Download or read book Advanced Materials written by Shun-Hsyung Chang and published by Springer Science & Business Media. This book was released on 2014-03-25 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are the basis of modern science and technology. This proceedings volume presents a broad spectrum of studies of novel materials covering their processing techniques, physics, mechanics, and applications. The book is concentrated on nanostructures, ferroelectric crystals, materials and composites, materials for solar cells and also polymeric composites. Nanotechnology approaches, modern piezoelectric techniques and also latest achievements in materials science, condensed matter physics, mechanics of deformable solids and numerical methods are presented. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media etc. The characteristics of materials and composites with improved properties opening new possibilities of various physical processes, in particular transmission and receipt of signals under water, are described.

Download or read book Advanced Materials Polymers and Composites written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2021-11-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews several domains of polymer science, especially new trends in polymerization synthesis, physical-chemical properties, and inorganic systems. Composites and nanocomposites are also covered in this book, emphasizing nanotechnologies and their impact on the enhancement of physical and mechanical properties of these new materials. Kinetics and simulation are discussed and also considered as promising techniques for achieving chemistry and predicting physical property goals. This book presents a selection of interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research.

Download or read book Science and Technology of Polymers and Advanced Materials written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2019-09-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing interest in lightweight and high-performance materials is leading to significant research activity in the area of polymers and composites. One recent focus is to develop multifunctional materials that have more than one property tailored as to the specified design requirements, in addition to achieving low density. The possibility of simultaneously tailoring several desired properties is attractive but very challenging, and it requires significant advancement in the science and technology of high-performance functional polymers and composites. This volume presents a selection of new approaches in the field of composites and nanomaterials, polymer synthesis and applications, and materials and their properties. Some composites/nanocomposites and interfaces are explored as well, some with medical applications. The authors also look at simulations and modeling, synthesis involving photochemistry, self-assembled hydrogels, and sol-gel processing.

Download or read book Advanced Materials Research written by Stanislav Kolisnychenko and published by Trans Tech Publications Ltd. This book was released on 2018-11-13 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only

Download or read book Composites and Advanced Materials for Industrial Applications written by Kumar, K. and published by IGI Global. This book was released on 2018-05-25 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase their applications across different industries. Composites and Advanced Materials for Industrial Applications is a critical scholarly resource that examines recent advances in the field of application of composite materials. Featuring coverage on a broad range of topics such as nanocomposites, hybrid composites, and fabrication techniques, this book is a vital reference source for engineers, academics, researchers, students, professionals, and practitioners seeking current research on improvements in manufacturing processes and developments of new analytical and testing methods.

Download or read book Combustion Synthesis of Advanced Materials written by Boris B. Khina and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to describe basic approaches to modelling non-isothermal interaction kinetics during CS of advanced materials and reveal the existing controversies and apparent contradictions between different theories, on one hand, and between theory and experimental data, on the other hand, and to develop criteria for a transition from traditional solid-state diffusion-controlled phase formation kinetics (a "slow", quasi-equilibrium interaction pathway) to non-equilibrium, "fast" dissolution-precipitation route.

Download or read book Materials written by Witold Brostow and published by John Wiley & Sons. This book was released on 2016-09-06 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a fully interdisciplinary approach with a stronger emphasis on polymers and composites than traditional materials books Materials science and engineering is an interdisciplinary field involving the properties of matter and its applications to various areas of science and engineering. Polymer materials are often mixed with inorganic materials to enhance their mechanical, electrical, thermal, and physical properties. Materials: Introduction and Applications addresses a gap in the existing textbooks on materials science. This book focuses on three Units. The first, Foundations, includes basic materials topics from Intermolecular Forces and Thermodynamics and Phase Diagrams to Crystalline and Non-Crystalline Structures. The second Units, Materials, goes into the details of many materials including Metals, Ceramics, Organic Raw Materials, Polymers, Composites, Biomaterials, and Liquid Crystals and Smart Materials. The third and final unit details Behavior and Properties including Rheological, Mechanical, Thermophysical, Color and Optical, Electrical and Dielectric, Magnetic, Surface Behavior and Tribology, Materials, Environment and Sustainability, and Testing of Materials. Materials: Introduction and Applications features: Basic and advanced Materials concepts Interdisciplinary information that is otherwise scattered consolidated into one work Links to everyday life application like electronics, airplanes, and dental materials Certain topics to be discussed in this textbook are more advanced. These will be presented in shaded gray boxes providing a two-level approach. Depending on whether you are a student of Mechanical Engineering, Electrical Engineering, Engineering Technology, MSE, Chemistry, Physics, etc., you can decide for yourself whether a topic presented on a more advanced level is not important for you—or else essential for you given your professional profile Witold Brostow is Regents Professor of Materials Science and Engineering at the University of North Texas. He is President of the International Council on Materials Education and President of the Scientific Committee of the POLYCHAR World Forum on Advanced Material (42 member countries). He has three honorary doctorates and is a Member of the European Academy of Sciences, Member of the National Academy of Sciences of Mexico, Foreign Member of the National Academy of Engineering of Georgia in Tbilisi and Fellow of the Royal Society of Chemistry in London. His publications have been cited more than 7200 times. Haley Hagg Lobland is the Associate Director of LAPOM at the University of North Texas. She is a Member of the POLYCHAR Scientific Committeee. She has received awards for her research presented at conferences in: Buzios, Rio de Janeiro, Brazil; NIST, Frederick, Maryland; Rouen, France; and Lviv, Ukraine. She has lectured in a number of countries including Poland and Spain. Her publications include joint ones with colleagues in Egypt, Georgia, Germany, India, Israel, Mexico, Poland, Turkey and United Kingdom.

