Download or read book Advances in Polyolefins written by R.B. Seymour and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Advances in Polyolefins written by T.C. Chung and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin is one of the most important materials produced in the chemical industry. The research in this area is not only scientifically challenging but also potentially economically rewarding. Many research activities, such as developing new catalysts, understanding polymerization mechanisms, modifying the products and improving the physical properties of the material, have been proceeding at a very fast pace, especially in the industrial laboratories in many countries. It is very important and exciting to bring researchers active in this area, from both the academic and industrial sectors, to communicate their new findings. To the best of my knowledge, a symposium covering diverse aspects of polyolefin research has not been held in the USA for many years. With this in mind, a symposium entitled "Recent Advances in Polyolefins" was held at the National ACS Meeting in Washington D. C. , August 23-28, 1992. This symposium covered both scientific and technological aspects of polyolefin, which included four sections: CatalystIPolymerization, Functionalization of Polyolefins, Blends of Polyolefins with Other Polymers, and Applications. More than 50 papers, including 20 foreign contributions, were presented during three and a half days of meetings. It was truly exciting to see key researchers from both academic and industrial laboratories exchange their recent results and to share the important developments in polyolefins. This volume is based on the same spirit and is intended to capture some of the most recent and emerging technical achievements presented at the meeting.
Download or read book Advances in Polyolefin Nanocomposites written by Vikas Mittal and published by CRC Press. This book was released on 2010-12-07 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of polymer nanocomposites, research on polyolefin nanocomposites has grown exponentially. Correcting the deficiency of a meaningful text on these important materials, Advances in Polyolefin Nanocomposites:Sums up recent advances in nanoscale dispersion of filler in polyolefinsPresents a basic introduction to polyolefin nanocomposite
Download or read book New Advances in Polyolefins written by T. C. Chung and published by . This book was released on 1994-01-01 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polyolefins 50 years after Ziegler and Natta II written by Walter Kaminsky and published by Springer. This book was released on 2013-11-29 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Functionalization of Polyolefins written by T. C. Chung and published by Academic Press. This book was released on 2002-02-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the significant experimental results on the functionalization of polyolefins and classifies them into several chemical methods. This book also provides information on the functional polyolefin materials. It covers: chemical approaches in the functionalization of polyolefins, and polyolefin materials and their potential applications.
Download or read book Advances in Polymers written by A. Barnetson and published by iSmithers Rapra Publishing. This book was released on 1997 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report considers recent advances in polymerisation and catalyst technology. The technical and market implications of these metallocenes are discussed and novel polymeric materials are considered.
Download or read book Advances in Polyolefins The World s Most Widely Used Polymers written by Seymour RB ED. and published by . This book was released on 1978 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polyolefins 50 years after Ziegler and Natta I written by Walter Kaminsky and published by Springer. This book was released on 2013-12-19 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Polyolefin Compounds and Materials written by Mariam Al-Ali AlMa'adeed and published by Springer. This book was released on 2015-12-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.
Download or read book Handbook of Polyolefins written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Download or read book Recent advances in polyolefins written by John P. Hood and published by . This book was released on 1966 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Separation Techniques for Polyolefins written by Harald Pasch and published by Springer. This book was released on 2014-08-27 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Laboratory volume introduces the reader to advanced techniques for the separation and fractionation of polyolefins. It includes detailed information on experimental protocols and procedures, addressing the experimental background of different polyolefin fractionation techniques in great detail. The book summarizes important applications in all major fractionation methods with emphasis on multidimensional analytical approaches. It comprises the most powerful modern techniques, such as high temperature size exclusion chromatography (HT-SEC) for molar mass analysis, temperature rising elution fractionation (TREF) and crystallization analysis fractionation (CRYSTAF) for the analysis of chemical composition and branching, high temperature two-dimensional liquid chromatography (HT-2D-LC), solvent and temperature gradient interaction chromatography (SGIC and TGIC) and crystallization elution fractionation (CEF). Beginners as well as experienced chromatographers will benefit from this concise introduction to a great variety in instrumentation, separation procedures and applications. With detailed descriptions of experimental approaches for the analysis of complex polyolefins, the readers are offered a toolbox to solve simple as well as sophisticated separation tasks. The book starts with an introduction into the molecular complexity of polyolefins - the most widely used synthetic polymers with rapidly growing production capacities. It systematically discusses crystallization based fractionation techniques including TREF, CRYSTAF and CEF and column chromatographic techniques for molar mass, chemical composition and microstructure, as well as the combination of different fractionations in multidimensional experimental setups. This book also includes basic information on the application of high-temperature field-flow fractionation.
Download or read book Polyolefins 50 years after Ziegler and Natta I written by Walter Kaminsky and published by Springer. This book was released on 2013-12-24 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Addcon World 99 written by and published by iSmithers Rapra Publishing. This book was released on 1999 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Organometallic Chemistry written by Pedro J. Perez and published by Academic Press. This book was released on 2015-10-07 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Organometallic Chemistry contains authoritative reviews on the field of organometallic chemistry, covering topics in organometallic synthesis, reactions, mechanisms, homogeneous catalysis, and more. The book will benefit a wide range of researchers involved in organometallic chemistry, including synthetic protocols, mechanistic studies, and practical applications. Contains contributions from leading authorities in the field of organometallic chemistry Covers topics in organometallic synthesis, reactions, mechanisms, homogeneous catalysis, and more. Informs and updates readers on all the latest developments in the field Carefully edited to provide easy-to-read material
Download or read book Advances in Thermoplastic Elastomers written by Nikhil K. Singha and published by Elsevier. This book was released on 2024-01-26 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Thermoplastic Elastomers: Challenges and Opportunities brings together the state-of-the-art in thermoplastic elastomers (TPEs), covering innovative materials, synthesis techniques, processing methods and sustainability. Sections outline thermoplastic elastomers, rubber elastic, and thermoplastic vulcanizates, and review the current landscape, from research and published literature, to commercialization and patents. Subsequent chapters offer methodical coverage of different categories of advanced thermoplastic elastomer materials, including areas such as polyolefin-based TPEs and high performance TPEs. The final chapters in the book examine options for sustainability, including bio-based, bio-resourced, and biodegradable TPEs, as well as circular economy and recycling of TPEs.Finally, outlook and future market and research trends are reviewed. This is a valuable book for researchers and advanced students working with elastomers, polymer science, materials chemistry, and materials engineering. In an industrial setting, this is an essential resource for R&D professionals, scientists, and engineers looking to utilize thermoplastic elastomers in a range of advanced applications. Focuses on novel materials, such as polyolefin-based TPEs, fluorinated TPEs, silicone-based TPEs, and ionic TPEs Discusses sustainability in terms of bio-based or biocompatible TPEs, recycling and the circular economy Helps bridge the gap between research and commercialization, reviewing patents, literature, trends, and market.
