Download or read book A Tightly Coupled INS GPS Integration Using a MEMS IMU written by Jonathan M. Neu and published by . This book was released on 2004-09-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Electro-Mechanical Systems (MEMS) technology holds great promise for future navigation systems because of the reduced size and cost of MEMS inertial sensors relative to conventional devices. Current MEMS devices are much less accurate than standard inertial sensors, but they can still be useful. In this thesis, data was recorded from an inexpensive MEMS inertial measurement unit and integrated with GPS measurements using a tightly-coupled Kalman filter. The overall goal of this research is to investigate the usefulness of MEMS sensors for a small, real-time, low-cost INS/GPS integration. A golf cart was used to collect dynamic data, along with a commercial INS/GPS system to provide reference data. This data was then post-processed, and the filter's performance in the position, velocity, and attitude outputs were evaluated by comparing them to the reference system. The important system features of system alignment, bias feedback, and INS resets are described, and the filter's performance is analyzed using its estimate and covariance outputs and comparing them to the true error. Filter residuals are also shown and discussed. The final results show that, with adequate processing available, the INS/GPS filter using the MEMS instruments provides good position, velocity, and attitude results over a period of up to 15 minutes, as long as the data is at least somewhat dynamic. Without vehicle motion, the vehicle yaw state tends to wander excessively, due to the bias and noise of the MEMS gyroscopes. Over a long static period, the filter's position outputs would most likely diverge and become unstable. Recommendations are made to combat this problem, among them to conduct more characterization of the MEMS sensors, and to add GPS velocity measurements as an input to the filter.

Download or read book Fundamentals of Inertial Navigation Satellite based Positioning and their Integration written by Aboelmagd Noureldin and published by Springer Science & Business Media. This book was released on 2012-10-26 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Inertial Navigation, Satellite-based Positioning and their Integration is an introduction to the field of Integrated Navigation Systems. It serves as an excellent reference for working engineers as well as textbook for beginners and students new to the area. The book is easy to read and understand with minimum background knowledge. The authors explain the derivations in great detail. The intermediate steps are thoroughly explained so that a beginner can easily follow the material. The book shows a step-by-step implementation of navigation algorithms and provides all the necessary details. It provides detailed illustrations for an easy comprehension. The book also demonstrates real field experiments and in-vehicle road test results with professional discussions and analysis. This work is unique in discussing the different INS/GPS integration schemes in an easy to understand and straightforward way. Those schemes include loosely vs tightly coupled, open loop vs closed loop, and many more.

Download or read book Strapdown Inertial Navigation Technology written by David Titterton and published by IET. This book was released on 2004 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inertial navigation is widely used for the guidance of aircraft, missiles ships and land vehicles, as well as in a number of novel applications such as surveying underground pipelines in drilling operations. This book discusses the physical principles of inertial navigation, the associated growth of errors and their compensation. It draws current technological developments, provides an indication of potential future trends and covers a broad range of applications. New chapters on MEMS (microelectromechanical systems) technology and inertial system applications are included.

Download or read book MEMS based Integrated Navigation written by Priyanka Aggarwal and published by Artech House. This book was released on 2010 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their micro-scale size and low power consumption, Microelectromechanical systems (MEMS) are now being utilized in a variety of fields. This leading-edge resource focuses on the application of MEMS inertial sensors to navigation systems. The book shows you how to minimize cost by adding and removing inertial sensors. Moreover, this practical reference provides you with various integration strategies with examples from real field tests. From an introduction to MEMS navigation related applicationsOC to special topics on Alignment for MEMS-Based NavigationOC to discussions on the Extended Kalman Filter, this comprehensive book covers a wide range of critical topics in this fast-growing area."

Download or read book Global Positioning Systems Inertial Navigation and Integration written by Mohinder S. Grewal and published by John Wiley & Sons. This book was released on 2007-03-05 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated guide to GNSS and INS, and solutions to real-world GPS/INS problems with Kalman filtering Written by recognized authorities in the field, this second edition of a landmark work provides engineers, computer scientists, and others with a working familiarity with the theory and contemporary applications of Global Navigation Satellite Systems (GNSS), Inertial Navigational Systems (INS), and Kalman filters. Throughout, the focus is on solving real-world problems, with an emphasis on the effective use of state-of-the-art integration techniques for those systems, especially the application of Kalman filtering. To that end, the authors explore the various subtleties, common failures, and inherent limitations of the theory as it applies to real-world situations, and provide numerous detailed application examples and practice problems, including GNSS-aided INS, modeling of gyros and accelerometers, and SBAS and GBAS. Drawing upon their many years of experience with GNSS, INS, and the Kalman filter, the authors present numerous design and implementation techniques not found in other professional references. This Second Edition has been updated to include: GNSS signal integrity with SBAS Mitigation of multipath, including results Ionospheric delay estimation with Kalman filters New MATLAB programs for satellite position determination using almanac and ephemeris data and ionospheric delay calculations from single and dual frequency data New algorithms for GEO with L1 /L5 frequencies and clock steering Implementation of mechanization equations in numerically stable algorithms To enhance comprehension of the subjects covered, the authors have included software in MATLAB, demonstrating the working of the GNSS, INS, and filter algorithms. In addition to showing the Kalman filter in action, the software also demonstrates various practical aspects of finite word length arithmetic and the need for alternative algorithms to preserve result accuracy.

