Download or read book Advanced Stirling Convertor ASC E2 characterization testing written by Zachary D. Williams and published by . This book was released on 2012 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Stirling Convertor Characterization Testing written by Zachary D. Williams and published by BiblioGov. This book was released on 2013-06 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Testing has been conducted on Advanced Stirling Convertor (ASC-E2) convertors at NASA Glenn Research Center in support of the Advanced Stirling Radioisotope Generator (ASRG) Project. This testing has been conducted to understand sensitivities of convertor parameters due to environmental and operational changes during operation of the ASRG in missions to space. This paper summarizes test results and explains in terms of operation of the ASRG during space missions.
Download or read book Advanced stirling convertor ASC E2 performance testing at NASA Glenn Research Center written by Salvatore Oriti and published by . This book was released on 2011 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Stirling Convertor Performance Testing at Nasa Glenn Research Center written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) has been supporting development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG Project is providing life, reliability, and performance testing of the Advanced Stirling Convertor (ASC). For this purpose, four pairs of ASCs capable of operating to 850 C and designated with the model number ASC-E2, were delivered by Sunpower of Athens, Ohio, to GRC in 2010. The ASC-E2s underwent a series of tests that included workmanship vibration testing, performance mapping, and extended operation. Workmanship vibration testing was performed following fabrication of each convertor to verify proper hardware build. Performance mapping consisted of operating each convertor at various conditions representing the range expected during a mission. Included were conditions representing beginning-of-mission (BOM), end-of-mission (EOM), and fueling. This same series of tests was performed by Sunpower prior to ASC-E2 delivery. The data generated during the GRC test were compared to performance before delivery. Extended operation consisted of a 500-hr period of operation with conditions maintained at the BOM point. This was performed to demonstrate steady convertor performance following performance mapping. Following this initial 500-hr period, the ASC-E2s will continue extended operation, controller development and special durability testing, during which the goal is to accumulate tens of thousands of hours of operation. Data collected during extended operation will support reliability analysis. Performance data from these tests is summarized in this paper.
Download or read book Stirling Convertor Regenerators written by Mounir B. Ibrahim and published by CRC Press. This book was released on 2016-04-19 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stirling Convertor Regenerators addresses the latest developments and future possibilities in the science and practical application of Stirling engine regenerators and technology. Written by experts in the vanguard of alternative energy, this invaluable resource presents integral scientific details and design concepts associated with Stirling conve
Download or read book Lateral Load Testing of the Advanced Stirling Convertor Heater Head written by Peggy A. Cornell and published by BiblioGov. This book was released on 2013-06 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free-piston Stirling convertors are fundamental to the development of NASA s next generation of radioisotope power system, the Advanced Stirling Radioisotope Generator (ASRG). The ASRG will use General Purpose Heat Source (GPHS) modules as the energy source and Advanced Stirling Convertors (ASCs) to convert heat into electrical energy, and is being developed by Lockheed Martin under contract to the Department of Energy. Achieving flight status mandates that the ASCs satisfy design as well as flight requirements to ensure reliable operation during launch. To meet these launch requirements, GRC performed a series of quasi-static mechanical tests simulating the pressure, thermal, and external loading conditions that will be experienced by an ASC-E2 heater head assembly. These mechanical tests were collectively referred to as "lateral load tests" since a primary external load lateral to the heater head longitudinal axis was applied in combination with the other loading conditions. The heater head was subjected to the operational pressure, axial mounting force, thermal conditions, and axial and lateral launch vehicle acceleration loadings. To permit reliable prediction of the heater head s structural performance, GRC completed Finite Element Analysis (FEA) computer modeling for the stress, strain, and deformation that will result during launch. The heater head lateral load test directly supported evaluation of the analysis and validation of the design to meet launch requirements. This paper provides an overview of each element within the test and presents assessment of the modeling as well as experimental results of this task.
Download or read book Evaluation of Advanced Stirling Convertor Net Heat Input Correlation Methods Using a Thermal Standard written by Nasa Technical Reports Server (Ntrs) and published by BiblioGov. This book was released on 2013-07 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two high-efficiency Advanced Stirling Convertors (ASCs), developed by Sunpower Inc. and NASA Glenn Research Center (GRC). The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot end and cold end temperatures, and specified electrical power output for a given net heat input. In an effort to improve net heat input predictions, numerous tasks have been performed which provided a more accurate value for net heat input into the ASCs, including testing validation hardware, known as the Thermal Standard, to provide a direct comparison to numerical and empirical models used to predict convertor net heat input. This validation hardware provided a comparison for scrutinizing and improving empirical correlations and numerical models of ASC-E2 net heat input. This hardware simulated the characteristics of an ASC-E2 convertor in both an operating and non-operating mode. This paper describes the Thermal Standard testing and the conclusions of the validation effort applied to the empirical correlation methods used by the Radioisotope Power System (RPS) team at NASA Glenn.
