Download or read book Advances in Waste to Energy Technologies written by Rajeev Singh and published by CRC Press. This book was released on 2019-11-14 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: As global populations continue to increase, the application of biotechnological processes for disposal and control of waste has gained importance in recent years. Advances in Waste-to-Energy Technologies presents the latest developments in the areas of solid waste management, Waste-to-Energy (WTE) technologies, biotechnological approaches, and their global challenges. It combines biotechnological procedures, sophisticated modeling, and techno-economic analysis of waste, and examines the current need for the maximum recovery of energy from wastes as well as the associated biotechnological and environmental impacts. Features: Presents numerous waste management practices and methods to recover resources from waste using the best biotechnological approaches available. Addresses the challenges, management, and policy issues of waste management and WTE initiatives. Includes practical case studies from around the world. Serves as a useful resource for professionals and students involved in cross-disciplinary and trans-disciplinary research programs and related courses. Discusses the economic and regulatory contexts for managing waste. This book will serve as a valuable reference for researchers, academicians, municipal authorities, government bodies, waste managers, building engineers, and environmental consultants requiring an understanding of waste management and the latest WTE technologies.
Download or read book Advances in Energy from Waste written by Viola Vambol and published by Elsevier. This book was released on 2024-07-26 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances of Energy from Waste: Transformation Methods, Applications and Limitations Under Sustainability provides advanced, systematic information on the environmental transformation of waste and pollutants of various origins into useful products, contributing to the development of the local economy, and increasing the sustainability of the energy sector. In addition, remarkable competences in design, performance, efficiency, and implementation of diverse systems utilized for waste energy recovery are summarized and evaluated. This book will also include recent advances in biomass-derived green catalysts for various catalytic applications are discussed in this book along with the challenges of controlled synthesis and the impact of morphological, physical, and chemical properties on their adsorption or desorption capability. Advances of Energy from Waste: Transformation Methods, Applications and Limitations Under Sustainability discuss waste management priorities, waste to energy, environmental pollution, remediation, health risks, circular economy, recycling, sustainability, technologies, and more. Serves as a starting point for further research into waste management and biomass conversion Provides an overview of recent developments in the field of waste-to-energy Discusses recent advances in biomass-derived green catalysts for various catalytic applications Introduces diverse case studies on waste, pollution, sustainability, technologies, health risk, and future prospective
Download or read book Sustainable Food Waste to Energy Systems written by Thomas Trabold and published by Academic Press. This book was released on 2018-09-05 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Food Waste-to-Energy Systems assesses the utilization of food waste in sustainable energy conversion systems. It explores all sources of waste generated in the food supply chain (downstream from agriculture), with coverage of industrial, commercial, institutional and residential sources. It provides a detailed analysis of the conventional pathways for food waste disposal and utilization, including composting, incineration, landfilling and wastewater treatment. Next, users will find valuable sections on the chemical, biochemical and thermochemical waste-to-energy conversion processes applicable for food waste and an assessment of commercially available sustainable food waste-to-energy conversion technologies. Sustainability aspects, including consideration of environmental, economic and social impacts are also explored. The book concludes with an analysis of how deploying waste-to-energy systems is dependent on cross-cutting research methods, including geographical information systems and big data. It is a useful resource for professionals working in waste-to-energy technologies, as well as those in the food industry and food waste management sector planning and implementing these systems, but is also ideal for researchers, graduate students, energy policymakers and energy analysts interested in the most recent advances in the field. Provides guidance on how specific food waste characteristics drive possible waste-to-energy conversion processes Presents methodologies for selecting among different waste-to-energy options, based on waste volumes, distribution and properties, local energy demand (electrical/thermal/steam), opportunities for industrial symbiosis, regulations and incentives and social acceptance, etc. Contains tools to assess potential environmental and economic performance of deployed systems Links to publicly available resources on food waste data for energy conversion
Download or read book Advanced Technology for the Conversion of Waste into Fuels and Chemicals written by Anish Khan and published by Woodhead Publishing. This book was released on 2021-07-27 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Volume 1: Biological Processes presents advanced and combined techniques that can be used to convert waste to energy, including combustion, gasification, paralysis, anaerobic digestion and fermentation. The book focuses on solid waste conversion to fuel and energy and presents the latest advances in the design, manufacture, and application of conversion technologies. Contributors from the fields of physics, chemistry, metallurgy, engineering and manufacturing present a truly trans-disciplinary picture of the field. Chapters cover important aspects surrounding the conversion of solid waste into fuel and chemicals, describing how valuable energy can be recouped from various waste materials. As huge volumes of solid waste are produced globally while huge amounts of energy are produced from fossil fuels, the technologies described in this comprehensive book provide the information necessary to pursue clean, sustainable power from waste material. Presents the latest advances in waste to energy techniques for converting solid waste to valuable fuel and energy Brings together contributors from physics, chemistry, metallurgy, engineering and the manufacturing industry Includes advanced techniques such as combustion, gasification, paralysis, anaerobic digestion and fermentation Goes far beyond municipal waste, including discussions on recouping valuable energy from a variety of industrial waste materials Describes how waste to energy technologies present an enormous opportunity for clean, sustainable energy