Download or read book Inertial Navigation Systems with Geodetic Applications written by Christopher Jekeli and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-07-24 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of inertial navigation systems (INS), including the sensor technology and the estimation of instrument errors, as well as their integration with Global Navigation Satellite Systems, specifically the Global Positioning System (GPS) for geodetic applications. The text is of interest to geodesists, including surveyors, mappers, and photogrammetrists; to engineers in aviation, navigation, guidance, transportation, and robotics; and to scientists involved in aerogeophysics and remote sensing. The most recent developments are covered with this second edition that also features an updated treatment of the classical material. Detailed mathematical derivations of the principles of measurement and data processing of inertial measurement units for both stabilized and strapdown systems. Complete treatment of the error dynamics from a statistical viewpoint, including the Kalman filter. A self-contained description of GPS with emphasis on kinematic applications. Key concepts supported by illustrations and numerical examples.

Download or read book China Satellite Navigation Conference CSNC 2012 Proceedings written by Jiadong Sun and published by Springer Science & Business Media. This book was released on 2012-04-05 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 3rd China Satellite Navigation Conference (CSNC2012) presents selected research papers from CSNC2012, held on 15-19 May in Guanzhou, China. These papers discuss the technologies and applications of the Global Navigation Satellite System (GNSS), and the latest progress made in the China BeiDou system especially. They are divided into 9 topics to match the corresponding sessions in CSNC2012, which broadly covered key topics in GNSS. Readers can learn about the BeiDou system and keep abreast of the latest advances in GNSS techniques and applications. SUN Jiadong is the Chief Designer of the Compass/BeiDou system, and the Academician of Chinese Academy of Sciences; LIU Jingnan is a professor at Wuhan University, and the Academician of Chinese Academy of Engineering; YANG Yuanxi is a professor at China National Administration of GNSS and Applications, and the Academician of Chinese Academy of Sciences; FAN Shiwei is a researcher on satellite navigation.

Download or read book Principles of GNSS Inertial and Multisensor Integrated Navigation Systems Second Edition written by Paul D. Groves and published by Artech House. This book was released on 2013-04-01 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and greatly expanded edition of the popular Artech House book Principles of GNSS, Inertial, and Multisensor Integrated Navigation Systems offers you a current and comprehensive understanding of satellite navigation, inertial navigation, terrestrial radio navigation, dead reckoning, and environmental feature matching . It provides both an introduction to navigation systems and an in-depth treatment of INS/GNSS and multisensor integration. The second edition offers a wealth of added and updated material, including a brand new chapter on the principles of radio positioning and a chapter devoted to important applications in the field. Other updates include expanded treatments of map matching, image-based navigation, attitude determination, acoustic positioning, pedestrian navigation, advanced GNSS techniques, and several terrestrial and short-range radio positioning technologies .. The book shows you how satellite, inertial, and other navigation technologies work, and focuses on processing chains and error sources. In addition, you get a clear introduction to coordinate frames, multi-frame kinematics, Earth models, gravity, Kalman filtering, and nonlinear filtering. Providing solutions to common integration problems, the book describes and compares different integration architectures, and explains how to model different error sources. You get a broad and penetrating overview of current technology and are brought up to speed with the latest developments in the field, including context-dependent and cooperative positioning.

