Download or read book Simulation Modeling and Analysis with Expertfit Software written by Averill Law and published by McGraw-Hill Science/Engineering/Math. This book was released on 2006-07-21 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition in 1982, the goal of Simulation Modeling and Analysis has always been to provide a comprehensive, state-of-the-art, and technically correct treatment of all important aspects of a simulation study. The book strives to make this material understandable by the use of intuition and numerous figures, examples, and problems. It is equally well suited for use in university courses, simulation practice, and self study. The book is widely regarded as the “bible” of simulation and now has more than 100,000 copies in print. The book can serve as the primary text for a variety of courses; for example: • A first course in simulation at the junior, senior, or beginning-graduate-student level in engineering, manufacturing, business, or computer science (Chaps. 1 through 4, and parts of Chaps. 5 through 9). At the end of such a course, the students will be prepared to carry out complete and effective simulation studies, and to take advanced simulation courses. • A second course in simulation for graduate students in any of the above disciplines (most of Chaps. 5 through 12). After completing this course, the student should be familiar with the more advanced methodological issues involved in a simulation study, and should be prepared to understand and conduct simulation research. • An introduction to simulation as part of a general course in operations research or management science (part of Chaps. 1, 3, 5, 6, and 9).

Download or read book Marine Engineers Review written by and published by . This book was released on 1999 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.

Download or read book Fairplay written by and published by . This book was released on 2000 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Simulation written by Jerry Banks and published by John Wiley & Sons. This book was released on 1998-09-14 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch ist eine unschätzbare Informationsquelle für alle Ingenieure, Designer, Manager und Techniker bei Entwicklung, Studium und Anwendung einer großen Vielzahl von Simulationstechniken. Es vereint die Arbeit internationaler Simulationsexperten aus Industrie und Forschung. Alle Aspekte der Simulation werden in diesem umfangreichen Nachschlagewerk abgedeckt. Der Leser wird vertraut gemacht mit den verschiedenen Techniken von Industriesimulationen sowie mit Einsatz, Anwendungen und Entwicklungen. Neueste Fortschritte wie z.B. objektorientierte Programmierung werden ebenso behandelt wie Richtlinien für den erfolgreichen Umgang mit simulationsgestützten Prozessen. Auch gibt es eine Liste mit den wichtigsten Vertriebs- und Zulieferadressen. (10/98)

Download or read book Simulation Modeling and Analysis with ARENA written by Tayfur Altiok and published by Elsevier. This book was released on 2010-07-26 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation Modeling and Analysis with Arena is a highly readable textbook which treats the essentials of the Monte Carlo discrete-event simulation methodology, and does so in the context of a popular Arena simulation environment. It treats simulation modeling as an in-vitro laboratory that facilitates the understanding of complex systems and experimentation with what-if scenarios in order to estimate their performance metrics. The book contains chapters on the simulation modeling methodology and the underpinnings of discrete-event systems, as well as the relevant underlying probability, statistics, stochastic processes, input analysis, model validation and output analysis. All simulation-related concepts are illustrated in numerous Arena examples, encompassing production lines, manufacturing and inventory systems, transportation systems, and computer information systems in networked settings. - Introduces the concept of discrete event Monte Carlo simulation, the most commonly used methodology for modeling and analysis of complex systems - Covers essential workings of the popular animated simulation language, ARENA, including set-up, design parameters, input data, and output analysis, along with a wide variety of sample model applications from production lines to transportation systems - Reviews elements of statistics, probability, and stochastic processes relevant to simulation modeling

Download or read book Designing Virtual Worlds written by Richard A. Bartle and published by New Riders. This book was released on 2004 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a comprehensive treatment of virtual world design from one of its pioneers. It covers everything from MUDs to MOOs to MMORPGs, from text-based to graphical VWs.

Download or read book Product Design and Development written by Karl T. Ulrich and published by Irwin/McGraw-Hill. This book was released on 2004 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents a set of product development techniques aimed at bringing together the marketing, design, and manufacturing functions of the enterprise. The integrative methods facilitate problem-solving and decision-making.

Download or read book Naval Engineers Journal written by and published by . This book was released on 1994 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simio and Simulation Modeling Analysis Applications written by Jeffrey S. Smith and published by Createspace Independent Publishing Platform. This book was released on 2017-05-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book opens up the world of simulation to you by providing the basics of general simulation techonology, identifying the skills needed for successful simulation projects, and introducting a state-of-the-art simulation package." --

Download or read book Flight Simulation written by Alfred T. Lee and published by Routledge. This book was released on 2017-03-02 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in computer, visual display, motion and force cueing and other technologies in the past two decades have had a dramatic effect on the design and use of simulation technology in aviation and other fields. The effective use of technology in training, safety investigation, engineering and scientific research requires an understanding of its capabilities and limitations. As the technology has as its primary goal the creation of virtual environments for human users, knowledge of human sensory, perceptual, and cognitive functioning is also needed. This book provides a review and analysis of the relevant engineering and science supporting the design and use of advanced flight simulation technologies. It includes chapters reviewing key simulation areas such as visual scene, motion, and sound simulation and a chapter analyzing the role of recreating the pilot's task environment in the overall effectiveness of simulators. The design and use of flight simulation are addressed in chapters on the effectiveness of flight simulators in training and on the role of physical and psychological fidelity in simulator design. The problems inherent in the ground-based simulation of flight are also reviewed as are promising developments in flight simulation technology and the important role flight simulators play in advanced aviation research. The readership includes: flight simulation engineers and designers, human factors researchers and practitioners, aviation safety investigators, flight training management and instructors, training and instructional technologists, virtual environment design community, and regulatory authorities.