Download or read book Waste to Energy written by Abd El-Fatah Abomohra and published by Springer Nature. This book was released on 2022-02-08 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the needs of students, researchers, as well as engineers and other professionals or readers interested in recent advances of biofuel and efficient waste management. In the context of energy consumption, over 85% of the total consumed energy comes from non-renewable fossil resources. Developing new renewable energy resources, especially biofuel production from wastes, has received increasing attention. The book is organized into three sections, namely Section I: Conventional waste management; Section II: From waste to green energy; and Section III: Case studies and future perspectives. Each section presents topic-specific chapters, which contain comprehensive and advanced knowledge of the subjects. Overall, the book covers the recent advances, breakthroughs, challenges, and future perspectives of waste-to-energy approach using different kinds of wastes as a feedstock for alternative biofuels and other integrated approaches such as wastewater treatment, plastic degradation, and CO2 sequestration in a cost-effective and eco-friendly way. In addition, different routes of waste recycling for enhanced biofuel production and case studies are presented with environmental and economic analysis. The presented case studies and future perspectives under Section III complement the chapters as they are authored by experts from bioenergy businesses who actually encounter real-world problems.
Download or read book Advances in Waste to Energy Technologies written by Rajeev Pratap Singh and published by CRC Press. This book was released on 2019-11-14 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: As global populations continue to increase, the application of biotechnological processes for disposal and control of waste has gained importance in recent years. Advances in Waste-to-Energy Technologies presents the latest developments in the areas of solid waste management, Waste-to-Energy (WTE) technologies, biotechnological approaches, and their global challenges. It combines biotechnological procedures, sophisticated modeling, and techno-economic analysis of waste, and examines the current need for the maximum recovery of energy from wastes as well as the associated biotechnological and environmental impacts. Features: Presents numerous waste management practices and methods to recover resources from waste using the best biotechnological approaches available. Addresses the challenges, management, and policy issues of waste management and WTE initiatives. Includes practical case studies from around the world. Serves as a useful resource for professionals and students involved in cross-disciplinary and trans-disciplinary research programs and related courses. Discusses the economic and regulatory contexts for managing waste. This book will serve as a valuable reference for researchers, academicians, municipal authorities, government bodies, waste managers, building engineers, and environmental consultants requiring an understanding of waste management and the latest WTE technologies.
Download or read book Energy from Waste written by Paul Breeze and published by Academic Press. This book was released on 2017-10-27 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy from Waste is a concise, up-to-date and accessible guide on how to create power from both urban and industrial waste. The book explores the types of waste that, instead of going to landfill, can be converted to energy, also discussing the most up-to-date technologies for doing so. The book contains a strong emphasis on the related environmental impacts and economic factors involved in the various methods of generating electricity, making this a valuable and insightful read for those involved in the management and conversion of waste, including energy engineers, managers and technicians. Explores both urban and industrial waste, its composition and how it is collected, enabling readers to better understand which power generation technologies can be used to convert it into power Discusses the most up-to-date technologies, along with the impacts they have on the environment, including solid residue, chemicals and dust from the flue-gas treatment (and the flue gas itself) Evaluates the economic impact of converting energy from waste and implementing and managing waste plants
Download or read book Energy from Waste written by Ram K. Gupta and published by CRC Press. This book was released on 2022-03-28 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conversion of waste into value-added products such as energy transforms a potential environmental problem into a sustainable solution. Energy from Waste: Production and Storage focuses on the conversion of waste from various sources for use in energy production and storage applications. It provides the state-of-the-art in developing advanced materials and chemicals for energy applications using wastes and discusses the various treatment processes and technologies. Covers synthesis of usable materials from various types of waste and their application in energy production and storage Presents an overview and applications of wastes for green energy production and storage Provides fundamentals of electrochemical behavior and understanding of energy devices such as fuel cells, batteries, supercapacitors, and solar cells Elaborates on advanced technologies used to convert waste into green biochemical energy This work provides new direction to scientists, researchers, and students in materials and chemical engineering and related subjects seeking to sustainable solutions to energy production and waste management.