Download or read book Aided Navigation GPS with High Rate Sensors written by Jay A. Farrell and published by McGraw Hill Professional. This book was released on 2008-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Cutting-Edge Aided Navigation Systems for Advanced Commercial & Military Applications Aided Navigation is a design-oriented textbook and guide to building aided navigation systems for smart cars, precision farming vehicles, smart weapons, unmanned aircraft, mobile robots, and other advanced applications. The navigation guide contains two parts explaining the essential theory, concepts, and tools, as well as the methodology in aided navigation case studies with sufficient detail to serve as the basis for application-oriented analysis and design. Filled with detailed illustrations and examples, this expert design tool takes you step-by-step through coordinate systems, deterministic and stochastic modeling, optimal estimation, and navigation system design. Authoritative and comprehensive, Aided Navigation features: End-of-chapter exercises throughout Part I In-depth case studies of aided navigation systems Numerous Matlab-based examples Appendices define notation, review linear algebra, and discuss GPS receiver interfacing Source code and sensor data to support examples is available through the publisher-supported website Inside this Complete Guide to Designing Aided Navigation Systems • Aided Navigation Theory: Introduction to Aided Navigation • Coordinate Systems • Deterministic Modeling • Stochastic Modeling • Optimal Estimation • Navigation System Design • Navigation Case Studies: Global Positioning System (GPS) • GPS-Aided Encoder • Attitude and Heading Reference System • GPS-Aided Inertial Navigation System (INS) • Acoustic Ranging and Doppler-Aided INS

Download or read book Fundamentals of High Accuracy Inertial Navigation written by Averil Burton Chatfield and published by AIAA. This book was released on 1997 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Electronic Engineering Communication and Management Vol 1 written by David Jin and published by Springer Science & Business Media. This book was released on 2012-01-24 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the main results of 2011 International Conference on Electronic Engineering, Communication and Management (EECM2011) held December 24-25, 2011, Beijing China. The EECM2011 is an integrated conference providing a valuable opportunity for researchers, scholars and scientists to exchange their ideas face to face together. The main focus of the EECM 2011 and the present 2 volumes “Advances in Electronic Engineering, Communication and Management” is on Power Engineering, Electrical engineering applications, Electrical machines, as well as Communication and Information Systems Engineering.

Download or read book Handbook of Position Location written by Reza Zekavat and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 1376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of position location technology — from fundamental theory to advanced practical applications Positioning systems and location technologies have become significant components of modern life, used in a multitude of areas such as law enforcement and security, road safety and navigation, personnel and object tracking, and many more. Position location systems have greatly reduced societal vulnerabilities and enhanced the quality of life for billions of people around the globe — yet limited resources are available to researchers and students in this important field. The Handbook of Position Location: Theory, Practice, and Advances fills this gap, providing a comprehensive overview of both fundamental and cutting-edge techniques and introducing practical methods of advanced localization and positioning. Now in its second edition, this handbook offers broad and in-depth coverage of essential topics including Time of Arrival (TOA) and Direction of Arrival (DOA) based positioning, Received Signal Strength (RSS) based positioning, network localization, and others. Topics such as GPS, autonomous vehicle applications, and visible light localization are examined, while major revisions to chapters such as body area network positioning and digital signal processing for GNSS receivers reflect current and emerging advances in the field. This new edition: Presents new and revised chapters on topics including localization error evaluation, Kalman filtering, positioning in inhomogeneous media, and Global Positioning (GPS) in harsh environments Offers MATLAB examples to demonstrate fundamental algorithms for positioning and provides online access to all MATLAB code Allows practicing engineers and graduate students to keep pace with contemporary research and new technologies Contains numerous application-based examples including the application of localization to drone navigation, capsule endoscopy localization, and satellite navigation and localization Reviews unique applications of position location systems, including GNSS and RFID-based localization systems The Handbook of Position Location: Theory, Practice, and Advances is valuable resource for practicing engineers and researchers seeking to keep pace with current developments in the field, graduate students in need of clear and accurate course material, and university instructors teaching the fundamentals of wireless localization.

Download or read book Progress in Location Based Services 2016 written by Georg Gartner and published by Springer. This book was released on 2016-10-12 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a selection of the best papers presented at the 13th International Symposium on Location Based Services (LBS 2016), which was held in Vienna (Austria) from November 14 to 16, 2016. It provides an overview of recent research in the field, including the latest advances in outdoor/indoor positioning, smart environment, spatial modeling, personalization and context awareness, cartographic communication, novel user interfaces, crowd sourcing, social media, big data analysis, usability and privacy.

Download or read book Computational Geometry written by Mark de Berg and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to computational geometry focuses on algorithms. Motivation is provided from the application areas as all techniques are related to particular applications in robotics, graphics, CAD/CAM, and geographic information systems. Modern insights in computational geometry are used to provide solutions that are both efficient and easy to understand and implement.

