Download or read book Advances in Materials Manufacturing Science and Technology XIV written by Tian Huang and published by Trans Tech Publications Ltd. This book was released on 2011-09-21 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 14th International Manufacturing Conference in China (IMCC 2011), October 13-15, 2011, Tianjin, China
Download or read book Materials and Manufacturing Technologies XIV written by Faruk Yigit and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).This special issue of Advanced Materials Research contains a selection of high-quality research papers presented at the 14th International Conference on Advances in Materials and Processing Technologies (AMPT) held in Istanbul, Turkey, on July 13-16th, 2011. The papers are related mainly to materials and processing technologies, and the aim of the book is to provide a basis for the identification of new research and development needs in the fields of advanced engineering materials and manufacturing technologies.
Download or read book Non Conventional Machining in Modern Manufacturing Systems written by Kumar, Kaushik and published by IGI Global. This book was released on 2018-09-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous improvements in machining practices have created opportunities for businesses to develop more streamlined processes. This not only leads to higher success in day-to-day production, but also increases the overall success of businesses. Non-Conventional Machining in Modern Manufacturing Systems provides emerging research exploring the theoretical and practical aspects of technological advancements in industrial environments and applications in manufacturing. Featuring coverage on a broad range of topics such as optimization techniques, electrical discharge machining, and hot machining, this book is ideally designed for business managers, engineers, business professionals, researchers, and academicians seeking current research on non-conventional and technologically advanced machining processes.
Download or read book Advances in Materials Manufacturing Science and Technology written by Xing Ai and published by Trans Tech Publications Ltd. This book was released on 2004-12-15 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection comprises a selection of over 180 papers; submitted to the editors by numerous universities and industrial concerns, and subjected to peer-review by at least two expert referees. Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers were selected on the basis of their quality, and their combined coverage of the main topics of the book.
Download or read book Advances in Materials Manufacturing Science and Technology II written by Cheng Yu Jiang and published by Trans Tech Publications Ltd. This book was released on 2006-12-15 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume contains 293 selected and peer-reviewed papers, carefully chosen from among the more than 500 papers presented, by worldwide specialists from industry and academia, at the 12th International Manufacturing Conference in China; organized by the Northwestern Polytechnic University. Volume is indexed by Thomson Reuters CPCI-S (WoS).
Download or read book Advances in Materials Manufacturing Science and Technology XV written by Ru Peng Zhu and published by Trans Tech Publications Ltd. This book was released on 2013-10-25 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this special volume represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technology and applications. Especially, the papers cover the topics of advanced manufacturing technology and equipment, material forming science and technology, digital manufacturing system and management, modern design theory and methodology, and MEMS and ultra precision manufacturing. Volume is indexed by Thomson Reuters CPCI-S (WoS).
Download or read book Drills written by Viktor P. Astakhov and published by CRC Press. This book was released on 2014-04-08 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a presentation that balances theory and practice, Drills: Science and Technology of Advanced Operations details the basic concepts, terminology, and essentials of drilling. The book addresses important issues in drilling operations, and provides help with the design of such operations. It debunks many old notions and beliefs while introducing scientifically and technically sound concepts with detailed explanations. The book presents a nine-step drilling tool failure analysis methodology that includes part autopsy and tool reconstruction procedure. A special feature of the book is the presentation of special mechanisms of carbide (e.g. cobalt leaching) and polycrystalline (PCD) tool wear and failure presented and correlated with the tool design, manufacturing, and implementation practice. The author also introduces the system approach to the design of the drilling system formulating the coherency law. Using this law as the guideline, he shows how to formulate the requirement to the components of such a system, pointing out that the drilling tool is the key component to be improved. Teaching how to achieve this improvement, the book provides the comprehensive scientific and engineering foundations for drilling tool design, manufacturing, and applications of high-performance tools. It includes detailed explanations of the design features, tool manufacturing and implementation practices, metrology of drilling and drilling tools, and the tool failure analysis. It gives you the information needed for proper manufacturing and selection of a tool material for any given application.
Download or read book Advances in Materials Manufacturing Science Technology XIII written by Dongming Guo and published by Trans Tech Publications Ltd. This book was released on 2009-08-31 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume is part 2 of a mini-series on, Materials Manufacturing Science and Technology XII. It covers three topics: Modern design theory & methodology, MEMS & nanotechnology, Materials science & technology in manufacturing. Presented here is a collection of 125 papers selected from over 510 papers originally submitted by universities and industrial concerns all over the world. All of the papers have been peer-reviewed. The papers selected for this volume were chosen on the basis of their quality and their relevance to the topic. This work reflects the latest developments in this field; running the gamut from fundamentals to new techniques and applications.
Download or read book Materials Science and Engineering written by William D. Callister and published by . This book was released on 2020-09-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Manufacturing and Processing Technology written by Chander Prakash and published by CRC Press. This book was released on 2020-10-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates recent research, theories, and practices relevant to the areas of surface engineering and the processing of materials for functional applications in the aerospace, automobile, and biomedical industries. The book focuses on the hidden technologies and advanced manufacturing methods that may not be standardized by research institutions but are greatly beneficial to material and manufacturing industrial engineers in many ways. It details projects, research activities, and innovations in a global platform to strengthen the knowledge of the concerned community. The book covers surface engineering including coating, deposition, cladding, nanotechnology, surface finishing, precision machining, processing, and emerging advanced manufacturing technologies to enhance the performance of materials in terms of corrosion, wear, and fatigue. The book captures the emerging areas of materials science and advanced manufacturing engineering and presents recent trends in research for researchers, field engineers, and academic professionals.
