Download or read book Acoustic Scanning Probe Microscopy written by Francesco Marinello and published by Springer Science & Business Media. This book was released on 2012-10-04 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of atomic force microscopy with ultrasonic methods allows the nearfield detection of acoustic signals. The nondestructive characterization and nanoscale quantitative mapping of surface adhesion and stiffness or friction is possible. The aim of this book is to provide a comprehensive review of different scanning probe acoustic techniques, including AFAM, UAFM, SNFUH, UFM, SMM and torsional tapping modes. Basic theoretical explanations are given to understand not only the probe dynamics but also the dynamics of tip surface contacts. Calibration and enhancement are discussed to better define the performance of the techniques, which are also compared with other classical techniques such as nanoindentation or surface acoustic wave. Different application fields are described, including biological surfaces, polymers and thin films.
Download or read book Advances in Acoustic Microscopy written by Andrew Briggs and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of Advances in Acoustic Microscopy. It continues the aim of presenting applications and developments of techniques that are related to high-resolution acoustic imaging. We are very grateful to the authors who have devoted considerable time to preparing these chapters, each of which describes a field of growing importance. Laboratories that have high-performance acoustic microscopes are frequently asked to examine samples for which the highest available resolution is not necessary, and the ability to penetrate opaque layers is more significant. Such applications can be thought of as bridging the gap be tween acoustic microscopy at low gigahertz frequencies, and on the one hand nondestructive testing of materials at low megahertz frequencies and on the other hand medical ultrasonic imaging at low megahertz frequencies. Commercial acoustic microscopes are becoming increasingly available and popular for such applications. We are therefore delighted to be able to begin the volume with chapters from each of those two fields. The first chapter, by Gabriele Pfannschmidt, describes uses of acoustic microscopy in the semiconductor industry. It provides a splendid balance to the opening chapter of Volume 1, which came from a national research center, being written from within a major European electronics industry itself. Dr Pfann schmidt describes the use of two quite different types of acoustic microscopes, and points out the advantages of each for specific purposes.
Download or read book Acoustic Microscopy written by Andrew Briggs and published by Oxford University Press. This book was released on 2010 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years Acoustic Microscopy has been the definitive book on the subject. A key development since it was first published has been the development of ultrasonic force microscopy. The 2nd edition has a major new chapter on this technique and its applications.
Download or read book Applied Scanning Probe Methods XI written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2008-10-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volumes XI, XII and XIII examine the physical and technical foundation for recent progress in applied scanning probe techniques. These volumes constitute a timely comprehensive overview of SPM applications. Real industrial applications are included.
Download or read book Applied Scanning Probe Methods II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-02-21 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ningTunnelingMicroscopysignaled a new era in imaging. The sc- ning probes emerged as a new - strument for imaging with a p- cision suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the M- netic Force Microscope, MFM, and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.
Download or read book Optical Technologies in the Humanities written by Dieter Dirksen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: New high-tech developments in the field of optics show increasing applicability not only in classical technological fields but also in the humanities. This book contains selected contributions to an international, interdisciplinary joint conference on "New Technologies in the Humanities" and "Optics Within Life Sciences". Its objective is to forward interdisciplinary information and communication between specialists in optics, medicine, biology, environmental sciences, and cultural heritage. It is unique as a presentation of new optical technologies for cultural heritage protection.
Download or read book Design Modeling and Control of Nanopositioning Systems written by Andrew J. Fleming and published by Springer. This book was released on 2014-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the complete design cycle of nanopositioning systems, this is the first comprehensive text on the topic. The book first introduces concepts associated with nanopositioning stages and outlines their application in such tasks as scanning probe microscopy, nanofabrication, data storage, cell surgery and precision optics. Piezoelectric transducers, employed ubiquitously in nanopositioning applications are then discussed in detail including practical considerations and constraints on transducer response. The reader is then given an overview of the types of nanopositioner before the text turns to the in-depth coverage of mechanical design including flexures, materials, manufacturing techniques, and electronics. This process is illustrated by the example of a high-speed serial-kinematic nanopositioner. Position sensors are then catalogued and described and the text then focuses on control. Several forms of control are treated: shunt control, feedback control, force feedback control and feedforward control (including an appreciation of iterative learning control). Performance issues are given importance as are problems limiting that performance such as hysteresis and noise which arise in the treatment of control and are then given chapter-length attention in their own right. The reader also learns about cost functions and other issues involved in command shaping, charge drives and electrical considerations. All concepts are demonstrated experimentally including by direct application to atomic force microscope imaging. Design, Modeling and Control of Nanopositioning Systems will be of interest to researchers in mechatronics generally and in control applied to atomic force microscopy and other nanopositioning applications. Microscope developers and mechanical designers of nanopositioning devices will find the text essential reading.
