Download or read book A Working Party Report on Predicting CO2 Corrosion in the Oil and Gas Industry written by and published by Ashgate Publishing. This book was released on 1994-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on CO2 Corrosion Control in Oil and Gas Production written by Liane M. Smith and published by Woodhead Publishing Limited. This book was released on 1997 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.

Download or read book A Working Party Report on Predicting CO4 Corrosion in the Oil and Gas Industry written by and published by . This book was released on 1994 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on CO2 Corrosion Control in Oil and Gas Production written by Liane M. Smith and published by Woodhead Publishing Limited. This book was released on 1997 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by European Federation of Corrosion and published by CRC Press. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and updated set of guidelines applicable to stainless steels, nickel alloys and titanium alloys covering: SSC/SCC test procedures; reference environments for SSC and SCC testing; guidance on autoclave testing of CRAs; procedures for testing CRAs exposed to sulphur and H2S.

Download or read book A Working Party Report on Sea Water Corrosion of Stainless Steels Mechanisms and Experiences written by European Federation of Corrosion and published by Woodhead Publishing Limited. This book was released on 1996 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at a workshop in 1995 organised by SINTEF Corrosion and Surface Technology (Trondheim) in co-operation with the EFC Working Parties on Marine Corrosion and Microbial Corrosion. Particular attention was given to biofilms, their causes, effects and prevention, as well as to the behaviour in seawater of high alloyed austenitic stainless steels including 6Mo, and super duplex stainless steels.

Download or read book Corrosion by Carbon and Nitrogen written by H Grabke and published by Elsevier. This book was released on 2014-01-23 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal dusting is a form of corrosion involving the disintegration of metals and alloys into a dust of graphite and metal particles when exposed to a carburizing atmosphere. This important book reviews the factors affecting metal dusting and how it can be prevented in sectors such as the chemical and petrochemical industries and in the direct reduction of iron ores. It also considers the related corrosion phenomena of carburization and nitridation. After an introductory chapter setting out the key processes involved in metal dusting, the book reviews how this corrosion process affects a range of metals such as iron and steel, as well as nickel-based and chromium-based high-temperature alloys. There are chapters on the effects of particular gas mixtures on the corrosion process and on the use of coatings to prevent metal dusting. Processes involved in carburization and nitridation are also described and discussed. With its distinguished editors and team of contributors, Corrosion by carbon and nitrogen is a valuable reference for all those concerned with understanding and preventing these corrosion processes in various industries. Reviews this corrosion process and how it affects the petrochemical and other industries Discusses the effect of particular gas mixtures on the corrosion process

Download or read book Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2014-01-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in ageing refinery plant presents a serious safety hazard. This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and controlled. The book reviews factors affecting corrosion such as carburisation and metal dusting as well as corrosion in steel and other materials used in refinery technology. It considers corrosion in a range of refinery equipment such as storage tanks, HF alkylation units, sour water strippers and insulated units. Other chapters discuss ways of testing for corrosion and cracking in refineries together with integrity and life cycle assessment techniques. There is also coverage of ways of trouble-shooting corrosion problems and preventative measures such as coating systems.With its distinguished editor and team of contributors, Corrosion in refineries is a valuable reference for all those concerned with building and maintaining refineries in the petrochemical industry. Summarises key research into corrosion processes in refinery equipment Discusses ways of testing for corrosion and cracking in refineries

Download or read book Corrosion Under Insulation CUI Guidelines written by Gino De Landtsheer and published by Woodhead Publishing. This book was released on 2020-08-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for use on all plants and installations that contain insulated vessels, piping, and equipment, and cover a risk-based inspection methodology for CUI, inspection techniques, and recommended best practices for mitigating CUI. The guidelines include design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials, and protection guards. Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection, or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. Provides revised and updated technical guidance on managing CUI provided by EFC Working Parties 13 and 15 Discusses the standard approach to risk based inspection methodology Presents the argument that CUI is everywhere, and looks at mitigating actions that can be started from the onset Includes a wide array of concepts of corrosion mitigation