Download or read book Advanced Materials for Energy and Environmental Applications written by Sunghoon Park and published by . This book was released on 2020-09-28 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials for energy and environmental applications (such as rapid heating, anti-fouling/anti-virus surface, chemical sensor, textile/stretchable sensor, fuel cell, and lithium-ion batteries) have been extensively investigated in the academic and industrial fields. The advent of cabon-based nano-materials (carbon nanotubes, graphene, and carbon black) and inonganic nano-materials (Ag wire/particles, Cu mesh, and transition metal dichalcogenide) has accelerated research interest in energy and environmental applications. This book is focused on the emerging concept and improvement of energy and environmental basic research, as well as in the characterization and analysis of novel energy and environmental base materials. The contents of the book are as below: - Theoretical and experimental studies on advanced conducting nanocomposites; - Electrical properties of nanocomposites under various conditions (dynamic mode, aspect ratio, alignment, and contents) and its applications; - Advanced material for energy applications; - Analysis and materials for environmental applications.

Download or read book Green and Sustainable Advanced Materials Volume 2 written by Shakeel Ahmed and published by John Wiley & Sons. This book was released on 2018-10-08 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable development is a very prevalent concept of modern society. This concept has appeared as a critical force in combining a special focus on development and growth by maintaining a balance of using human resources and the ecosystem in which we are living. The development of new and advanced materials is one of the powerful examples in establishing this concept. Green and sustainable advanced materials are the newly synthesized material or existing modified material having superior and special properties. These fulfil today’s growing demand for equipment, machines and devices with better quality for an extensive range of applications in various sectors such as paper, biomedical, textile, and much more. Volume 2, provides chapters on the valorization of green and sustainable advanced materials from a biomedical perspective as well as the applications in textile technology, optoelectronics, energy materials systems, and the food and agriculture industry.

Download or read book Advanced Materials and Techniques for Biosensors and Bioanalytical Applications written by Pranab Goswami and published by CRC Press. This book was released on 2020-11-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioanalytical science and its technological subdomain, biosensors, are ever-evolving subjects, striving for rapid improvement in terms of performance and expanding the target range to meet the vast societal and market demands. The key performance factors for a biosensor that drive the research are selectivity, sensitivity, response time, accuracy, and reproducibility, with additional requirements of its portability and inexpensive nature. These performance factors are largely governed by the materials and techniques being used in these bioanalytical platforms. The selection of materials to meet these requirements is critical, as their interaction or involvement with the biological recognition elements should initiate or improve these performance factors. The technique discussed primarily applies to transducers involved in converting a biochemical signal to optical or electrical signals. Over the years, the emergence of novel materials and techniques has drastically improved the performance of these bioanalytical systems, enabling them to expand their analytical horizon. These advanced materials and techniques are central to modern bioanalytical and biosensor research. Advanced Materials and Techniques for Biosensors and Bioanalytical Applications provides a comprehensive review of the subject, including a knowledge platform for both academics and researchers. Considering biosensors as a central theme to this book, an outline on this subject with background principles has been included, with a scope of extending the utility of the book to coursework in graduate and postgraduate schools. Features: • Basic principles on different classes of biosensors, recent advances and applications • Smart materials for biosensors and other rapid, portable detection devices • Metal nanoparticles and nanocrystals for analytical applications • Carbon-based nanoparticles and quantum dots for sensing applications • Nanozymes as potential catalysts for sensing applications • Bioelectrochemiluminescence and photoelectrochemical-based biosensors • Paper electronics and paper-based biosensors • Microbial biosensors: artificial intelligence, genetic engineering, and synthetic biology • Biofuel cells as a signal transduction platform • FET-based biosensors, including ISFET and BioFET This book serves as a reference for scientific investigators and a textbook for a graduate-level course in biosensors and advanced bioanalytical techniques.

