Download or read book Aachen Forum on Gear Production Gears for Electromobility 9th 10th November 2023 written by Thomas Bergs and published by Apprimus Wissenschaftsverlag. This book was released on 2023-12-11 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gears have served as indispensable components across a spectrum of sectors, including automotive, aerospace, industrial applications or wind turbines, for many decades. However, increasing requirements and current market developments are constantly presenting the transmission technology industry with new challenges. In modern gear transmissions, competition extends beyond pricing and hinges on factors such as load-carrying capacity, operational reliability, and noise reduction performance. Modern transmission have to achieve high power density, low weight and minimal noise emissions. The current trend towards e-mobility, coupled with general ecological and economical challenges to improve resource efficiency, lead to increased demands on the entire process chain in gear production. At this year's Aachen Forum on Gear Production (AFGP), hosted by RWTH Aachen University's WZL in collaboration with the Research Association for Drive Technology (FVA), the central theme will revolve around the manufacturing of gears for use in e-mobility applications. The spectrum of topics ranges from process and tool design in line with requirements to the manufacturing of individual gear geometries and measures for continuous quality assurance. Additionally, the event will delve into areas related to digitalization and the advancement of sustainability in both gear production and its application.
Download or read book Aachen Forum on Gear Production written by Thomas Bergs and published by Apprimus Wissenschaftsverlag. This book was released on 2022-02-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although gears have been indispensable components in various sectors such as mechanical engineering, automotive engineering and industrial gear manufacturing for many decades, increasing requirements and current market developments are constantly presenting the transmission technology industries with new challenges. In modern gear transmissions, competition, besides the price, is determined by load-carrying capacity, operational reliability and noise excitation behavior. In the automotive industry in particular, reliable transmissions with high power density, low weight and minimal noise emissions are required. The current trend towards e-mobility, as well as general ecological and economical challenges to improve resource efficiency, lead to increased demands on gear quality and surface finish. In this context, the finishing and quality inspection of gears take on central roles. As the finishing of gears has a significant influence on their operational behavior, the reliability of the processes must be continuously ensured with regard to a high quality of the work result. Therefore, at this year's Aachen Forum on Gear Production, which is organized hand in hand by the WZL of RWTH Aachen University and the Research Association Transmission Technology (FVA), the focus is on finishing processes and quality inspection of gears. The spectrum of topics ranges from process and tool design in line with requirements to the manufacturing of individual gear geometries and measures for continuous quality assurance. Aspects of modern finishing processes for the generation of superfinished surfaces, quality inspection during production, and the economic efficiency of production and application are presented. The objective of the Aachen Forum on Gear Production is an exchange of knowledge and experience between engineers who are employed or have responsibility in the design, development, production, assembly, and application of gear drives. The individual technical presentations feature both manufacturers of machines and tools as well as users who report on their own practical experience. In addition, there are interesting presentations by research experts.
Download or read book Aachen Conference on Gear Production written by Thomas Bergs and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Production Research written by Robert Schmitt and published by Springer. This book was released on 2018-11-19 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present recent and highly relevant topics in the fields of production research as 3D printing, additive manufacturing processes, agile product development, change dynamics in companies, configurable material systems, data analysis in process optimization, future technologies with high potential in value creation, global production, learning production systems, production of the future, organization of assemblies, resource efficiency in production, robotics in assembly, and technology trends in machine tools. Researchers and practitioners in the field of mechanical engineering and production technology will benefit from this content.
Download or read book Advances in Gear Design and Manufacture written by Stephen P. Radzevich and published by CRC Press. This book was released on 2019-04-30 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Gear Design and Manufacture deals with gears, gear transmissions, and advanced methods of gear production.The book is focused on discussion of the latest discoveries and accomplishments in gear design and production, with chapters written by international experts in the field. Topics are aligned to meet the requirements of the modern scientific theory of gearing, providing readers precise knowledge and recommendations on how perfect gears and gear transmissions can be designed and produced, and how they work. It explains how gears and gear transmissions can be designed to reach high a “power-to-weight” ratio, and how to design and produce compact, high-capacity gearboxes.
Download or read book Advances in Production Research written by Robert Schmitt and published by Springer. This book was released on 2018-11-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume present recent and highly relevant topics in the fields of production research as 3D printing, additive manufacturing processes, agile product development, change dynamics in companies, configurable material systems, data analysis in process optimization, future technologies with high potential in value creation, global production, learning production systems, production of the future, organization of assemblies, resource efficiency in production, robotics in assembly, and technology trends in machine tools. Researchers and practitioners in the field of mechanical engineering and production technology will benefit from this content.