Download or read book Local Probe Techniques for Corrosion Research written by R Oltra and published by Elsevier. This book was released on 2014-01-23 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective investigation of corrosion requires the use of methods that can probe material surfaces at the atomic or molecular level and can be used in situ. This important collection reviews the range of techniques available and how they can be used to analyse different types of corrosion.A number of chapters discuss the use of scanning probe microscopy techniques such as electrochemical scanning tunnelling microscopy and atomic force microscopy (EC-STM and EC-AFM). Other chapters analyse local electrochemical techniques such as scanning electrochemical microscopy (SECM), scanning vibrating electrode techniques (SVET), scanning droplet and scanning kelvin probe microscopy (SKFM), as well as microraman spectroscopy and photoelectrochemical imaging. The book reviews the application of these techniques in practice to various metals and types of coating as well as different kinds of corrosion.With its distinguished editors and team of contributors, this is a valuable reference for all those concerned with corrosion research. Discusses methods that can probe material surfaces at the atomic or molecular level A valuable reference for all those concerned with corrosion research

Download or read book Corrosion Under Insulation CUI Guidelines written by and published by Woodhead Publishing. This book was released on 2015-11-26 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical and offshore companies. The guidelines are intended for use on all plants and installation that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies. The original document first published in 2008 was very successful and provided an important resource in the continuing battle to mitigate CUI. Many members of the EFC corrosion community requested an update and this has taken between 18-24 months to do so. Hopefully this revised document will continue to serve the community providing a practical source of information on how to monitor and manage insulated systems. Revised and fully updated technical guidance on managing CUI provided by EFC Working Parties WP13 and WP 15 Contributions from a number of European refining, petrochemical and offshore companies Extensive appendices that provide additional practical guidance on the implementation of corrosion-under-insulation best practice, collected practical expertise and case studies

Download or read book Corrosion of Reinforcement in Concrete EFC 25 written by J. Mietz and published by CRC Press. This book was released on 2020-08-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the full papers presented in the successful session "Corrosion of Steel in Concrete" at EUROCORR '97. It highlights the areas of technical development in this field, including monitoring of steel reinforcement corrosion, prevention of corrosion and electrochemical repair methods.

Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Elsevier. This book was released on 2007-05-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures. Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials. Reviews key factors affecting the corrosion and service life of copper and aluminium alloys Discusses the use of the alloys in seawater

Download or read book Nuclear Corrosion written by Stefan Ritter and published by Woodhead Publishing. This book was released on 2020-08-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Corrosion: Research, Progress and Challenges, part of the “Green Book series of the EFC, builds upon the foundations of the very first book published in this series in 1989 (“Number 1 - Corrosion in the Nuclear Industry ). This newest volume provides an overview on state-of-the-art research in some of the most important areas of nuclear corrosion. Chapters covered include aging phenomena in light water reactors, reprocessing plants, nuclear waste disposal, and supercritical water and liquid metal systems. This book will be a vital resource for both researchers and engineers working within the nuclear field in both academic and industrial environments. Discusses industry related aspects of materials in nuclear power generation and how these materials react with the environment Provides comprehensive coverage of the topic as written by noted experts in the field Includes coverage of nuclear waste corrosion

Download or read book Amine Unit Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2007-04-18 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA), diethanolamine (DEA), monoethanolamine (MEA) and di-isopropanolamine (DIPA), and makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability. Covers such amine types as Methyl Diethanolamine (MDEA) and Di-isopropanolamine Makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability

Download or read book Corrosion of Reinforcement in Concrete written by M Raupach and published by Woodhead Publishing. This book was released on 2014-01-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the widespread use of reinforced concrete in infrastructure, understanding the corrosion of this material is of major importance. As a result there has been a wealth of research into catalysts, inhibitors and effective means of monitoring the rate of corrosion. Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques summarises some of the most significant research and its implications.The book begins by reviewing findings from various experiments designed to test the corrosion rate of metals induced by a range of factors. Later chapters discuss techniques for monitoring and testing for corrosion. The book concludes by assessing important methods of prevention, including corrosion inhibitors, protective coatings and electrochemical methods for protection, together with rehabilitation procedures for susceptible structures.Filled with practical examples and written by a distinguished team of international contributors, Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques is an essential reference for civil engineers using reinforced concrete. Summarises research into catalysts, inhibitors and effective means of monitoring the rate of corrosion Concludes by assessing important methods of prevention