Download or read book New York Magazine written by and published by . This book was released on 1990-08-06 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: New York magazine was born in 1968 after a run as an insert of the New York Herald Tribune and quickly made a place for itself as the trusted resource for readers across the country. With award-winning writing and photography covering everything from politics and food to theater and fashion, the magazine's consistent mission has been to reflect back to its audience the energy and excitement of the city itself, while celebrating New York as both a place and an idea.

Download or read book Engineering Principles of Combat Modeling and Distributed Simulation written by Andreas Tolk and published by John Wiley & Sons. This book was released on 2012-03-20 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the military and combat applications of modeling and simulation Engineering Principles of Combat Modeling and Distributed Simulation is the first book of its kind to address the three perspectives that simulation engineers must master for successful military and defense related modeling: the operational view (what needs to be modeled); the conceptual view (how to do combat modeling); and the technical view (how to conduct distributed simulation). Through methods from the fields of operations research, computer science, and engineering, readers are guided through the history, current training practices, and modern methodology related to combat modeling and distributed simulation systems. Comprised of contributions from leading international researchers and practitioners, this book provides a comprehensive overview of the engineering principles and state-of-the-art methods needed to address the many facets of combat modeling and distributed simulation and features the following four sections: Foundations introduces relevant topics and recommended practices, providing the needed basis for understanding the challenges associated with combat modeling and distributed simulation. Combat Modeling focuses on the challenges in human, social, cultural, and behavioral modeling such as the core processes of "move, shoot, look, and communicate" within a synthetic environment and also equips readers with the knowledge to fully understand the related concepts and limitations. Distributed Simulation introduces the main challenges of advanced distributed simulation, outlines the basics of validation and verification, and exhibits how these systems can support the operational environment of the warfighter. Advanced Topics highlights new and developing special topic areas, including mathematical applications fo combat modeling; combat modeling with high-level architecture and base object models; and virtual and interactive digital worlds. Featuring practical examples and applications relevant to industrial and government audiences, Engineering Principles of Combat Modeling and Distributed Simulation is an excellent resource for researchers and practitioners in the fields of operations research, military modeling, simulation, and computer science. Extensively classroom tested, the book is also ideal for courses on modeling and simulation; systems engineering; and combat modeling at the graduate level.

Download or read book Software Modeling and Design written by Hassan Gomaa and published by Cambridge University Press. This book was released on 2011-02-21 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all you need to know to model and design software applications from use cases to software architectures in UML and shows how to apply the COMET UML-based modeling and design method to real-world problems. The author describes architectural patterns for various architectures, such as broker, discovery, and transaction patterns for service-oriented architectures, and addresses software quality attributes including maintainability, modifiability, testability, traceability, scalability, reusability, performance, availability, and security. Complete case studies illustrate design issues for different software architectures: a banking system for client/server architecture, an online shopping system for service-oriented architecture, an emergency monitoring system for component-based software architecture, and an automated guided vehicle for real-time software architecture. Organized as an introduction followed by several short, self-contained chapters, the book is perfect for senior undergraduate or graduate courses in software engineering and design, and for experienced software engineers wanting a quick reference at each stage of the analysis, design, and development of large-scale software systems.

Download or read book Simulations and the Future of Learning written by Clark Aldrich and published by John Wiley & Sons. This book was released on 2003-10-27 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulations and the Future of Learning offers trainers and educators the information and perspective they need to understand, design, build, and deploy computer simulations for this generation. Looking back on his recent first-hand experience as lead designer for an advanced leadership development simulation, author Clark Aldrich has created a detailed case study of the creation and deployment of an e-learning simulation that had the development cycle of a modern computer game. With this book Aldrich, a leader in the e-learning field, has created an intriguing roadmap for the future of learning while taking us along on an entertaining rollercoaster ride of trial and error, success and failure. Simulations and the Future of Learning outlines the design principles and critical decisions around any simulation's components— the interface, the physics and animation systems, the artificial intelligence, and sets and figures. Using this accessible resource, readers will learn how to create and evaluate successful simulations that have the following characteristics: authentic and relevant scenarios; applied pressure situations that tap user's emotion and force them to act; a sense of unrestricted options; and replayability.

Download or read book Virtual Reality and Technologies for Combat Simulation written by and published by . This book was released on 1994-01-01 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes applications of synthetic-environment technologies in simulating combat. It traces technology development from the 1929 Link Trainer through the SAGE air defense system, the first head-mounted display, and the Defense Advanced Research Projects Agency's SIMNET simulator networking project. It describes technical challenges and discusses current issues, such as validation.

Download or read book How to Differentiate Instruction in Mixed ability Classrooms written by Carol A. Tomlinson and published by ASCD. This book was released on 2001 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a definition of differentiated instruction, and provides principles and strategies designed to help teachers create learning environments that address the different learning styles, interests, and readiness levels found in a typical mixed-ability classroom.