Download or read book A Study of the Electrolytic Method of Silver Cleaning Classic Reprint written by Harold Locke Lang and published by Forgotten Books. This book was released on 2019-01-20 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Study of the Electrolytic Method of Silver Cleaning The details of a satisfactory method for household use are essen tially as follows: An enamel or agate ware dish should be partly filled with a cleaning solution of 1 teaspoonful of either washing or baking soda and 1 teaspoonful of common table saltto each quart of water and placed directly on the stove to boil. A sheet Of alumi num or clean zinc should then be dropped into the dish and the tarnished silver placed in contact with this metal. It is best that the. Silver be entirely covered with the cleaning solution and that the solution remain at the boiling temperature. As soon as the tar nish has been removed the silver should be removed, rinsed in clean water, .and wiped with a soft cloth. Aluminum corrodes quickly in the cleaning solution, so that aluminum dishes of any value for culinary purposes should never be used. Aluminum ware, which would otherwise be thrown away, or any inexpensive piece Of the metal, will serve very satisfactorily for cleaning silver. Zinc may be used in place of aluminum, but it becomes corroded and inactive in a much shorter time. Unless it islpossible to obtain a strong acid, such as muriatic acid, in which the activity of the zinc may be frequently renewed, it is inadvisable to try to employ this metal in the electrolytic method for cleaning silver. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A Study of the Electrolytic Method of Silver Cleaning written by Harold Locke Lang and published by . This book was released on 1916 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Study of the Electrolytic Method of Silver Cleaning written by United States. Department of Agriculture and published by . This book was released on 1917 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Study of the Electrolytic Method of Silver Cleaning written by and published by . This book was released on 1916 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of the Electrolytic Method of Silver Cleaning written by Harold Locke Lang and published by . This book was released on 1916 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemical Methods written by Allen J. Bard and published by Wiley Global Education. This book was released on 2012-04-13 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das führende Werk auf seinem Gebiet - jetzt durchgängig auf den neuesten Stand gebracht! Die theoretischen Grundlagen der Elektrochemie, erweitert um die aktuellsten Erkenntnisse in der Theorie des Elektronentransfers, werden hier ebenso besprochen wie alle wichtigen Anwendungen, darunter modernste Verfahren (Ultramikroelektroden, modifizierte Elektroden, LCEC, Impedanzspektrometrie, neue Varianten der Pulsvoltammetrie und andere). In erster Linie als Lehrbuch gedacht, läßt sich das Werk aber auch hervorragend zum Selbststudium und zur Auffrischung des Wissensstandes verwenden. Lediglich elementare Grundkenntnisse der physikalischen Chemie werden vorausgesetzt.
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Refining Precious Metal Wastes Gold silver platinum Metals written by Calm Morrison Hoke and published by . This book was released on 1978 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Canadian Mining and Metallurgical Bulletin written by and published by . This book was released on 1928 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanistic Organic Electrochemistry written by D. Peters and published by The Electrochemical Society. This book was released on 2015-12-28 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book American Home written by and published by . This book was released on 1964 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Modern Aspects of Electrochemistry 42 written by Constantinos G. Vayenas and published by Springer Science & Business Media. This book was released on 2008-03-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume analyzes and summarizes recent developments in several key interfacial electrochemical systems in the areas of fuel cell electrocatatalysis, electrosynthesis and electrodeposition. The six Chapters are written by internationally recognized experts in these areas and address both fundamental and practical aspects of several existing or emerging key electrochemical technologies. The Chapter by R. Adzic, N. Marinkovic and M. Vukmirovic provides a lucid and authoritative treatment of the electrochemistry and electrocatalysis of Ruthenium, a key element for the devel- ment of efficient electrodes for polymer electrolyte (PEM) fuel cells. Starting from fundamental surface science studies and interfacial considerations, this up-to-date review by some of the pioneers in this field, provides a deep insight in the complex catalytic-electrocatalytic phenomena occurring at the interfaces of PEM fuel cell electrodes and a comprehensive treatment of recent developments in this extremely important field. Several recent breakthroughs in the design of solid oxide fuel cell (SOFC) anodes and cathodes are described in the Chapter of H. Uchida and M. Watanabe. The authors, who have pioneered several of these developments, provide a lucid presentation d- cribing how careful fundamental investigations of interfacial electrocatalytic anode and cathode phenomena lead to novel electrode compositions and microstructures and to significant practical advances of SOFC anode and cathode stability and enhanced electrocatalysis.
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Electrochemical Science and Technology written by Keith Oldham and published by John Wiley & Sons. This book was released on 2011-11-21 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry is a discipline of wide scientific and technological interest. Scientifically, it explores the electrical properties of materials and especially the interfaces between different kinds of matter. Technologically, electrochemistry touches our lives in many ways that few fully appreciate; for example, materials as diverse as aluminum, nylon, and bleach are manufactured electrochemically, while the batteries that power all manner of appliances, vehicles, and devices are the products of electrochemical research. Other realms in which electrochemical science plays a crucial role include corrosion, the disinfection of water, neurophysiology, sensors, energy storage, semiconductors, the physics of thunderstorms, biomedical analysis, and so on. This book treats electrochemistry as a science in its own right, albeit resting firmly on foundations provided by chemistry, physics, and mathematics. Early chapters discuss the electrical and chemical properties of materials from which electrochemical cells are constructed. The behavior of such cells is addressed in later chapters, with emphasis on the electrodes and the reactions that occur on their surfaces. The role of transport to and from electrodes is a topic that commands attention, because it crucially determines cell efficiency. Final chapters deal with voltammetry, the methodology used to investigate electrode behavior. Interspersed among the more fundamental chapters are chapters devoted to applications of electrochemistry: electrosynthesis, power sources, “green electrochemistry”, and corrosion. Electrochemical Science and Technology is addressed to all who have a need to come to grips with the fundamentals of electrochemistry and to learn about some of its applications. It will constitute a text for a senior undergraduate or graduate course in electrochemistry. It also serves as a source of material of interest to scientists and technologists in various fields throughout academia, industry, and government – chemists, physicists, engineers, environmentalists, materials scientists, biologists, and those in related endeavors. This book: Provides a background to electrochemistry, as well as treating the topic itself. Is accessible to all with a foundation in physical science, not solely to chemists. Is addressed both to students and those later in their careers. Features web links (through www.wiley.com/go/EST) to extensive material that is of a more tangential, specialized, or mathematical nature. Includes questions as footnotes to support the reader’s evolving comprehension of the material, with fully worked answers provided on the web. Provides web access to Excel® spreadsheets which allow the reader to model electrochemical events. Has a copious Appendix of relevant data.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