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2015-12-14 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume presents selected and peer reviewed 50 reports of the 2015 International Conference on “Physics and Mechanics of New Materials and Their Applications” (Azov, Russia, 19-22 May, 2015), devoted to 100th Anniversary of the Southern Federal University, Russia. The book presents processing techniques, physics, mechanics, and applications of advanced materials. The book is concentrated on some nanostructures, ferroelectric crystals, materials and composites and other materials with specific properties. In this book are presented nanotechnology approaches, modern piezoelectric techniques, physical and mechanical studies of the structure-sensitive properties of the materials. A wide spectrum of mathematical and numerical methods is applied to the solution of different technological, mechanical and physical problems for applications. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in a large scale of temperatures and pressure ranges, aggressive media, etc. The characteristics of materials and composites with improved properties is shown, and new possibilities in studying of various physico-mechanical processes and phenomena are demonstrated.

Download or read book Advanced Materials Research Trends written by Levan V. Basbanes and published by Nova Publishers. This book was released on 2007 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials can be defined in numerous ways; the broadest definition is to refer to all materials that represent advances over the traditional materials that have been used for hundreds or even thousands of years. From this perspective advanced materials refer to all new materials and modifications to existing materials to obtain superior performance in one or more characteristics that are critical for the application under consideration. A more insightful and focused approach to advanced materials is to consider materials that are early in their product and/or technology lifecycle. In other words, there is significant room for growth in terms of the improvement of the performance characteristics (technology lifecycle) and their product lifecycle. The book presents new and important research in the field.

Download or read book Advanced Materials and Processing written by Federal Coordinating Council for Science, Engineering, and Technology. Committee on Industry and Technology and published by . This book was released on 1993 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials written by Mahendra U. Gaikwad and published by CRC Press. This book was released on 2024-12-06 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are engineered to exhibit novel properties that confer superior performance in comparison with conventional materials. The performance of advanced materials is associated with toughness, hardness, and durability that can be used for high technological applications such as semiconductors, biomaterials, smart materials, or nanomaterials. Advanced Materials: Production, Characterization and Multidisciplinary Applications is focused on novel approaches for production of graphene and other 2D materials along with characterization techniques, discussing a wide range of applications in multidisciplinary areas of science and engineering. It provides a guiding light in the production, synthesis, and characterization of advanced materials by implementing appropriate techniques. The book has a multidisciplinary approach covering applications in electronics (sensors), engineering, biotechnology, medical (e.g., cancer treatment, drug delivery, cellular imaging), and biomedical (smart implants, drug delivery, and DIY health testing kits) fields. The authors cover the primary information of advanced and other 2D materials related to their production or synthesis via various methods, ranging from conventional to non‐conventional – such as lithography, photolithography (computer chips), electron beam lithography, etching, atomic layer deposition, chemical vapor deposition, hydrothermal process, and electrospinning, along with some comparative investigations. It also covers a comparison study over the current and future perspectives of advanced and other 2D materials. This book is aimed at researchers, academics, and professionals who are interested in understanding the novel approaches for synthesis of advanced materials.

Download or read book Advanced Materials Source Book written by Jon Binner and published by Elsevier. This book was released on 2013-10-22 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials Source Book 1994-1995 presents the developments in the field of advanced materials. This book provides information regarding materials and products, legislation, patents, advances in processing and equipment, standards, and testing procedures. Organized into four chapters, this book begins with an overview of the international market trends, specific materials, or materials groups and appliances. This text then examines the applications and makes market projections on a wide range of specialty materials, including ceramics, biomaterials, electronic materials, and optical materials. Other chapters consider the healthy nature of predictions concerning Japan and parts of Europe, stating that Germany and Japan will lead the advanced structural ceramics market. This book discusses as well the developments concerning various materials. The final chapter presents a list of contact details for the organizations listed in the main text to allow the readers to make new contacts or to follow-up items of particular interest. This book is a valuable resource for private consumers.

Download or read book Materials Research and Technology Initiatives written by and published by . This book was released on 1995 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines materials research programs across all operating Administrations within the U.S. Department of Transportation. It is the department's first report on ongoing and planned research and technology efforts in advanced materials. The report was published in support of the Administration's initiative to establish an integrated program of research designed to enhance the performance and longevity of the Nation's transportation infrastructure. It is intended to provide the department's customers with a consolidated report of materials-related research projects. The report highlights opportunities for joint research and near-term applications of advanced materials technologies.

Download or read book Application of Artificial Intelligence in New Materials Discovery written by Inamuddin and published by Materials Research Forum LLC. This book was released on 2023-07-05 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with the use of Artificial Intelligence in the discovery, production and application of new engineering materials. Topics covered include nano-robots. data mining, solar energy systems, materials genomics, polymer manufacturing, and energy conversion issues. Keywords: Artificial Intelligence, Mathematical Models, Machine Learning, Artificial Neural Networks, Bayesian Analysis, Vector Machines, Heuristics, Crystal Structure, Component Prediction, Process Optimization, Density Functional Theory, Monitoring, Classification, Nano-Robots, Data Mining, Solar Photovoltaics, Renewable Energy Systems, Alternative Energy Sources, Material Genomics, Polymer Manufacturing, Energy Conversion.