords: Haber-Bosch, Haldor Topsoe, Uhde GmbH, Ammonia Casale and KBR

Download or read book Dimethyl Carbonate Production Process Cost Analysis DMC E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Dimethyl Carbonate (DMC) production from methanol. The process examined is a typical oxidative carbonylation process. This process is a non-phosgene alternative for DMC production, in which CO, O2 and methanol react in the presence of copper chloride (CuCI) catalyst. Although reaction occurs in the liquid phase, a heterogeneous-phase mixture forms and the product stream is withdrawn from the reactor in vapor phase. The vapor is partially condensed, treated for recovery of catalyst and then subjected to distillation operations. Unreacted methanol is recovered and recycled to the reactor. Purified Dimethyl Carbonate is obtained after separation of side-product water. This report was developed based essentially on the following reference(s): (1) US Patent 20030236428, issued to General Electric Company (2) US Patent 5685957, issued to Enichem Synthesis in 1997 Keywords: Non-Phosgene Process, Phosgene-Free, Oxidative Carbonylation, Enichem, Eni

Download or read book Hydrogen via Natural Gas Steam Reforming Cost Analysis Hydrogen E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Hydrogen production from natural gas. The process examined is a typical steam reforming process. This process comprises the following main steps: natural gas steam reforming for syngas production; shift conversion, i.e., reaction of carbon monoxide with steam, producing carbon dioxide and additional Hydrogen; Hydrogen purification by means of a pressure swing adsorption (PSA) system. This report was developed based essentially on the following reference(s): (1) "Hydrogen, 2. Production", Ullmann's Encyclopedia of Industrial Chemistry, 2011 (2) "Hydrogen", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: H2, NG, Water-gas Shifting, Reformer, Steam Methane Reforming, SMR

Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.

Download or read book Biorenewable Resources written by Robert C. Brown and published by John Wiley & Sons. This book was released on 2013-12-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biorenewable Resources: Engineering New Products from Agriculture, 2nd Edition will provide comprehensive coverage of engineering systems that convert agricultural crops and residues into bioenergy and biobased products. This edition is thoroughly updated and revised to better serve the needs of the professional and research fields working with biorenewable resource development and production. Biorenewable resources is a rapidly growing field that forms at the interface between agricultural and plant sciences and process engineering. Biorenewable Resources will be an indispensable reference for anyone working in the production of biomass or biorenewable resources.

Download or read book Energy Issues and Transition to a Low Carbon Economy written by Francisco J. Lozano and published by Springer Nature. This book was released on 2021-08-10 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without energy, there is no well-functioning economy, besides facing social risks. This book provides a systemic approach to energy in Mexico and its relations to the USA arising from the energy reform of the former. It covers the transition from fossil fuels to a low-carbon economy, relying heavily on renewable sources and mitigating climate change risks. Several human knowledge disciplines and topics are covered in the book, including public policy, economics, transboundary issues, electricity and thermal energy, residual biomass use, distributed energy systems and its management, and decision-making tools. An analysis is considered regarding energy issues interaction in the Mexican-USA border, which differ in both countries from pricing and policy, and the work and research that has been developed for transboundary energy trade.

Download or read book Planetary Economics written by Michael Grubb and published by . This book was released on 2014 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: How well do our assumptions about the global challenges of energy, environment and economic development fit the facts? Energy prices have varied hugely between countries and over time, yet the share of national income spent on energy has remained surprisingly constant. The foundational theories of economic growth account for only about half the growth observed in practice. Despite escalating warnings for more than two decades about the planetary risks of rising greenhouse gas emissions, most governments have seemed powerless to change course. Planetary Economics shows the surprising links between these seemingly unconnected facts. It argues that tackling the energy and environmental problems of the 21st Century requires three different domains of decision-making to be recognised and connected. Each domain involves different theoretical foundations, draws on different areas of evidence, and implies different policies. The book shows that the transformation of energy systems involves all three domains - and each is equally important. From them flow three pillars of policy – three quite distinct kinds of actions that need to be taken, which rest on fundamentally different principles. Any pillar on its own will fail. Only by understanding all three, and fitting them together, do we have any hope of changing course. And if we do, the oft-assumed conflict between economy and the environment dissolves – with potential for benefits to both. Planetary Economics charts how.

