Download or read book Advances in Metal Oxides and Their Composites for Emerging Applications written by Sagar D. Delekar and published by Elsevier. This book was released on 2022-08-26 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Metal Oxides and their Composites for Emerging Applications reviews key properties of metal-oxide based composites, including their structural, physicochemical, optical, electrical components and resulting performance in a wide range of diverse applications. Synthetic protocols used to create metal oxides with desirable morphologies, properties and performance for applications in solar energy harvesting, energy storage and environmental remediation are emphasized. Emerging technologies that address important global challenges such as energy shortage, the hazardous effects of non-renewable energy sources, unaffordable energy technologies, and the contaminants present in air and water are also covered. This book is an ideal resource for materials scientists and engineers working in academia and R&D. In addition, it's appropriate for those who either need an introduction to potential research directions or for experienced researchers and practitioners looking for a key reference on the latest advances. Introduces the fundamental properties of metal oxide-based composites, paying special attention to physicochemical, optical, electrical and structural characteristics Provides an overview of the synthetic protocols used to design and tune the properties of metal oxide-based composites for key emerging applications Discusses metal oxide-based composites and their use in energy applications such as energy storage, energy harvesting and environmental remediation

Download or read book Metal Oxide Based Nanofibers and Their Applications written by Vincenzo Esposito and published by Elsevier. This book was released on 2021-10-25 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-based Nanofibers and their Applications provides an in-depth overview on developments surrounding the synthesis, characterization properties, and applications achieved by scientific leaders in the area. Sections deal with the theoretical and experimental aspects of the synthesis and methodologies to control microstructure, composition and shape of the nanofibrous metal oxides, review the applications of metal oxide nanofibers in diverse technologies, with special focus on the relation between the structural, morphological and compositional features of the nanofibers, cover applications of metal oxide nanofibers in the fields of sensing (biosensing, gas sensing), and consider biomedical and cleaning technologies. Lastly, a final section covers their application in energy generation and storage technologies (e. g. piezoelectric, solar cells, solid oxide fuel cells, lithium-ion batteries, supercapacitors, and hydrogen storage are reviewed. Reviews electrospinning methods for the synthesis and design of nanocomposites and hybrid metal oxide nanofibers Discusses applications of metal oxide nanofibers in sensing, biomedical fields, cleaning technologies, and energy Emphasizes the structural, morphological and compositional properties of nanofibers and their effect on device performance

Download or read book Complex and Composite Metal Oxides for Gas VOC and Humidity Sensors Volume 2 written by Bal Chandra Yadav and published by Elsevier. This book was released on 2024-04-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.530 pages Provides an overview of the material preparation and synthesis strategies of metal oxide composite and metal oxide hybrid materials for use in gas and humidity sensors Reviews emerging advanced metal oxide materials such as perovskites, spinel ferrites, and quaternary materials for gas and VOC sensors Discusses the potential opportunities and challenges to be circumvented in the use of metal oxide materials to enable new sensor technologies

Download or read book Renewable Polymers and Polymer Metal Oxide Composites written by Sajjad Haider and published by Elsevier. This book was released on 2022-03-17 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Polymers and Polymer-Metal Oxide Composites: Synthesis, Properties, and Applications serves as a reference on the key concepts of the advances of polymer-oxide composites. The book reviews knowledge on polymer-composite theory, properties, structure, synthesis, and their characterization and applications. There is an emphasis on coupling metal oxides with polymers from renewable sources. Also, the latest advances in the relationship between the microstructure of the composites and the resulting improvement of the material’s properties and performance are covered. The applications addressed include desalination, tissue engineering, energy storage, hybrid energy systems, food, and agriculture. This book is suitable for early-career researchers in academia and R&D in industry who are working in the disciplines of materials science, engineering, chemistry and physics. Provides basic principles, theory and synthetic methods of composite materials, polymer composites and metal oxides Reviews the latest advances in polymer-oxide-based applications in medicine, water treatment, energy and sensing Discusses materials from renewable resources, including lifecycle assessment, economic aspects and potential application in tissue engineering, photovoltaics and food packaging

