Download or read book Automotive Spark Ignited Direct Injection Gasoline Engines written by F. Zhao and published by Elsevier. This book was released on 2000-02-08 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.

Download or read book Automotive Gasoline Direct Injection Engines written by Fuquan Zhao and published by SAE International. This book was released on 2002-05-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest global technical initiatives in the rapidly progressing area of gasoline direct injection (GDI), spark-ignited gasoline engines and examines the contribution of each process and sub-system to the efficiency of the overall system. Including discussions, data, and figures from many technical papers and proceedings that are not available in the English language, Automotive Gasoline Direct Injection Systems will prove to be an invaluable desk reference for any GDI subject or direct-injection subsystem that is being developed worldwide.

Download or read book Emission Control and Fuel Economy written by John H Johnson and published by SAE International. This book was released on 2005-06-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission and fuel economy regulations and standards are compelling manufacturers to build ultra-low emission vehicles. As a result, engineers must develop spark-ignition engines with integrated emission control systems that use reformulated low-sulfur fuel. Emission Control and Fuel Economy for Port and Direct Injected SI Engines is a collection of SAE technical papers that covers the fundamentals of gasoline direct injection (DI) engine emissions and fuel economy, design variable effects on HC emissions, and advanced emission control technology and modeling approaches. All papers contained in this book were selected by an accomplished expert as the best in the field; reprinted in their entirety, they present a pathway to integrated emission control systems that meet 2004-2009 EPA standards for light-duty vehicles.

Download or read book Congressional Budget Request written by United States. Department of Energy and published by . This book was released on 1986 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sensors and Their Applications XI written by K. T. V. Grattan and published by CRC Press. This book was released on 2018-05-04 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: With research continuing to expand and develop, the marketplace for sensors and instrumentation remains one of the most significant for the United Kingdom, the European Union, and the economies of major developed nations. Sensors and Their Applications XI discusses novel research in the field of sensors and transducers, and provides valuable insight into new and topical applications of the technology. The book records the breadth and quality of the field and acts as a topical record of work in sensors and their applications. It will serve as an invaluable reference for physicists, engineers, and chemists working in this area of technology for many years to come.

Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2022-01-21 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively discusses diesel combustion phenomena like ignition delay, fuel-air mixing, rate of heat release, and emissions of smoke, particulate and nitric oxide. It enables quantitative evaluation of these important phenomena and parameters. Most importantly, it attempts to model them with constants that are independent of engine types and hence they could be applied by the engineers and researchers for a general engine. This book emphasizes the importance of the spray at the wall in precisely describing the heat release and emissions for most of the engines on and off-road. It gives models for heat release and emissions. Every model is thoroughly validated by detailed experiments using a broad range of engines. The book describes an elegant quasi-one-dimensional model for heat release in diesel engines with single as well as multiple injections. The book describes how the two aspects, namely, fuel injection rate and the diameter of the combustion bowl in the piston, have enabled meeting advanced emission, noise, and performance standards. The book also discusses the topics of computational fluid dynamics encompassing RANS and LES models of turbulence. Given the contents, this book will be useful for students, researchers and professionals working in the area of vehicle engineering and engine technology. This book will also be a good professional book for practising engineers in the field of combustion engines and automotive engineering.

Download or read book Exergetic Energetic and Environmental Dimensions written by Ibrahim Dincer and published by Academic Press. This book was released on 2017-10-06 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book looks at recent studies on interdisciplinary research related to exergy, energy, and the environment. This topic is of prime significance – there is a strong need for practical solutions through better design, analysis and assessment in order to achieve better efficiency, environment and sustainability. Exergetic, Energetic and Environmental Dimensions covers a number of topics ranging from thermodynamic optimization of energy systems, to the environmental impact assessment and clean energy, offering readers a comprehensive reference on analysis, modeling, development, experimental investigation, and improvement of many micro to macro systems and applications, ranging from basic to advanced categories. Its comprehensive content includes: - Comprehensive coverage of development of systems considering exergy, energy, and environmental issues, along with the most up-to-date information in the area, plus recent developments - New developments in the area of exergy, including recent debate involving the shaping of future directions and priorities for better environment, sustainable development and energy security - Provides a number of illustrative examples, practical applications, and case studies - Introduces recently developed technological and strategic solutions and engineering applications for professionals in the area - Provides numerous engineering examples and applications on exergy - Offers a variety of problems that foster critical thinking and skill development