Download or read book Gears in Design Production and Education written by Natalya Barmina and published by Springer Nature. This book was released on 2021-05-31 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the fourth volume in the series devoted to gear engineering and computer-aided design, production, testing and education. It comprises fundamental and applied research contributions by scientists and gear experts from all the world and covers recent developments and historical achievements in various spheres of mechanical engineering related to different kinds of gears, transmissions, and drive systems. It gathers contributions describing the advanced approaches to research, design, testing and production of practically all common and new kinds of gears for a vast number of advanced applications. Special attention is paid to issues of higher education in the field of gears. The book is intended as a tribute to professor Veniamin Goldfarb (1941-2019), one of the world-known leaders in the field of gear research, education and production, who contributed much to the active international cooperation of gear experts and to promotion of MMS science. The introductory chapter of this book relates his research to major developments in the field of mechanisms and machine science and outlines important contributions that he made within the period of 1964-2019.
Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Nuno Pina and published by Springer Science & Business Media. This book was released on 2012-10-12 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes extended and revised versions of a set of selected papers from the 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2011) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Noordwijkerhout, The Netherlands. SIMULTECH 2011 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation and Simulation Team and held in cooperation with ACM Special Interest Group on Simulation and Modeling (ACM SIGSIM) and the AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS).
Download or read book New Approaches to Gear Design and Production written by Veniamin Goldfarb and published by Springer Nature. This book was released on 2020-01-25 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.
Download or read book International Conference Manufacturing Technology written by and published by . This book was released on 1967 with total page 1458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrative Production Technology written by Christian Brecher and published by Springer. This book was released on 2017-01-09 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students.
Download or read book Future Trends in Production Engineering written by Günther Schuh and published by Springer Science & Business Media. This book was released on 2012-08-15 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet and adapt to the current and future trends and issues in technology and society, the science committee of The German Academic Society for Production Engineering (WGP) continues to define future topics for production technology. These themes represent not only the key focus for the scientific work of the WGP, but also the central themes of the first annual conference in June 2011, whose paper is publically available in this volume. Such themes, including electric mobility, medical technology, lightweight construction, and resource efficiency, as well as mass production ability have all been identified as future, large-scale, and long-term drivers of change. Future trends influence changes sustainably and fundamentally; they permeate society, technology, economics, and value systems and have an effect in virtually all areas of life. The WGP has, as part of its research, established for itself the goal of not only observing these emerging changes, but also of supervising and influencing their development in order to ensure steady progress, secure sustainability, and shape the future.
Download or read book International Gear Conference 2014 26th 28th August 2014 Lyon written by Philippe Velex and published by Chandos Publishing. This book was released on 2014-09-18 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions. - A truly international contribution with more than 120 papers from all over the world - A judicious balance between fundamental research and industrial concerns - Participation of the most respected international experts in the field of gearing - A wide range of applications in terms of size, power, speed, and industrial sector
Download or read book Modern gear production written by H. J. Watson and published by . This book was released on 1970 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Design Engineering Technical Conferences written by and published by . This book was released on 2003 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internet of Production written by Christian Brecher and published by Springer Nature. This book was released on 2024-01-30 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seminal compendium, available through open access, illuminates the forefront of digital collaboration in production. It introduces the visionary concept of the Internet of Production (IoP), an ambitious initiative by Germany's esteemed Cluster of Excellence at RWTH Aachen University. This handbook pioneers the integration of data, models, and knowledge across development, production, and user cycles, offering interdisciplinary insights into production technology's horizons with the overall objective to create a worldwide lab. The work is organized into seven key parts, each contributing to a comprehensive understanding of the IoP. Part I lays the foundation with interdisciplinary visions and concepts. Part II delves into IoP's infrastructure, encompassing digital shadows and actionable artificial intelligence. Part III examines materials within the digitalized production landscape. Part IV confronts the challenges and potentials of production processes under novel digitalization methods. Part V focuses on production management with data-driven decision support, while Part VI explores agile development processes. Finally, Part VII delves into the interplay between internal and external perspectives in the IoP, human-centered work design, and platform-based ecosystems. Supported by the German Research Foundation (DFG), this compendium redefines manufacturing through the transformative IoP lens. Embrace this scholarly endeavor to embrace technological advancement. This is an open access book.
Download or read book Theory of Gearing written by Stephen P. Radzevich and published by CRC Press. This book was released on 2022-11-29 with total page 1193 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1) Demonstrates the rigorous scientific theory behind optimal gear design, manufacture, and performance 2) Details cutting edge research on gear design since the previous edition, enabling engineers to cost effectively make efficient and sustainable gears 3) Discusses approximate gearing, along with algorithms for gear design and performance 4) Aids the reader in designing noiseless gears which feature the highest possible power density at the lowest possible manufacturing costs