Download or read book Graphene Oxide Metal Oxide and other Graphene Oxide Based Composites in Photocatalysis and Electrocatalysis written by Jiaguo Yu and published by Elsevier. This book was released on 2022-06-24 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene Oxide-Metal Oxide and other Graphene Oxide-Based Composites in Photocatalysis and Electrocatalysis reflects on recent progress and challenges in graphene-metal oxide composites. The book reviews synthetic strategies, characterization methods and applications in photocatalysis and electrocatalysis. Graphene-metal oxides, graphene-novel metals and other composites intended for sustainable energy production, energy storage, and environmental development such as H2 production, CO2 reduction, pollutant removal, supercapacitors and lithium ion batteries are covered. Overall, this book presents a comprehensive, systematic, and up-to-date summary on graphene oxide-based materials. Graphene oxide and related composite materials bring new perspectives and prospects to both photocatalysts and electrocatalysts. The collective and synergistic effect between graphene oxide and metal oxide are manifold. The significance of the relationship among these groups of materials, their structures and performance is emphasized. Introduces the fundamentals of graphene oxides, their derivatives, common processes, principles and requirements for photocatalysis and electrocatalysis Reviews graphene-oxides for photocatalysis applications in H2 production, CO2 reduction, environment remediation, and more Covers graphene-oxides for electrocatalysis applications in energy, including supercapacitors and lithium-ion batteries

Download or read book Complex and Composite Metal Oxides for Gas VOC and Humidity Sensors Volume 1 written by Bal Chandra Yadav and published by Elsevier. This book was released on 2023-10-16 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex and Composite Metal Oxides for Gas, VOC, and Humidity Sensors focuses on an overview of the advanced nanocomposite metal oxide materials for use in sensors for environmental monitoring applications. Volume 1 Fundamentals and Approaches introduces the ground rules essential for the development of smart gas, VOC and humidity sensors. This volume familiarizes researchers with the different sensors (resistive, electrolyte, FET, optical etc.) developed on various properties that includes electrical, SPR, luminescence, fiber optics etc. fabricated using metal oxide hybrids and nanocomposites. Introduces fundamentals of electrical and optical gas and humidity sensors Reviews metal oxide hybrid materials for gas and humidity sensor applications, including metal oxide/polymer and metal oxide/carbon composite materials Discusses metal oxide candidate materials for use in gas, VOC, and humidity sensors

Download or read book Metal Oxides for Optoelectronics and Optics Based Medical Applications written by Suresh Sagadevan and published by Elsevier. This book was released on 2022-07-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Optoelectronics and Optics-based Medical Applications reviews recent advances in metal oxides and their mechanisms for optoelectronic, photoluminescent and medical applications. In addition, the book examines the integration of key chemistry concepts with nanoelectronics that can improve performance in a diverse range of applications. Sections place a strong emphasis on synthesis processes that can improve the metal oxides’ physical properties and the reflected surface chemical changes that can impact their performance in various devices like light-emitting diodes, luminescence materials, solar cells, etc. Finally, the book discusses the challenges associated with the handling and maintenance of metal oxides crystalline properties. This book will be suitable for academics and those working in R&D in industry looking to learn more about cheaper and more effective methods to produce metal oxides for use in the fields of electronics, photonics, biophotonics and engineering. Reviews the latest advances in the utilization of metal oxide materials in photonics, optoelectronics and optics-based medical applications Considers the most relevant synthesis strategies for the development of high-performing metal oxide-based devices Addresses a wide range of metal oxides including photonic crystals, fibers, metastructures, glasses, and more

Download or read book Metal Oxide Carbon Hybrid Materials written by Muhammad Akram Chaudhry and published by Elsevier. This book was released on 2022-03-20 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications reviews the advances in the fabrication and application of metal oxide–carbon-based nanocomposite materials. Their unique properties make them ideal materials for gas-sensing, photonics, catalysis, opto-electronic, and energy-storage applications. In the first section, the historical background to the hybrid materials based on metal oxide–carbon and the hybridized metal oxide composites is provided. It also highlights several popular methods for the preparation of metal oxide–carbon composites through solid-state or solution-phase reactions, and extensively discusses the materials’ properties. Fossil fuels and renewable energy sources cannot meet the ever-increasing energy demands of an industrialized and technology-driven global society. Therefore, the role of metal oxide–carbon composites in energy generation, hydrogen production, and storage devices, such as rechargeable batteries and supercapacitors, is of extreme importance. These problems are discussed in in the second section of the book. Rapid industrialization has resulted in serious environmental issues which in turn have caused serious health problems that require the immediate attention of researchers. In the third section, the use of metal oxide–carbon composites in water purification, photodegradation of industrial contaminants, and biomedical applications that can help to clean the environment and provide better healthcare solutions is described. The final section is devoted to the consideration of problems associated with the development of sensors for various applications. Numerous studies performed in this area have shown that the use of composites can significantly improve the operating parameters of such devices. Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications presents a comprehensive review of the science related to metal oxide–carbon composites and how researchers are utilizing these materials to provide solutions to a large array of problems. Reviews the fundamental properties and fabrication methods of metal-oxide–carbon composites Discusses applications in energy, including energy generation, hydrogen production and storage, rechargeable batteries, and supercapacitors Includes current and emerging applications in environmental remediation and sensing