Download or read book Hydro Environmental Analysis written by James L. Martin and published by CRC Press. This book was released on 2013-12-04 with total page 5742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamental principles, Hydro-Environmental Analysis: Freshwater Environments presents in-depth information about freshwater environments and how they are influenced by regulation. It provides a holistic approach, exploring the factors that impact water quality and quantity, and the regulations, policy and management methods that are necessary to maintain this vital resource. It offers a historical viewpoint as well as an overview and foundation of the physical, chemical, and biological characteristics affecting the management of freshwater environments. The book concentrates on broad and general concepts, providing an interdisciplinary foundation. The author covers the methods of measurement and classification; chemical, physical, and biological characteristics; indicators of ecological health; and management and restoration. He also considers common indicators of environmental health; characteristics and operations of regulatory control structures; applicable laws and regulations; and restoration methods. The text delves into rivers and streams in the first half and lakes and reservoirs in the second half. Each section centers on the characteristics of those systems and methods of classification, and then moves on to discuss the physical, chemical, and biological characteristics of each. In the section on lakes and reservoirs, it examines the characteristics and operations of regulatory structures, and presents the methods commonly used to assess the environmental health or integrity of these water bodies. It also introduces considerations for restoration, and presents two unique aquatic environments: wetlands and reservoir tailwaters. Written from an engineering perspective, the book is an ideal introduction to the aquatic and limnological sciences for students of environmental science, as well as students of environmental engineering. It also serves as a reference for engineers and scientists involved in the management, regulation, or restoration of freshwater environments.

Download or read book Position Navigation and Timing Technologies in the 21st Century Volumes 1 and 2 written by Y. Jade Morton and published by John Wiley & Sons. This book was released on 2020-12-17 with total page 2064 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the latest developments in PNT technologies, including integrated satellite navigation, sensor systems, and civil applications Featuring sixty-four chapters that are divided into six parts, this two-volume work provides comprehensive coverage of the state-of-the-art in satellite-based position, navigation, and timing (PNT) technologies and civilian applications. It also examines alternative navigation technologies based on other signals-of-opportunity and sensors and offers a comprehensive treatment on integrated PNT systems for consumer and commercial applications. Volume 1 of Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications contains three parts and focuses on the satellite navigation systems, technologies, and engineering and scientific applications. It starts with a historical perspective of GPS development and other related PNT development. Current global and regional navigation satellite systems (GNSS and RNSS), their inter-operability, signal quality monitoring, satellite orbit and time synchronization, and ground- and satellite-based augmentation systems are examined. Recent progresses in satellite navigation receiver technologies and challenges for operations in multipath-rich urban environment, in handling spoofing and interference, and in ensuring PNT integrity are addressed. A section on satellite navigation for engineering and scientific applications finishes off the volume. Volume 2 of Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications consists of three parts and addresses PNT using alternative signals and sensors and integrated PNT technologies for consumer and commercial applications. It looks at PNT using various radio signals-of-opportunity, atomic clock, optical, laser, magnetic field, celestial, MEMS and inertial sensors, as well as the concept of navigation from Low-Earth Orbiting (LEO) satellites. GNSS-INS integration, neuroscience of navigation, and animal navigation are also covered. The volume finishes off with a collection of work on contemporary PNT applications such as survey and mobile mapping, precision agriculture, wearable systems, automated driving, train control, commercial unmanned aircraft systems, aviation, and navigation in the unique Arctic environment. In addition, this text: Serves as a complete reference and handbook for professionals and students interested in the broad range of PNT subjects Includes chapters that focus on the latest developments in GNSS and other navigation sensors, techniques, and applications Illustrates interconnecting relationships between various types of technologies in order to assure more protected, tough, and accurate PNT Position, Navigation, and Timing Technologies in the 21st Century: Integrated Satellite Navigation, Sensor Systems, and Civil Applications will appeal to all industry professionals, researchers, and academics involved with the science, engineering, and applications of position, navigation, and timing technologies. pnt21book.com

Download or read book The Use of Artificial Satellites for Geodesy written by Soren W. Henriksen and published by American Geophysical Union. This book was released on 1972 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the American Geophysical Union as part of the Geophysical Monograph Series, Volume 15. This monograph contains 34 communications presented at the Third International Symposium on the Use of Artificial Satellites for Geodesy in 1971, and 4 invited papers on subjects that complement the others and provide continuity. All contributions represent the most recent findings in the theoretical and applied fields of satellite geodesy, including new instrumentation (satellite sensors and ground equipment) of potential use in satellite geodesy. The two preceding symposiums were held at Washington, D.C., in 1962 and at Athens, Greece, in 1965. The Proceedings of the first were published by North-Holland Publishing Company, Amsterdam, in 1963, and the Proceedings of the second by the National Technical University, Athens, in 1967. The prime mover behind both was George Veis, and his continuing dedication to this subject was in large measure responsible for scheduling this third symposium.