Download or read book Applied Scanning Probe Methods II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-06-22 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ningTunnelingMicroscopysignaled a new era in imaging. The sc- ning probes emerged as a new - strument for imaging with a p- cision suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the M- netic Force Microscope, MFM, and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.
Download or read book Acoustic Scanning Probe Microscopy written by Francesco Marinello and published by Springer Science & Business Media. This book was released on 2012-10-04 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of atomic force microscopy with ultrasonic methods allows the nearfield detection of acoustic signals. The nondestructive characterization and nanoscale quantitative mapping of surface adhesion and stiffness or friction is possible. The aim of this book is to provide a comprehensive review of different scanning probe acoustic techniques, including AFAM, UAFM, SNFUH, UFM, SMM and torsional tapping modes. Basic theoretical explanations are given to understand not only the probe dynamics but also the dynamics of tip surface contacts. Calibration and enhancement are discussed to better define the performance of the techniques, which are also compared with other classical techniques such as nanoindentation or surface acoustic wave. Different application fields are described, including biological surfaces, polymers and thin films.
Download or read book An Introduction to Scanning Acoustic Microscopy written by Andrew Briggs and published by Oxford University Press, USA. This book was released on 1985 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date handbook provides a lucid introduction to acoustic microscopes with submicron resolution. The first half of the handbook shows how to operate the instrument, offering a description of a typical acoustic microscope, some detailed guidance for use, and a helpful discussion of the elements of contrast theory. The second half examines samples of the images that can be obtained, including micrographs of composites, grain structure, layered devices, and fine microcracks. The author has designed the book to help both those who have recently purchased an acoustic microscope and those who merely wish to find out if an acoustic microscope can help their research, whether it be in materials science, metallurgy, surface physics, or surface chemistry.
Download or read book Applied Scanning Probe Methods III written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-04-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ning Tunneling Microscopy sig- led a new era in imaging. The sc- ning probes emerged as a new i- trument for imaging with a pre- sion suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the - gneticForceMicroscope,MFM,and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.
Download or read book Scanning Probe Microscopy written by Laurene Tetard and published by American Chemical Society. This book was released on 2023-05-22 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of nanoscale functional imaging and spectroscopy have blossomed since the invention of scanning probe microscopy (SPM) tools, starting with scanning tunneling microscopy in the early 1980s. The ability to resolve topographical features with nanoscale—sometimes atomic—precision has revolutionized our understanding of molecules, matter, and living systems. These observations have led scientists to pose increasingly more complex questions about properties beyond morphology and their evolution upon external stimuli. Overall, SPM-based schemes provide versatile ways to probe structural, electrical, mechanical, and chemical properties of materials at the nanoscale. Getting started with SPM can be intimidating. This digital primer aims to provide undergraduate and graduate students majoring in various fields of science and engineering with a practical guide to grasp essential concepts and principles related to SPM image and spectra formation and their interpretation. This guide may also be helpful to researchers who are considering new ways of evaluating nanoscale properties of materials, devices, or living systems as applicable to their respective fields. Because of the extensive literature on the developments and applications of SPM, it was impossible to comprehensively cover all aspects of the field. Hence, deliberate choices were made to emphasize some techniques that have not been discussed as extensively in the literature but hold great promise to understand complex systems at the nanoscale.