Download or read book Metallic Glasses and Their Oxidation written by Xinyun Wang and published by Elsevier. This book was released on 2022-11-03 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Glasses and Their Oxidation provides a comprehensive review of the structures, properties, preparations, processing and applications of metallic glasses. Special attention is paid to the oxidation behaviors and related mechanisms of metallic glasses that occur during their preparation, processing and application. The book's authors introduce basic knowledge of metallic glasses, including their structures, properties, processing techniques and applications. Then, the theories and techniques commonly used in oxidation investigation are highlighted, including thermal oxidation, native oxidation, stressed oxidation, powder oxidation and oxidation simulation. The book closes with the influence of oxidation on the structures and performances of metallic glasses, proposes measures to control oxidation, and discusses how to take advantage of oxidation to reinforce materials or create new materials. Introduces the latest knowledge on the structures, properties, preparation, processing and application of metallic glasses Reviews the fundamental concepts surrounding metal oxidation, including techniques, devices and methods frequently used in oxidation research Discusses measures to control oxidation and the possibilities of using oxidation to reinforce metallic glasses or create new types of materials

Download or read book Metal Oxides for Non volatile Memory written by Panagiotis Dimitrakis and published by Elsevier. This book was released on 2022-03-01 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Non-volatile Memory: Materials, Technology and Applications covers the technology and applications of metal oxides (MOx) in non-volatile memory (NVM) technology. The book addresses all types of NVMs, including floating-gate memories, 3-D memories, charge-trapping memories, quantum-dot memories, resistance switching memories and memristors, Mott memories and transparent memories. Applications of MOx in DRAM technology where they play a crucial role to the DRAM evolution are also addressed. The book offers a broad scope, encompassing discussions of materials properties, deposition methods, design and fabrication, and circuit and system level applications of metal oxides to non-volatile memory. Finally, the book addresses one of the most promising materials that may lead to a solution to the challenges in chip size and capacity for memory technologies, particular for mobile applications and embedded systems. Systematically covers metal oxides materials and their properties with memory technology applications, including floating-gate memory, 3-D memory, memristors, and much more Provides an overview on the most relevant deposition methods, including sputtering, CVD, ALD and MBE Discusses the design and fabrication of metal oxides for wide breadth of non-volatile memory applications from 3-D flash technology, transparent memory and DRAM technology

Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.

Download or read book Multifunctional Inorganic Nanomaterials for Energy Applications written by H.P. Nagaswarupa and published by CRC Press. This book was released on 2024-06-19 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multifunctional Inorganic Nanomaterials for Energy Applications provides deep insight into the role of multifunctional nanomaterials in the field of energy and power generation applications. It mainly focuses on the synthesis, fabrication, design, development, and optimization of novel functional inorganic nanomaterials for energy storage and saving devices. It also covers studies of inorganic electrode materials for supercapacitors, membranes for batteries and fuel cells, and materials for display systems and energy generation. Features: Explores computational and experimental methods of preparing inorganic nanomaterials and their multifunctional applications Includes synthesis and performance analysis of various functional nanomaterials for energy storage and saving applications Reviews current research directions and latest developments in the field of energy materials Discusses importance of computational techniques in designing novel nanomaterials Highlights importance of multifunctional applications of nanomaterials in the energy sector This book is aimed at graduate students and researchers in materials science, electrical engineering, and nanomaterials.

Download or read book Metal Oxides and Related Solids for Electrocatalytic Water Splitting written by Junlei Qi and published by Elsevier. This book was released on 2022-05-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides and Related Solids for Electrocatalytic Water Splitting reviews the fundamentals and strategies needed to design and fabricate metal oxide-based electrocatalysts. After an introduction to the key properties of transition metal oxides, materials engineering methods to optimize the performance of metal-oxide based electrocatalysts are discussed. Strategies reviewed include defect engineering, interface engineering and doping engineering. Other sections cover important categories of metal-oxide (and related solids) based catalysts, including layered hydroxides, metal chalcogenides, metal phosphides, metal nitrides, metal borides, and more. Each chapter introduces important properties and material design strategies, including composite and morphology design. There is also an emphasis on cost-effective materials design and fabrication for optimized performance for electrocatalytic water splitting applications. Lastly, the book touches on recently developed in-situ characterization methods applied to observe and control the material synthesis process. Introduces metal oxide-based materials for electrocatalytic water splitting applications, including their key properties, synthesis, design and fabrication strategies Reviews the most relevant materials design strategies, including defect engineering, interface engineering, and doping engineering Discusses the pros and cons of metal oxide-based materials for water splitting applications to aid in materials selection