Download or read book Evaluation of Advanced Stirling Convertor Net Heat Input Correlation Methods Using a Thermal Standard written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2019-01-18 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two high-efficiency Advanced Stirling Convertors (ASCs), developed by Sunpower Inc. and NASA Glenn Research Center (GRC). The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot end and cold end temperatures, and specified electrical power output for a given net heat input. In an effort to improve net heat input predictions, numerous tasks have been performed which provided a more accurate value for net heat input into the ASCs, including testing validation hardware, known as the Thermal Standard, to provide a direct comparison to numerical and empirical models used to predict convertor net heat input. This validation hardware provided a comparison for scrutinizing and improving empirical correlations and numerical models of ASC-E2 net heat input. This hardware simulated the characteristics of an ASC-E2 convertor in both an operating and non-operating mode. This paper describes the Thermal Standard testing and the conclusions of the validation effort applied to the empirical correlation methods used by the Radioisotope Power System (RPS) team at NASA Glenn. Briggs, Maxwell H. and Schifer, Nicholas A. Glenn Research Center NASA/TM-2012-217293, AIAA Paper 2011-5578, E-17829
Download or read book Advanced Stirling Convertor Dual Convertor Controller Testing at NASA Glenn Research Center in the Radioisotope Power Systems System Integration Laboratory written by Gina M. Dugala and published by . This book was released on 2015 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Stirling Convertor ASC Technology Maturation written by Wayne A. Wong and published by . This book was released on 2016 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Stirling Convertor Durability Testing written by David W. Meer and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radioisotope Power Systems written by National Research Council and published by National Academies Press. This book was released on 2009-08-14 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spacecraft require electrical energy. This energy must be available in the outer reaches of the solar system where sunlight is very faint. It must be available through lunar nights that last for 14 days, through long periods of dark and cold at the higher latitudes on Mars, and in high-radiation fields such as those around Jupiter. Radioisotope power systems (RPSs) are the only available power source that can operate unconstrained in these environments for the long periods of time needed to accomplish many missions, and plutonium-238 (238Pu) is the only practical isotope for fueling them. Plutonium-238 does not occur in nature. The committee does not believe that there is any additional 238Pu (or any operational 238Pu production facilities) available anywhere in the world.The total amount of 238Pu available for NASA is fixed, and essentially all of it is already dedicated to support several pending missions-the Mars Science Laboratory, Discovery 12, the Outer Planets Flagship 1 (OPF 1), and (perhaps) a small number of additional missions with a very small demand for 238Pu. If the status quo persists, the United States will not be able to provide RPSs for any subsequent missions.
Download or read book Advanced Stirling Convertor durability testing written by David W. Meer and published by . This book was released on 2012 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Test hardware design for flightlike operation of Advanced Stirling Convertors ASC E3 written by Salvatore M. Oriti and published by . This book was released on 2012 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance of an Advanced Stirling Convertor Based on Heat Flux Sensor Measurements written by Scott D. Wilson and published by BiblioGov. This book was released on 2013-06 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two high-efficiency Advanced Stirling Convertors (ASCs), developed by Sunpower, Inc., and NASA Glenn Research Center. The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot-end and cold-end temperatures, and specified electrical power output for a given heat input. It is difficult to measure heat input to Stirling convertors due to the complex geometries of the hot components, temperature limits of sensor materials, and invasive integration of sensors. A thin-film heat flux sensor was used to directly measure heat input to an ASC. The effort succeeded in designing and fabricating unique sensors, which were integrated into a Stirling convertor ground test and exposed to test temperatures exceeding 700 C in air for 10,000 hr. Sensor measurements were used to calculate thermal efficiency for ASC-E (Engineering Unit) #1 and #4. The post-disassembly condition of the sensors is also discussed.
Download or read book Advanced Stirling Converter Dual Converter Controller Testing at NASA Glenn Research Center in the Radioisotope Power Systems System Integration Laboratory written by Gina M. Dugala and published by . This book was released on 2015 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Measurement of Advanced Stirling Convertors ASC E3 written by Salvatore M. Oriti and published by . This book was released on 2013 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
