Download or read book Adhesion in Foods written by Amos Nussinovitch and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: To the layman, adhesion is a simple matter of how well two different materials stick together, and adhesion measurements provide some indication of the force required to separate them. However, a more detailed look at adhesion shows that it is a very important feature of food throughout its manufacturing, packaging and storage. Chapters are fully devoted to the fascinating topic of adhesion in foods. Key features of the book include, but are not limited to: definition and nomenclature of adhesion; adhesion mechanisms and measurements; stickiness in various foods and its relation to technological processes; perception of stickiness; hydrocolloids as adhesive agents for foods; adhesion phenomena in coated, battered, breaded and fried foods; electrostatic adhesion in foods; multilayered adhered food products, and adhesion of substances to packaging and cookware. Adhesion in Foods: Fundamental Principles and Applications is dedicated not only to the academic community but also to the broader population of industrialists and experimentalists who will find it to be not only a source of knowledge, but also a launching pad for novel ideas and inventions. In particular, this book is expected to be of interest to personnel involved in food formulation, food scientists, food technologists, industrial chemists and engineers, and those working in product development.

Download or read book Manual of the International List of Causes of Death written by United States. Bureau of the Census and published by . This book was released on 1913 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adhesion in Microelectronics written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings

Download or read book Handbook of Adhesion Promoters written by George Wypych and published by Elsevier. This book was released on 2023-02-07 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Adhesion Promoters, Second Edition outlines known mechanisms, principles of use, and the applications of different groups of adhesion promoters, along with a discussion of the mechanisms that cause adhesion loss, such as corrosion, delamination, detachment, liquid penetration and peeling. Surface condition and treatment are also discussed, including different methods (cleaning, mechanical, plasma, microwave, flame, corona discharge, laser, UV, and chemical modification) for practical applications. Formulation of typical primers used in the application of adhesives, sealants, coatings, coil coatings, cosmetics, metal, optical devices, polymers and plastics are covered, with over 50 primer formulations provided. In addition, a full chapter is dedicated to the subject of polymer modification for improved adhesion, a method frequently used instead of the addition of adhesion promoters. The book's final chapters contain information on available evaluation and selection of adhesion promoters that work with different polymers (29), products (28), and those that help to prevent corrosion. Provides detailed, essential data on adhesion promoters, including additives that are both widely used and recently introduced Covers critical aspects involved in the application of adhesion promoters Discusses mechanisms that result in adhesion loss, primer formulation, polymer modification for improved adhesion, and surface treatment methods Supports readers in the selection of adhesion promoters, including detailed information on adhesion promoter properties, applications and their potential

Download or read book Adhesion Molecules in Allergic Disease written by Bruce S. Bochner and published by CRC Press. This book was released on 2020-08-18 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique resource-the first book of its kind exclusively devoted to the subject-offers timely coverage of the cells, mechanisms, and proteins involved in allergic inflammation, emphasizing the latest advances in local cell recruitment.

Download or read book Bacterial Adhesion written by M. Fletcher and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study of the phenomena of bacterial adhesion to surfaces has accelerated considerably over the past 10 to 15 years. During this period, microbiologists have become increasingly aware that attachment to a substratum influences considerably the activities and structures of microbial cells. Moreover, in many cases attached communities of cells have important effects on their substratum and the surrounding environment. Such phenomena are now known to be important in plant and animal hosts, water and soil ecosystems, and man-made structures and industrial processes. Much work on microbial adhesion in the early 1970s was descriptive. Those studies were important for detecting and describing the phenomena of bacterial adhesion to substrata in various environments; the findings have been presented in numerous recently published, excellent books and reviews. In some studies, attempts were made to elucidate some funda mental principles controlling adhesion processes in different environments containing a variety of microorganisms. Common threads have been observed occasionally in different studies. Taken as a whole, however, the information has revealed that many disparate factors are involved in adhesion processes. Whether a particular microorganism can adhere to a certain substratum depends on the properties of the microbial strain itself and on charac teristics of the substratum and of the environment.

Download or read book First International Congress on Adhesion Science And Technology invited Papers written by W. J. Van Ooij and published by VSP. This book was released on 1998-12 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven parts: Part 1: Fundamental aspects of adhesion and general topics; Part 2: Contact angle, wettability and surface energetics; Part 3: Surface modification: Relevance to adhesion; Part 4: Adhesives and adhesive joints; Part 5: Adhesion aspects of polymeric coatings, and polymer-polymer interphase; Part 6: Metal-polymer and metal-ceramic adhesion; and Part 7: General papers. The topics covered include many different aspects of adhesion science and technology, and both fundamental and applied issues are addressed. The final section of this volume gives a listing of titles, authors and affiliations of the other 185 papers which were included in the technical program of the conference.

Download or read book Adhesion and Bonding to Polyolefins written by D. M. Brewis and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefins have many and varied applications. However, they have very poor bonding properties. This review discusses ways of improving adhesion and bonding. It describes the theories surrounding adhesion of polyolefins and the analysis techniques which have been used to characterise the material surfaces. Methods of enhancing adhesion are then discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.

Download or read book Treatise on Adhesion and Adhesives written by Minford and published by CRC Press. This book was released on 1991-02-25 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now edited by J. Dean Minford, a noted researcher in the field, Volume 7 of the Treatise on Adhesion and Adhesives presents complete coverage of commercially preferred adhesives and surface pre-treatments for joining wood and wood derivatives, rubbers and elastomers, plastics and titanium. Originally published in 1991.

Download or read book Rapra written by and published by iSmithers Rapra Publishing. This book was released on 1983 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.

Download or read book Organic Coatings written by Frank N. Jones and published by John Wiley & Sons. This book was released on 2017-08-30 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to organic coatings, thoroughly revised and updated—now with coverage of a range of topics not covered in previous editions Organic Coatings: Science and Technology, Fourth Edition offers unparalleled coverageof organic coatings technology and its many applications. Written by three leading industry experts (including a new, internationally-recognized coatings scientist) it presents a systematic survey of the field, revises and updates the material from the previous edition, and features new or additional treatment of such topics as superhydrophobic, ice-phobic, antimicrobial, and self-healing coatings; sustainability, artist paints, and exterior architectural primers. making it even more relevant and useful for scientists and engineers in the field, as well as for students in coatings courses. The book incorporates up-to-date coverage of recent developments in the field with detailed discussions of the principles underlying the technology and their applications in the development, production, and uses of organic coatings. All chapters in this new edition have been updated to assure consistency and to enable extensive cross-referencing. The material presented is also applicable to the related areas of printing inks and adhesives, as well as areas within the plastics industry. This new edition Completely revises outdated chapters to ensure consistency and to enable extensive cross-referencing Correlates the empirical technology of coatings with the underlying science throughout Provides expert troubleshooting guidance for coatings scientists and technologists Features hundreds of illustrative figures and extensive references to the literature A new, internationally-recognized coatings scientist brings fresh perspective to the content. Providing a broad overview for beginners in the field of organic coatings and a handy reference for seasoned professionals, Organic Coatings: Science and Technology, Fourth Edition, gives you the information and answers you need, when you need them.

Download or read book Adhesion 93 written by M. R. Bowditch and published by . This book was released on 1993 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adhesive Joining of Structural Components written by Alessandro Pegoretti and published by SAE International. This book was released on 2018-08-09 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding has been used in the manufacture of primary aircraft fuselage and wing structures by various constructors since 1945. By a proper design, adhesive bonding often helps in designing structures mechanically equivalent to or even stronger than conventional assemblies. Adhesive Joining of Structural Components: New Insights and Technologies introduces the reader to some recent progress involved in adhesive joining of structural components. The chapters, seminal SAE International technical papers, cover the most recent advances in adhesive materials, surface preparation and controls, innovative bonding technologies, hybrid bonded/bolted joints, non-destructive testing and failure modelling of adhesively bonded joints. Edited by Dr. Alessandro Pegoretti, Professor of Materials Science and Technology at the University of Trento, Italy, Adhesive Joining of Structural Components: New Insights and Technologies is a must-read resource for those interested in the field of adhesive joining of structural components, which will assume an increasingly important role in designing and manufacturing lightweight structures. In fact, recent advancements in adhesives, methods for surface preparation and control, bonding technologies, non-destructive testing and modelling of failure mechanisms will certainly contribute to revitalize this relatively "mature" assembling technique.