Download or read book Advances in Materials Manufacturing Science and Technology XIII Advanced manufacturing technology and equipment and manufacturing systems and automation written by and published by . This book was released on 2009 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials Science Technology in China A Roadmap to 2050 written by Ke Lu and published by Springer Science & Business Media. This book was released on 2010-08-09 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the eighteen field-specific reports comprising the comprehensive scope of the strategic general report of the Chinese Academy of Sciences, this sub-report addresses long-range planning for developing science and technology in the field of advanced materials science. They each craft a roadmap for their sphere of development to 2050. In their entirety, the general and sub-group reports analyze the evolution and laws governing the development of science and technology, describe the decisive impact of science and technology on the modernization process, predict that the world is on the eve of an impending S&T revolution, and call for China to be fully prepared for this new round of S&T advancement. Based on the detailed study of the demands on S&T innovation in China's modernization, the reports draw a framework for eight basic and strategic systems of socio-economic development with the support of science and technology, work out China's S&T roadmaps for the relevant eight basic and strategic systems in line with China's reality, further detail S&T initiatives of strategic importance to China's modernization, and provide S&T decision-makers with comprehensive consultations for the development of S&T innovation consistent with China's reality. Supported by illustrations and tables of data, the reports provide researchers, government officials and entrepreneurs with guidance concerning research directions, the planning process, and investment. Founded in 1949, the Chinese Academy of Sciences is the nation's highest academic institution in natural sciences. Its major responsibilities are to conduct research in basic and technological sciences, to undertake nationwide integrated surveys on natural resources and ecological environment, to provide the country with scientific data and consultations for government's decision-making, to undertake government-assigned projects with regard to key S&T problems in the process of socio-economic development, to initiate personnel training, and to promote China's high-tech enterprises through its active engagement in these areas.
Download or read book Progress in Manufacturing Automation Technologies written by Guang Lin Wang and published by Trans Tech Publications Ltd. This book was released on 2011-07-27 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This special collection describes the latest progress made in, and research results coming out, of new theories, technologies, methods and equipment in the fields of materials processing and manufacturing automation technology. It will be an essential aid in grasping the new technological and research trends, at the international scale, which will drive worldwide communication and cooperation concerning production, education and research in this field. The main topics covered by this special issue include: Innovation and Experience in Materials Processing and Manufacturing Automation Education, Materials Processing Technology, Manufacturing Process Simulation, Agile Manufacturing, Green Manufacturing and Re-Manufacturing, CAD/CAE/CAPP/CAM, Computerized Numerical Control Systems and Flexible Manufacturing Systems, Process Monitoring and Quality Control of Manufacturing Systems, Finite Element Analysis and Structure Optimization for Smart Materials and Other Related Topics. A wealth of ideas for the future.
Download or read book Advances in Materials Manufacturing Science and Technology XIII Volume I written by Dongming Guo and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume comprises a collection of 139 papers chosen, from among 510 submissions from universities and industries all over the world, on the basis of their quality and relevance to the central topic. All of the papers were peer-reviewed by selected experts and mirror the latest developments in the field of materials manufacturing technology; ranging from the fundamentals, to new technologies and applications. The papers specifically cover the topics of advanced manufacturing technology and equipment, and manufacturing systems and automation.Volume is indexed by Thomson Reuters CPCI-S (WoS). This book therefore constitutes a valuable reference work for all researchers, in the field of materials manufacturing science and technology, who wish to understand further the underlying mechanisms and thereby create new and practical technologies, systems and processes. It will also be particularly useful to practising engineers in manufacturing who are charged with providing efficient and effective operations.
Download or read book Recent Advances in Material Manufacturing and Machine Learning written by Bjorn Schuller and published by CRC Press. This book was released on 2024-06-17 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of the 2nd international conference on recent advances in materials manufacturing and machine learning processes-2023 (RAMMML-23) is to bring together all interested academic researchers, scientists, engineers, and technocrats and provide a platform for continuous improvement of manufactur□ing, machine learning, design and materials engineering research. RAMMML 2023 received an overwhelm□ing response with more than 530 full paper submissions. After due and careful scrutiny, about 120 of them have been selected for presentation. The papers submitted have been reviewed by experts from renowned institutions, and subsequently, the authors have revised the papers, duly incorporating the suggestions of the reviewers. This has led to significant improvement in the quality of the contributions, Taylor & Francis publications, CRC Press have agreed to publish the selected proceedings of the conference in their book series of Advances in Mechanical Engineering and Interdisciplinary Sciences. This enables fast dissemina□tion of the papers worldwide and increases the scope of visibility for the research contributions of the authors.
Download or read book Advances in Materials Manufacturing Science and Technology XIII Modern design theory and methodology MEMS and Nanotechnology and Material science and technology in manufacturing written by and published by . This book was released on 2009 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances on Material Science and Manufacturing Technologies written by Qingzhou Xu and published by . This book was released on 2013-02-28 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