Download or read book Annual Index abstracts of SAE Technical Papers 2004 written by and published by . This book was released on 2005 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Challenges and Opportunities in Industrial and Mechanical Engineering A Progressive Research Outlook written by S M Pandey and published by CRC Press. This book was released on 2024-06-24 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present time Industry 4.0 is the need of all industries because it connects industries to AI, high productivity, safety, and flexibility, ensures the 100% utilization of resources across diverse manufacturing systems, and could accelerate normal manufacturing systems to advanced manufacturing systems by using robotics, additive manufacturing, and many more. In this book, the collection of selected papers is constituted from the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME 2021), which was at the National Institute of Technology (NIT), Patna, India from August 5 to 7, 2021. This conference brings together all academic people, industry experts, and researchers from India as well as abroad for involving thoughts on the needs, challenges, new technology, opportunities threats in the current transformational field of aspire. This book deliberates on several elements and their relevance to hard-core areas of industrial and mechanical engineering including design engineering, production engineering, indus trial engineering, automobile engineering, thermal and fluid engineering, mechatronics control robotics, interdisciplinary, and many new emerging topics that keep potential in several areas of applications. This book focuses on providing versatile knowledge of cut ting-edge practices to all readers, helping to develop a clear vision toward Industry 4.0, robotics automation, and additive manufacturing in this demanding and evolving time. The book will be a treasured reference for students, researchers, and professionals inter ested in mechanical engineering and allied fields.

Download or read book Technological Advancement in Mechanical and Automotive Engineering written by Muhammad Yusri Ismail and published by Springer Nature. This book was released on 2022-08-08 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book Technological Advancement in Mechanical & Automotive Engineering gathers selected papers submitted to the 6th International Conference on Mechanical Engineering Research in fields related to automotive engineering, thermal and fluid engineering, and energy. This proceeding consists of papers in aforementioned related fields presented by researchers and scientists from universities, research institutes and industry showcasing their latest findings and discussions with an emphasis on innovations and developments in embracing the new norm resulting from the COVID pandemic.

Download or read book Proceedings of the 7th International Conference on Advances in Energy Research written by Manaswita Bose and published by Springer Nature. This book was released on 2020-10-17 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 7th International Conference on Advances in Energy Research (ICAER 2019), providing a comprehensive coverage encompassing all fields and aspects of energy in terms of generation, storage, and distribution. Themes such as optimization of energy systems, energy efficiency, economics, management, and policy, and the interlinkages between energy and environment are included. The contents of this book will be of use to researchers and policy makers alike.

Download or read book Advances in Energy Resources and Environmental Engineering written by Abdelfatah Abomohra and published by Springer Nature. This book was released on with total page 1733 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Combustion Techniques and Engine Technologies for the Automotive Sector written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2019-10-10 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the recent advances in combustion strategies and engine technologies, with specific reference to the automotive sector. Chapters discuss the advanced combustion technologies, such as gasoline direct ignition (GDI), spark assisted compression ignition (SACI), gasoline compression ignition (GCI), etc., which are the future of the automotive sector. Emphasis is given to technologies which have the potential for utilization of alternative fuels as well as emission reduction. One special section includes a few chapters for methanol utilization in two-wheelers and four wheelers. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.

Download or read book Simulation and Optimization of Internal Combustion Engines written by Zhiyu Han and published by SAE International. This book was released on 2021-12-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation and Optimization of Internal Combustion Engines provides the fundamentals and up-to-date progress in multidimensional simulation and optimization of internal combustion engines. While it is impossible to include all the models in a single book, this book intends to introduce the pioneer and/or the often-used models and the physics behind them providing readers with ready-to-use knowledge. Key issues, useful modeling methodology and techniques, as well as instructive results, are discussed through examples. Readers will understand the fundamentals of these examples and be inspired to explore new ideas and means for better solutions in their studies and work. Topics include combustion basis of IC engines, mathematical descriptions of reactive flow with sprays, engine in-cylinder turbulence, fuel sprays, combustions and pollutant emissions, optimization of direct-injection gasoline engines, and optimization of diesel and alternative fuel engines.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Atomization and Sprays written by and published by . This book was released on 2009 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Department of the Interior and Related Agencies Appropriations for 1985 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1984 with total page 1418 pages. Available in PDF, EPUB and Kindle. Book excerpt: