Download or read book Active Biomass and Aeration Parameter Estimation for an Activated Sludge Plant Using State Observer Methods written by B O. Sodipo and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Estimation of Heterotrophic Active Biomass in Activated Sludge Systems Using Respirometry written by Hyungmo Moon and published by . This book was released on 2005 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book State and Parameter Estimation of Nitrification in an Oxygen Activated Sludge Process written by Paul Brandt Butler and published by . This book was released on 1982 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature
Download or read book On line Estimation and Adaptive Control of Bioreactors written by G. Bastin and published by Elsevier. This book was released on 2013-10-22 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with monitoring and control of biotechnological processes. Different methods are proposed which are based on the nonlinear structure of the process and do not require any a priori knowledge of the fermentation parameters. The theoretical stability and convergence properties of the proposed algorithms are analysed and their performances are illustrated by simulation results and, in many instances, by real life experiments. The concept of software sensors is introduced; these are algorithms based on the nonlinear model of the process and designed for on-line estimation of the biological variables and/or the fermentation parameters. In order to deal with process nonstationarities and parameter uncertainties, reference is made to adaptive estimation and control techniques.The book is the result of an intensive joint research effort by the authors during the last decade. It is intended as a graduate level text for students of bioengineering as well as a reference text for scientists and engineers involved in the design and optimization of bioprocesses.
Download or read book Activated Sludge written by Wesley Eckenfelder and published by CRC Press. This book was released on 1998-08-04 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Process Theory Kinetics and Sludge Quality Control: Activated Sludge Process - Process Theory - Activated Sludge Separation Problems - References Activated Sludge Treatment of Municipal Wastewater U.S.A. Practice: General Approach - Clarifier Design - Aeration Tank (Reactor) Design - Appurtenance Design - Configurations - ReferencesEurope
Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22
Download or read book Innovative Wastewater Treatment Resource Recovery Technologies Impacts on Energy Economy and Environment written by Juan M. Lema and published by IWA Publishing. This book was released on 2017-06-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.
Download or read book The MBR Book written by Simon Judd and published by Elsevier. This book was released on 2011-04-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MBR Book
Download or read book System Identification written by Karel J. Keesman and published by Springer Science & Business Media. This book was released on 2011-05-16 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Identification shows the student reader how to approach the system identification problem in a systematic fashion. The process is divided into three basic steps: experimental design and data collection; model structure selection and parameter estimation; and model validation, each of which is the subject of one or more parts of the text. Following an introduction on system theory, particularly in relation to model representation and model properties, the book contains four parts covering: • data-based identification – non-parametric methods for use when prior system knowledge is very limited; • time-invariant identification for systems with constant parameters; • time-varying systems identification, primarily with recursive estimation techniques; and • model validation methods. A fifth part, composed of appendices, covers the various aspects of the underlying mathematics needed to begin using the text. The book uses essentially semi-physical or gray-box modeling methods although data-based, transfer-function system descriptions are also introduced. The approach is problem-based rather than rigorously mathematical. The use of finite input–output data is demonstrated for frequency- and time-domain identification in static, dynamic, linear, nonlinear, time-invariant and time-varying systems. Simple examples are used to show readers how to perform and emulate the identification steps involved in various control design methods with more complex illustrations derived from real physical, chemical and biological applications being used to demonstrate the practical applicability of the methods described. End-of-chapter exercises (for which a downloadable instructors’ Solutions Manual is available from fill in URL here) will both help students to assimilate what they have learned and make the book suitable for self-tuition by practitioners looking to brush up on modern techniques. Graduate and final-year undergraduate students will find this text to be a practical and realistic course in system identification that can be used for assessing the processes of a variety of engineering disciplines. System Identification will help academic instructors teaching control-related to give their students a good understanding of identification methods that can be used in the real world without the encumbrance of undue mathematical detail.
Download or read book Nutrient Criteria Technical Guidance Manual written by and published by . This book was released on 2000 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wastewater Treatment and Reuse Technologies written by Faisal Ibney Hai and published by MDPI. This book was released on 2018-08-27 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Wastewater Treatment and Reuse Technologies" that was published in Applied Sciences
Download or read book The Effects of Artificial Aeration on Lake Ecology written by Arlo W. Fast and published by . This book was released on 1972 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Water Utilities written by Pernille Ingildsen and published by IWA Publishing. This book was released on 2016-05-15 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today there is increasing pressure on the water infrastructure and although unsustainable water extraction and wastewater handling can continue for a while, at some point water needs to be managed in a way that is sustainable in the long-term. We need to handle water utilities “smarter”. New and effective tools and technologies are becoming available at an affordable cost and these technologies are steadily changing water infrastructure options. The quality and robustness of sensors are increasing rapidly and their reliability makes the automatic handling of critical processes viable. Online and real-time control means safer and more effective operation. The combination of better sensors and new water treatment technologies is a strong enabler for decentralised and diversified water treatment. Plants can be run with a minimum of personnel attendance. In the future, thousands of sensors in the water utility cycle will handle all the complexity in an effective way. Smart Water Utilities: Complexity Made Simple provides a framework for Smart Water Utilities based on an M-A-D (Measurement-Analysis-Decision). This enables the organisation and implementation of “Smart” in a water utility by providing an overview of supporting technologies and methods. The book presents an introduction to methods and tools, providing a perspective of what can and could be achieved. It provides a toolbox for all water challenges and is essential reading for the Water Utility Manager, Engineer and Director and for Consultants, Designers and Researchers.
Download or read book Process Design Manual for Nitrogen Control written by United States. Environmental Protection Agency. Office of Technology Transfer and published by . This book was released on 1975 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biochar for Environmental Management written by Johannes Lehmann and published by Routledge. This book was released on 2012-05-16 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biochar is the carbon-rich product when biomass (such as wood, manure or crop residues) is heated in a closed container with little or no available air. It can be used to improve agriculture and the environment in several ways, and its stability in soil and superior nutrient-retention properties make it an ideal soil amendment to increase crop yields. In addition to this, biochar sequestration, in combination with sustainable biomass production, can be carbon-negative and therefore used to actively remove carbon dioxide from the atmosphere, with major implications for mitigation of climate change. Biochar production can also be combined with bioenergy production through the use of the gases that are given off in the pyrolysis process. This book is the first to synthesize the expanding research literature on this topic. The book's interdisciplinary approach, which covers engineering, environmental sciences, agricultural sciences, economics and policy, is a vital tool at this stage of biochar technology development. This comprehensive overview of current knowledge will be of interest to advanced students, researchers and professionals in a wide range of disciplines.
Download or read book PID Control written by Tamer Mansour and published by BoD – Books on Demand. This book was released on 2011-04-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The PID controller is considered the most widely used controller. It has numerous applications varying from industrial to home appliances. This book is an outcome of contributions and inspirations from many researchers in the field of PID control. The book consists of two parts; the first is related to the implementation of PID control in various applications whilst the second part concentrates on the tuning of PID control to get best performance. We hope that this book can be a valuable aid for new research in the field of PID control in addition to stimulating the research in the area of PID control toward better utilization in our life.