Download or read book Government Reports Annual Index written by and published by . This book was released on 1990 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Hydrogen Technologies written by Luis M Gandia and published by Newnes. This book was released on 2013-05-03 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fields covered by the hydrogen energy topic have grown rapidly, and now it has become clearly multidisciplinary. In addition to production, hydrogen purification and especially storage are key challenges that could limit the use of hydrogen fuel. In this book, the purification of hydrogen with membrane technology and its storage in "solid" form using new hydrides and carbon materials are addressed. Other novelties of this volume include the power conditioning of water electrolyzers, the integration in the electric grid of renewable hydrogen systems and the future role of microreactors and micro-process engineering in hydrogen technology as well as the potential of computational fluid dynamics to hydrogen equipment design and the assessment of safety issues. Finally, and being aware that transportation will likely constitute the first commercial application of hydrogen fuel, two chapters are devoted to the recent advances in hydrogen fuel cells and hydrogen-fueled internal combustion engines for transport vehicles. - Hydrogen from water and biomass considered - Holistic approach to the topic of renewable hydrogen production - Power conditioning of water electrolyzers and integration of renewable hydrogen energy systems considered - Subjects not included in previous books on hydrogen energy - Micro process technology considered - Subject not included in previous books on hydrogen energy - Applications of CFD considered - Subject not included in previous books on hydrogen energy - Fundamental aspects will not be discussed in detail consciously as they are suitably addressed in previous books - Emphasis on technological advancements - Chapters written by recognized experts - Up-to date approach to the subjects and relevant bibliographic references

Download or read book Carbon Dioxide Mineralization and Utilization written by Pen-Chi Chiang and published by Springer. This book was released on 2017-03-04 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on an important technology for mineralizing and utilizing CO2 instead of releasing it into the atmosphere. CO2 mineralization and utilization demonstrated in the waste-to-resource supply chain can “reduce carbon dependency, promote resource and energy efficiency, and lessen environmental quality degradation,” thereby reducing environmental risks and increasing economic benefits towards Sustainable Development Goals (SDG). In this book, comprehensive information on CO2 mineralization and utilization via accelerated carbonation technology from theoretical and practical considerations was presented in 20 Chapters. It first introduces the concept of the carbon cycle from the thermodynamic point of view and then discusses principles and applications regarding environmental impact assessment of carbon capture, storage and utilization technologies. After that, it describes the theoretical and practical considerations for “Accelerated Carbonation (Mineralization)” including analytical methods, and systematically presents the carbonation mechanism and modeling (process chemistry, reaction kinetics and mass transfer) and system analysis (design and analysis of experiments, life cycle assessment and cost benefit analysis). It then provides physico-chemical properties of different types of feedstock for CO2 mineralization and then explores the valorization of carbonated products as green materials. Lastly, an integral approach for waste treatment and resource recovery is introduced, and the carbonation system is critically assessed and optimized based on engineering, environmental, and economic (3E) analysis. The book is a valuable resource for readers who take scientific and practical interests in the current and future Accelerated Carbonation Technology for CO2 Mineralization and Utilization.

Download or read book Ammonium Chloride Production Process Cost Analysis Ammonium Chloride E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ammonium Chloride production from ammonia and hydrogen chloride. The process examined is a typical solution neutralization process. In the process, hydrogen chloride reacts with ammonia, producing Ammonium Chloride crystals, which are centrifuged and dried. The mother liquor from the centrifuge is recycled back to the reactors. This report was developed based essentially on the following reference(s): Keywords: Hydrochloric Acid, Sal Ammoniac, Azane

Download or read book Microbial Production written by Hideharu Anazawa and published by Springer Science & Business Media. This book was released on 2014-02-20 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbial production: From genome design to cell surface engineering affords a comprehensive review of novel technology and approaches being implemented for manufacturing microorganisms, written by specialists in both academia and industry. This book is divided into three sections: the first includes technology for improvement of fermentation strains and many supporting technologies and information; the second examines novel technology useful for analysis of cell activities, analyzing gene function, and designing genomes of producer strains; and finally, a discussion of the practical application of the techniques and success case studies in many fields of bio-production, such as microbiological production, pharmaceuticals, chemicals, foods and cosmetics.

Download or read book Algae Based Polymers Blends and Composites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2017-06-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Based Polymers, Blends, and Composites: Chemistry, Biotechnology and Material Sciences offers considerable detail on the origin of algae, extraction of useful metabolites and major compounds from algal bio-mass, and the production and future prospects of sustainable polymers derived from algae, blends of algae, and algae based composites. Characterization methods and processing techniques for algae-based polymers and composites are discussed in detail, enabling researchers to apply the latest techniques to their own work. The conversion of bio-mass into high value chemicals, energy, and materials has ample financial and ecological importance, particularly in the era of declining petroleum reserves and global warming. Algae are an important source of biomass since they flourish rapidly and can be cultivated almost everywhere. At present the majority of naturally produced algal biomass is an unused resource and normally is left to decompose. Similarly, the use of this enormous underexploited biomass is mainly limited to food consumption and as bio-fertilizer. However, there is an opportunity here for materials scientists to explore its potential as a feedstock for the production of sustainable materials. - Provides detailed information on the extraction of useful compounds from algal biomass - Highlights the development of a range of polymers, blends, and composites - Includes coverage of characterization and processing techniques, enabling research scientists and engineers to apply the information to their own research and development - Discusses potential applications and future prospects of algae-based biopolymers, giving the latest insight into the future of these sustainable materials

Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.