Download or read book Waste to energy written by Eduardo Jacob-Lopes and published by . This book was released on 2018-12-13 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale gas is natural gas that is tightly locked within low permeability sedimentary rock. Recent technological advances are making shale gas reserves increasingly accessible and their recovery more economically feasible. This resource is already being exploited in South Africa, China, the United States and Canada. Shale gas is being produced in large volumes, and will likely be developed in coming years on every continent except Antarctica. Depending on factors such as future natural gas prices and government regulations, further development of shale gas resources could potentially span many decades and involve the drilling of tens of thousands of hydraulically fractured horizontal wells. This development is changing long-held expectations about oil and gas resource availability; several observers have characterized it as a game changer. Abundant, close to major markets, and relatively inexpensive to produce, shale gas represents a major new source of fossil energy. However, the rapid expansion of shale gas development over the past decade has occurred without a corresponding investment in monitoring and research addressing the impacts on the environment, public health, and communities. The primary concerns are the degradation of the quality of groundwater and surface water (including the safe disposal of large volumes of wastewater); the risk of increased greenhouse gas (GHG) emissions (including fugitive methane emissions during and after production), thus exacerbating anthropogenic climate change; disruptive effects on communities and land; and adverse effects on to human health. Other concerns include the local release of air contaminants and the potential for triggering small- to moderate-sized earthquakes in seismically active areas. These concerns will vary by region. The shale gas regions can be found near urban areas, presenting a large diversity in their geology, hydrology, land uses, and population density. The phrase environmental impacts from shale gas development masks many regional differences that are essential to understanding these impacts.
Download or read book Waste to Energy Conversion Technology written by Naomi B Klinghoffer and published by Elsevier. This book was released on 2013-05-15 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing global consumerism and population has led to an increase in the levels of waste produced. Waste to energy (WTE) conversion technologies can be employed to convert residual wastes into clean energy, rather than sending these wastes directly to landfill. Waste to energy conversion technology explores the systems, technology and impacts of waste to energy conversion. Part one provides an introduction to WTE conversion and reviews the waste hierarchy and WTE systems options along with the corresponding environmental, regulatory and techno-economic issues facing this technology. Part two goes on to explore further specific aspects of WTE systems, engineering and technology and includes chapters on municipal solid waste (MSW) combustion plants and WTE systems for district heating. Finally, part three highlights pollution control systems for waste to energy technologies. Waste to energy conversion technology is a standard reference book for plant managers, building engineers and consultants requiring an understanding of WTE technologies, and researchers, scientists and academics interested in the field. Reviews the waste hierarchy and waste to energy systems options along with the environmental and social impact of WTE conversion plants Explores the engineering and technology behind WTE systems including considerations of municipal solid waste (MSW) its treatment, combustion and gasification Considers pollution control systems for WTE technologies including the transformation of wast combustion facilities from major polluters to pollution sinks
Download or read book Current Developments in Biotechnology and Bioengineering written by Sunil Kumar and published by Elsevier. This book was released on 2019-01-03 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Developments in Biotechnology and Bioengineering: Waste Treatment Processes for Energy Generation provides extensive research on the role of waste management processes/technologies for energy generation. The enormous increase of waste materials generated by human activity and its potentially harmful effects on the environment and public health have led to an increasing awareness of an urgent need to adopt scientific methods for the safe disposal of wastes. This book outlines the basic knowledge, processes and technologies for the generation of energy from waste and functions as an important reference for academics and practitioners at varying levels of interest and knowledge. The book's content encompasses all issues for energy recovery from waste in a very clear and simple manner, acting as a comprehensive resource for anyone seeking an understanding on the topic. Outlines the latest technologies used for waste conversion into energy and facilitates project evaluation based on these technologies Summarizes the pros and cons of various processes Includes case studies and economic analysis
Download or read book Municipal Solid Waste to Energy Conversion Processes written by Gary C. Young and published by John Wiley & Sons. This book was released on 2010-11-29 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: MUNICIPAL SOLID WASTE TO ENERGY CONVERSION PROCESSES A TECHNICAL AND ECONOMIC REVIEW OF EMERGING WASTE DISPOSAL TECHNOLOGIES Intended for a wide audience ranging from engineers and academics to decision-makers in both the public and private sectors, Municipal Solid Waste to Energy Conversion Processes: Economic, Technical, and Renewable Comparisons reviews the current state of the solid waste disposal industry. It details how the proven plasma gasification technology can be used to manage Municipal Solid Waste (MSW) and to generate energy and revenues for local communities in an environmentally safe manner with essentially no wastes. Beginning with an introduction to pyrolysis/gasification and combustion technologies, the book provides many case studies on various waste-to-energy (WTE) technologies and creates an economic and technical baseline from which all current and emerging WTE technologies could be compared and evaluated. Topics include: Pyrolysis/gasification technology, the most suitable and economically viable approach for the management of wastes Combustion technology Other renewable energy resources including wind and hydroelectric energy Plasma economics Cash flows as a revenue source for waste solids-to-energy management Plant operations, with an independent case study of Eco-Valley plant in Utashinai, Japan Extensive case studies of garbage to liquid fuels, wastes to electricity, and wastes to power ethanol plants illustrate how currently generated MSW and past wastes in landfills can be processed with proven plasma gasification technology to eliminate air and water pollution from landfills.