Download or read book Solution Methods for Metal Oxide Nanostructures written by Rajaram S. Mane and published by Elsevier. This book was released on 2023-06-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solution Methods for Metal Oxide Nanostructures reviews solution processes that are used for synthesizing 1D, 2D and 3D metal oxide nanostructures in either thin film or in powder form for various applications. Wet-chemical synthesis methods deal with chemical reactions in the solution phase using precursors at proper experimental conditions. Wet-chemical synthesis routes offer a high degree of controllability and reproducibility for 2D nanomaterial fabrication. Solvothermal synthesis, template synthesis, self-assembly, oriented attachment, hot-injection, and interface-mediated synthesis are the main wet-chemical synthesis routes for 2D nanomaterials. Solution Methods for Metal Oxide Nanostructures also addresses the thin film deposition metal oxides nanostructures, which plays a very important role in many areas of chemistry, physics and materials science.Each chapter includes information on a key solution method and their application in the design of metal oxide nanostructured materials with optimized properties for important applications. The pros and cons of the solution method and their significance and future scope is also discussed in each chapter. Readers are provided with the fundamental understanding of the key concepts of solution synthesis methods for fabricating materials and the information needed to help them select the appropriate method for the desired application. Reviews the most relevant wet chemical solution methods for metal oxide nanostructures, including sol-gel, solvothermal, hydrothermal, co-precipitation methods, and more Addresses thin film deposition techniques for metal oxide nanostructures, such as spray-pyrolysis, electrodeposition, spin coating and self-assembly Discusses the pros and cons of each solution method and its significance and future opportunities

Download or read book Metal Oxide Defects written by Vijay Kumar and published by Elsevier. This book was released on 2022-11-19 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Defects: Fundamentals, Design, Development and Applications provides a broad perspective on the development of advanced experimental techniques to study defects and their chemical activity and catalytic reactivity in various metal oxides. This book highlights advances in characterization and analytical techniques to achieve better understanding of a wide range of defects, most importantly, state-of-the-art methodologies for controlling defects. The book provides readers with pathways to apply basic principles and interpret the behavior of metal oxides. After reviewing characterization and analytical techniques, the book focuses on the relationship of defects to the properties and performance of metal oxides. Finally, there is a review of the methods to control defects and the applications of defect engineering for the design of metal oxides for applications in optoelectronics, energy, sensing, and more. This book is a key reference for materials scientists and engineers, chemists, and physicists. Reviews advances in characterization and analytical techniques to understand the behavior of defects in metal oxide materials Introduces defect engineering applied to the design of metal oxide materials with desirable properties Discusses applications of defect engineering to enhance the performance of materials for a wide range of applications, with an emphasis on optoelectronics

Download or read book Perovskite Metal Oxides written by Srikanta Moharana and published by Elsevier. This book was released on 2023-05-30 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Metal Oxides: Synthesis, Properties and Applications provides an overview on the topic, including the synthesis of various types of perovskites, their properties, characterization and application. The book reviews the applications of this category of materials for photovoltaics, electronics, biomedical, fuel cell, photocatalyst, sensor, energy storage and catalysis, along with processing techniques of perovskite metal oxides with a focus on low-cost and high-efficiency methods, including various properties and probable applications in academia and industry. Other sections discuss strategies to improve the functionality of perovskite metal oxide materials, including chemical methods and controlling the size, shape and structure of the materials. Finally, applications of perovskite metal oxides in energy conversion and storage, sensing and electronics are covered. Provides an overview of perovskite metal oxides, with an emphasis on synthesis, fabrication and characterization methods Discusses strategies to improve the functionality of perovskite metal oxide materials, including chemical methods and controlling the size, shape and structure of the materials Reviews applications of perovskite metal oxides in energy conversion and storage, sensing and electronics

Download or read book Metal Oxide Based Heterostructures written by Naveen Kumar and published by Elsevier. This book was released on 2022-11-13 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Based Heterostructures: Fabrication and Applications provides information on synthesis strategies, structural and hierarchical features, morphological characteristics of metal oxide–based heterostructures, and their diverse applications. This book begins with an introduction to the various multidimensional heterostructures, synthesis aspects, and techniques used to control the formation of heterostructures. Then, the impact of synthesis routes on the formation of mixed metal oxide heterostructures and their properties are analyzed. The effect of nonmetal doping, metal doping, and composites of metal oxide heterostructures on the properties of heterostructures is also addressed and that also includes opportunities for optimization of the material’s performance for specific applications. Special attention is given to the surface characteristics of the metal oxide heterostructures and their impact on the material’s performance, and the applications of metal oxide heterostructures in various fields such as environmental remediation, sensing, organic catalysis, photovoltaics, light emitting materials, and hydrogen production. Introduces key principles for metal oxide heterostructures, their properties, key characteristics, and synthesis routes Emphasizes the relationship between synthesis strategies and material performance, including optimization strategies such as tailoring the material’s surface characteristics or structure Discusses metal oxide heterostructures and their application in lighting and displays, energy, environment, and sensing