Download or read book Dynamic Behavior of Materials Volume 1 written by Bo Song and published by Springer. This book was released on 2014-08-08 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, the first volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: · General Dynamic Materials Response · Novel Dynamic Testing Techniques · Dynamic Fracture and Failure · Dynamic Behavior of Geo-materials · Dynamic Behavior of Composites and Multifunctional materials · Dynamic Behavior of Low-Impedance materials · Dynamic Modeling and Simulation of Dynamic Behavior of Materials · Quantitative Visualization of Dynamic Behavior of Materials · Shock/Blast Loading of Materials · Interface and Structural Dynamics · Material Response

Download or read book Facing the Heat Barrier written by T.A. Heppenheimer and published by Courier Dover Publications. This book was released on 2018-09-12 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume from The NASA History Series presents an overview of the science of hypersonics, the study of flight at speeds at which the physics of flows is dominated by aerodynamic heating. The survey begins during the years immediately following World War II, with the first steps in hypersonic research: the development of missile nose cones and the X-15; the earliest concepts of hypersonic propulsion; and the origin of the scramjet engine. Next, it addresses the re-entry problem, which came to the forefront during the mid-1950s, showing how work in this area supported the manned space program and contributed to the development of the orbital shuttle. Subsequent chapters explore the fading of scramjet studies and the rise of the National Aerospace Plane (NASP) program of 1985–95, which sought to lay groundwork for single-stage vehicles. The program's ultimate shortcomings — in terms of aerodynamics, propulsion, and materials — are discussed, and the book concludes with a look at hypersonics in the post-NASP era, including the development of the X-33 and X-34 launch vehicles, further uses for scramjets, and advances in fluid mechanics. Clearly, ongoing research in hypersonics has yet to reach its full potential, and readers with an interest in aeronautics and astronautics will find this book a fascinating exploration of the field's history and future.

Download or read book Launch Vehicle Design Process Characterization Technical Integration and Lessons Learned written by J. C. Blair and published by . This book was released on 2001 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Survey of Missions for Unmanned Undersea Vehicles written by Robert Button and published by RAND Corporation. This book was released on 2009 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Which military missions for unmanned undersea vehicles (UUVs) appear most promising to pursue in terms of military need, operational and technical risks, alternatives, and cost? To answer this question, the authors assess risks associated with using UUVs for advocated missions, identify non-UUV alternatives that may be more appropriate for such missions, and analyze potential costs associated with UUV development and use. They conclude that seven missions: mine countermeasures, deployment of leave-behind surveillance sensors or sensor arrays, near-land and harbor monitoring, oceanography, monitoring undersea infrastructure, anti-submarine warfare tracking, and inspection/identification - appear most promising. Among other recommendations, the authors suggest that the U.S. Navy consolidate its unmanned system master plans and establish relevant priorities in coordination with the Office of the Secretary of Defense. Increased emphasis on the use of surface platforms rather than submarines as host platforms is recommended.

Download or read book Bio Inspired Innovation and National Security written by National Defense University and published by NDU Press. This book was released on 2010-10 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the vital importance of the emerging area of biotechnology and its role in defense planning and policymaking, no definitive book has been written on the topic for the defense policymaker, the military student, and the private-sector bioscientist interested in the "emerging opportunities market" of national security. This edited volume is intended to help close this gap and provide the necessary backdrop for thinking strategically about biology in defense planning and policymaking. This volume is about applications of the biological sciences, here called "biologically inspired innovations," to the military. Rather than treating biology as a series of threats to be dealt with, such innovations generally approach the biological sciences as a set of opportunities for the military to gain strategic advantage over adversaries. These opportunities range from looking at everything from genes to brains, from enhancing human performance to creating renewable energy, from sensing the environment around us to harnessing its power.

Download or read book Sustaining U S Global Leadership written by and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Deep Space Propulsion written by K. F. Long and published by Springer Science & Business Media. This book was released on 2011-11-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology of the next few decades could possibly allow us to explore with robotic probes the closest stars outside our Solar System, and maybe even observe some of the recently discovered planets circling these stars. This book looks at the reasons for exploring our stellar neighbors and at the technologies we are developing to build space probes that can traverse the enormous distances between the stars. In order to reach the nearest stars, we must first develop a propulsion technology that would take our robotic probes there in a reasonable time. Such propulsion technology has radically different requirements from conventional chemical rockets, because of the enormous distances that must be crossed. Surprisingly, many propulsion schemes for interstellar travel have been suggested and await only practical engineering solutions and the political will to make them a reality. This is a result of the tremendous advances in astrophysics that have been made in recent decades and the perseverance and imagination of tenacious theoretical physicists. This book explores these different propulsion schemes – all based on current physics – and the challenges they present to physicists, engineers, and space exploration entrepreneurs. This book will be helpful to anyone who really wants to understand the principles behind and likely future course of interstellar travel and who wants to recognizes the distinctions between pure fantasy (such as Star Trek’s ‘warp drive’) and methods that are grounded in real physics and offer practical technological solutions for exploring the stars in the decades to come.