Download or read book Applied Scanning Probe Methods I written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2014-02-26 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the physical and technical foundation for recent progress with this technique, Applied Scanning Probe Methods offers a timely and comprehensive overview of SPM applications, now that industrial applications span topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. First it lays the theoretical background of static and dynamic force microscopies, including sensor technology and tip characterization, contributions detail applications such as macro- and nanotribology, polymer surfaces, and roughness investigations. The final part on industrial research addresses special applications of scanning force nanoprobes such as atomic manipulation and surface modification, as well as single electron devices based on SPM.
Download or read book Scanning Probe Microscopy and Spectroscopy written by Roland Wiesendanger and published by Cambridge University Press. This book was released on 1994-09-29 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation and manipulation of matter on the atomic scale have been revolutionised by scanning tunnelling microscopy and related scanning probe techniques. This book is the first to provide a clear and comprehensive introduction to this subject. Beginning with the theoretical background of scanning tunnelling microscopy, the design and instrumentation of practical STM and associated systems are described in detail, as are the applications of these techniques in fields such as condensed matter physics, chemistry, biology, and nanotechnology. Containing 350 illustrations, and over 1200 references, this unique book represents an ideal introduction to the subject for final-year undergraduates in physics or materials science. It will also be invaluable to graduate students and researchers in any branch of science where scanning probe techniques are used.
Download or read book Acoustic Microscopy written by Roman Gr. Maev and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This only and up-to-date monograph on this versatile method covers its use in a range of applications spanning the fields of physics, materials science, electrical engineering, medicine, and research and industry. Following an introduction, the highly experienced author goes on to investigate acoustic field structure, output signal formation in transmission raster acoustic microscopes and non-linear acoustic effects. Further chapters deal with the visco-elastic properties and microstructure of the model systems and composites used, as well as polymer composite materials and the microstructure and physical-mechanical properties of biological tissues. A handy reference for materials scientists, electrical engineers, radiologists, laboratory medics, test engineers, physicists, and graduate students.
Download or read book Scanning Microscopy written by Rainer Kassing and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the invention of the scanning tunneling microscope in 1982 by Binnig and Rohrer and the subsequent award of the Nobel Prize, the field of scan ning microscopy was given a strong boost in view of its wide range of ap plications. In particular, expanding the capability to access nature's foundations at the atomic level is now recognized as having the potential for major impact in Infonnation Technology. This third volume of the ESPRIT Basic Research Series provides a well structured overview of the state of the art of scanning microscopy and re cent advances including results of ESPRIT Basic Research Actions 3109 and 3314. April 1992 G. Metakides Preface The IMO Symposium Fall '90, Wetzlar, FRO, October 1/2, 1990, brought together leading scientists and researchers in scanning microscopy from re search institutes and industries, each of whom was invited to contribute a lecture which was followed by a discussion. The resulting contributions are contained in this proceedings. Microscopic techniques are used not only for research work in material and life science but also for routine applications in almost any vital section of our everyday life. The demand for coming to a better understanding of materials and their behaviour under different conditions and environments as well as all aspects of human life initiated an ongoing development for improved microscopic techniques.
Download or read book Scanning Probe Microscopy written by Ernst Meyer and published by Springer Nature. This book was released on 2021-05-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by three leading experts in the field, this textbook describes and explains all aspects of the scanning probe microscopy. Emphasis is placed on the experimental design and procedures required to optimize the performance of the various methods. Scanning Probe Microscopy covers not only the physical principles behind scanning probe microscopy but also questions of instrumental designs, basic features of the different imaging modes, and recurring artifacts. The intention is to provide a general textbook for all types of classes that address scanning probe microscopy. Third year undergraduates and beyond should be able to use it for self-study or as textbook to accompany a course on probe microscopy. Furthermore, it will be valuable as reference book in any scanning probe microscopy laboratory. Novel applications and the latest important results are also presented, and the book closes with a look at the future prospects of scanning probe microscopy, also discussing related techniques in nanoscience. Ideally suited as an introduction for graduate students, the book will also serve as a valuable reference for practising researchers developing and using scanning probe techniques.