Download or read book Advances in Structural Adhesive Bonding written by David A. Dillard and published by Elsevier. This book was released on 2023-06-10 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Structural Adhesive Bonding, Second Edition reviews developments in adhesive bonding for a range of advanced structural engineering applications. This new edition has been fully revised to include the latest advances in materials, testing and modeling methods, lifecycle considerations, and industrial implementation. Sections review advances in commonly used groups of structural adhesives, covering epoxy, acrylic, anaerobic and cyanoacrylate, polyurethane, and silicone adhesives, along with toughening. Other chapters cover various types of adherends and pre-treatment methods for structural materials, including metals, plastics, composites, wood and joint design and testing, including topics such as fracture mechanics, life prediction techniques, and advanced testing methods. This is a valuable guide for all those working with structural adhesives, including those in an industrial setting, adhesive specialists, structural engineers, design engineers, R&D professionals, and scientists, as well as academic researchers and advanced students in adhesives, joining technology, materials science and mechanical engineering. Provides detailed coverage on the main adhesive groups, including epoxy, acrylic, cyanoacrylate, polyurethane and silicone adhesives Includes the latest developments across adherends, pre-treatment methods, joint design and testing, durability and lifecycle related issues Addresses environmental challenges, adhesive specification, quality control, and risk mitigation for specific industrial application areas

Download or read book Handbook of Bacterial Adhesion written by Yuehuei H. An and published by Springer Science & Business Media. This book was released on 2000-01-21 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on bacterial adhesion and its significance is a major field involving many different aspects of nature and human life, such as marine science, soil and plant ecology, most importantly, the biomedical field. The adhesion ofbacteria to the food industry, and human tissue surfaces and implanted biomaterial surfaces is an important step in the patho genesis of infection. Handbook 0/ Bacterial Adhesion: Principles, Methods, and Applications is an outgrowth of the editors' own quest for information on laboratory techniques for studying bacte rial adhesion to biomaterials, bone, and other tissues and, more importantly, a response to significant needs in the research community. This book is designed to be an experimental guide for biomedical scientists, biomaterials scientists, students, laboratory technicians, or anyone who plans to conduct bacterial adhesion studies. More specifically, it is intended for all those researchers facing the chal lenge of implant infections in such devices as orthopedic prostheses, cardiovascular devices or catheters, cerebrospinal fluid shunts or extradural catheters, thoracic or abdominal catheters, portosystemic shunts or bile stents, urological catheters or stents, plastic surgical implants, oral or maxillofacial implants, contraceptive implants, or even contact lenses. It also covers research methods for the study of bacterial adhesion to tis sues such as teeth, respiratory mucosa, intestinal mucosa, and the urinary tract. In short, it constitutes a handbook for biomechanical and bioengineering researchers and students at all levels.

Download or read book The Role of Surface Modification on Bacterial Adhesion of Bio implant Materials written by Santhosh Kumar S and published by CRC Press. This book was released on 2020-08-09 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Surface Modification on Bacterial Adhesion of Bio-implant Materials: Machining, Characterization, and Applications, explores the relationship between the surface roughness of artificial implants used for hard tissue replacement and their bacterial adhesion. It summarizes the reason for the failure of implants, the mechanisms of bacterial formation on implant surfaces, and the fundamental and established methods of implant surface modification techniques. It provides readers with an organized and rational representation about implant manufacturing and mechanical surface modification. It also explores the use of developed unidirectional abrasive flow finishing processes to finish biomaterials at the nano-level. It is an invaluable guide for academics, graduate students, biomaterial scientists, and manufacturing engineers researching implants, related infections, and implant manufacturing. Key Features: Explores implant related infections Discusses surface modification techniques Contains information on the mechanical finishing processes and complete guide on developed cutting edge unidirectional abrasive flow finishing technology