Download or read book Weapon Systems Handbook written by and published by . This book was released on 2020-05-03 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: July 2019 Printed in BLACK AND WHITE The Army's Weapon Systems Handbook was updated in July 2019, but is still titled "Weapon Systems Handbook 2018." We are printing this in black and white to keep the price low. It presents many of the acquisition programs currently fielded or in development. The U.S. Army Acquisition Corps, with its 36,000 professionals, bears a unique responsibility for the oversight and systems management of the Army's acquisition lifecycle. With responsibility for hundreds of acquisition programs, civilian and military professionals collectively oversee research, development and acquisition activities totaling more than $20 billion in Fiscal Year 2016 alone. Why buy a book you can download for free? We print this so you don't have to. We at 4th Watch Publishing are former government employees, so we know how government employees actually use the standards. When a new standard is released, somebody has to print it, punch holes and put it in a 3-ring binder. While this is not a big deal for a 5 or 10-page document, many DoD documents are over 400 pages and printing a large document is a time- consuming effort. So, a person that's paid $25 an hour is spending hours simply printing out the tools needed to do the job. That's time that could be better spent doing mission. We publish these documents so you can focus on what you are there for. It's much more cost-effective to just order the latest version from Amazon.com. SDVOSB If there is a standard you would like published, let us know. Our web site is usgovpub.com

Download or read book Energy Research at DOE written by National Research Council and published by National Academies Press. This book was released on 2001-12-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: In legislation appropriating funds for DOE's fiscal year (FY) 2000 energy R&D budget, the House Interior Appropriations Subcommittee directed an evaluation of the benefits that have accrued to the nation from the R&D conducted since 1978 in DOE's energy efficiency and fossil energy programs. In response to the congressional charge, the National Research Council formed the Committee on Benefits of DOE R&D on Energy Efficiency and Fossil Energy. From its inception, DOE's energy R&D program has been the subject of many outside evaluations. The present evaluation asks whether the benefits of the program have justified the considerable expenditure of public funds since DOE's formation in 1977, and, unlike earlier evaluations, it takes a comprehensive look at the actual outcomes of DOE's research over two decades.

Download or read book Advances in Safety Reliability and Risk Management written by Christophe Berenguer and published by CRC Press. This book was released on 2011-08-31 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of topics on safety, reliability and risk management, the present publication will be of interest to academics and professionals working in a wide range of scientific, industrial and governmental sectors, including: Aeronautics and Aerospace; Chemical and Process Industry; Civil Engineering; Critical Infrastructures; Energy; Information Technology and Telecommunications; Land Transportation; Manufacturing; Maritime Transportation; Mechanical Engineering; Natural Hazards; Nuclear Industry; Offshore Industry; Policy Making and Public Planning.

Download or read book Manufacturing Engineering Education written by J. Paulo Davim and published by Chandos Publishing. This book was released on 2018-09-19 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Engineering Education includes original and unpublished chapters that develop the applications of the manufacturing engineering education field. Chapters convey innovative research ideas that have a prodigious significance in the life of academics, engineers, researchers and professionals involved with manufacturing engineering. Today, the interest in this subject is shown in many prominent global institutes and universities, and the robust momentum of manufacturing has helped the U.S. economy continue to grow throughout 2014. This book covers manufacturing engineering education, with a special emphasis on curriculum development, and didactic aspects. - Includes original and unpublished chapters that develop the applications of the manufacturing engineering education principle - Applies manufacturing engineering education to curriculum development - Offers research ideas that can be applied to the work of academics, engineers, researchers and professionals

Download or read book Jane s Ammunition Handbook written by Leland Ness and published by Ihs Global Incorporated. This book was released on 2008-10-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reference guide for ammunition in service, in stock and under development with product development analysis and history, plus technical descriptions, specifications and images. Also manufacturers' details and expert tables to aid small arms identification

Download or read book Lessons from the Army s Future Combat Systems Program written by Christopher G. Pernin and published by Rand Corporation. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Army's Future Combat Systems program aimed to field an ambitious system of systems, with novel technologies integrated via an advanced wireless network. The largest and most ambitious planned acquisition program in the Army's history, it was cancelled in 2009, and some of its efforts transitioned to follow-on programs. This report documents the program's complex history and draws lessons from its experiences.

Download or read book The International Handbook of Space Technology written by Malcolm Macdonald and published by Springer. This book was released on 2014-07-08 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook provides an overview of space technology and a holistic understanding of the system-of-systems that is a modern spacecraft. With a foreword by Elon Musk, CEO and CTO of SpaceX, and contributions from globally leading agency experts from NASA, ESA, JAXA, and CNES, as well as European and North American academics and industrialists, this handbook, as well as giving an interdisciplinary overview, offers, through individual self-contained chapters, more detailed understanding of specific fields, ranging through: · Launch systems, structures, power, thermal, communications, propulsion, and software, to · entry, descent and landing, ground segment, robotics, and data systems, to · technology management, legal and regulatory issues, and project management. This handbook is an equally invaluable asset to those on a career path towards the space industry as it is to those already within the industry.

Download or read book Breaking the Code of Project Management written by A. Laufer and published by Springer. This book was released on 2016-04-30 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new classic is an examination of how to refigure project management to be more efficient and effective, particularly in terms of leadership. Using a case study approach, the author, Alex Laufer presents a specific set of guidelines on how to improve the team approach to any project, be it a new airline jet or an IT project.

Download or read book Army Science and Technology Master Plan written by United States. Department of the Army and published by . This book was released on 2001 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students. Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices. Sample Chapter(s). Chapter 1: Atom, Molecule, and Nanocluster Manipulations for Nanostructure Fabrication Using Scanning Probe Microscopy (3,320 KB). Contents: Atomic Force Microscope Lithography (N Kawasegi et al.); Nanowire Assembly and Integration (Z Gu & D H Gracias); Extreme Ultraviolet Lithography (H Kinoshita); Electron Projection Lithography (T Miura et al.); Electron Beam Direct Writing (K Yamazaki); Electron Beam Induced Deposition (K Mitsuishi); Focused Ion Beams and Interaction with Solids (T Ishitani et al.); Nanofabrication of Nanoelectromechanical Systems (NEMS): Emerging Techniques (K L Ekinci & J Brugger); and other papers. Readership: Researchers, professionals, and graduate students in the fields of nanoengineering and nanoscience.