Download or read book Waste to Energy written by Lisa Branchini and published by Springer. This book was released on 2015-06-02 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of state-of-the-art technologies for energy conversion from waste, as well as a much-needed guide to new and advanced strategies to increase Waste-to-Energy (WTE) plant efficiency. Beginning with an overview of municipal solid waste production and disposal, basic concepts related to Waste-To-Energy conversion processes are described, highlighting the most relevant aspects impacting the thermodynamic efficiency of WTE power plants. The pervasive influences of main steam cycle parameters and plant configurations on WTE efficiency are detailed and quantified. Advanced hybrid technology applications, particularly the Hybrid Combined Cycle concept, are examined in detail, including an illuminating compare-and-contrast study of two basic types of hybrid dual-fuel combined cycle arrangements: steam/water side integrated HCC and windbox repowering.
Download or read book Advances in Construction and Demolition Waste Recycling written by F Pacheco Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants Reviews key steps in handling construction and demolition waste
Download or read book Up to Date Waste to Energy Approach written by Petr Stehlik and published by Springer. This book was released on 2016-02-05 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Putting forward an up-to-date waste-to-energy approach that combines experience, sophisticated modeling and technical-economic analysis, this book examines the current need for the maximum utilization of energy from waste and the associated environmental impacts. It outlines step-by-step procedures for a complex and original waste-to-energy approach from the idea to its industrial application. With waste incinerators and industrial plants producing large amounts of pollutants, municipalities as well as smaller decentralized operations are beginning to focus on waste research. The principal advantage of utilizing research findings is the ability to apply a complex approach “from idea to industrial implementation” with respect to the needs of the market established by thorough market analysis. This book builds on this concept with an original approach that takes into consideration geographical aspects, the specifics of regions/micro-regions and technological units and/or equipment. Key areas discussed and analyzed in the text include: strategic planning of energy-source locations according to the nature of the respective region or microregion; types and amounts of wastes; logistics etc. using original mathematical models; consideration of on-site processing of various types of waste, taking into account the character of the region (agricultural, industrial etc.); tailor-made technologies for energy recovery from various types of wastes; implementation of individual technologies with original elements; and support for environmental protection based on advanced flue gas (i.e. off-gas in the case of incineration) cleaning methods.
Download or read book Waste Incineration and Public Health written by National Research Council and published by National Academies Press. This book was released on 2000-10-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incineration has been used widely for waste disposal, including household, hazardous, and medical wasteâ€"but there is increasing public concern over the benefits of combusting the waste versus the health risk from pollutants emitted during combustion. Waste Incineration and Public Health informs the emerging debate with the most up-to-date information available on incineration, pollution, and human healthâ€"along with expert conclusions and recommendations for further research and improvement of such areas as risk communication. The committee provides details on: Processes involved in incineration and how contaminants are released. Environmental dynamics of contaminants and routes of human exposure. Tools and approaches for assessing possible human health effects. Scientific concerns pertinent to future regulatory actions. The book also examines some of the social, psychological, and economic factors that affect the communities where incineration takes place and addresses the problem of uncertainty and variation in predicting the health effects of incineration processes.
Download or read book Advanced Technology for the Conversion of Waste Into Fuels and Chemicals written by Anish Khan and published by Elsevier. This book was released on 2021-07-29 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Volume 2: Chemical Processes is the second of two volumes by the editors (the first volume is Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Biological Processes). This volume presents advanced techniques and combined techniques used to convert energy to waste, including combustion, gasification, paralysis, anaerobic digestion and fermentation. The title focuses on solid waste conversion to fuel and energy, presenting advances in the design, manufacture and application of conversion technologies. Contributors from physics, chemistry, metallurgy, engineering and manufacturing present a truly trans-disciplinary picture of waste to energy conversion. Huge volumes of solid waste are produced globally while, at the same time, huge amounts of energy are produced from fossil fuels. Waste to energy (WTE) technologies are developing rapidly, holding out the potential to make clean, sustainable power from waste material. These WTE procedures incorporate various methods and blended approaches, and present an enormous opportunity for clean, sustainable energy. Presents the latest advances in waste to energy techniques for converting solid waste to valuable fuel and energy Brings together contributors from physics, chemistry, metallurgy, engineering and the manufacturing industry Includes advanced techniques such as combustion, gasification, paralysis, anaerobic digestion and fermentation Goes far beyond municipal waste, including the recouping of valuable energy from a variety of industrial waste materials
