Download or read book Dynamic Behavior of Materials Volume 1 written by Jamie Kimberley and published by Springer. This book was released on 2017-10-29 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2017 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior

Download or read book Composite Structures written by I.H. Marshall and published by Springer. This book was released on 1991-09-30 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained herein were presented at the Sixth International Conference on Composite Structures (ICCS/6) held at Paisley College, Scotland in September 1991. The Conference was organised and sponsored by Paisley College. It was co-sponsored by Scottish Enterprise, the National Engineering Laboratory, the US Army Research, Development and Standardisation Group-UK, Strathclyde Regional Council and Renfrew District Council. It forms a natural and ongoing progression from the highly successful ICCS/1/2/3/4 and 5 held at Paisley in 1981, 1983, 1985, 1987 and 1989 respectively. As we enter the final decade of this century many organisations throughout the world are adopting a prophetic role by attempting to forecast future scientific advances and their associated impact on mankind. Although some would argue that to do so is folly, without such futuristic visionaries the world would be that much poorer. IntelJigent speculation based on research trends and historical advances, rather than fanciful theories, breathes a healthy air of enthusiasm into the scientific community. Surely this is the very oxygen necessary to ignite the fir~s of innovation and invention amongst pioneers of research.

Download or read book Heterogeneous Media written by Konstantin Markov and published by Springer Science & Business Media. This book was released on 2000-02-02 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most materials used in contemporary life and industry are heterogeneous (composites) and multicomponent, possessing a rich and complex internal structure. This internal structure, or microstructure, plays a key role in understanding and controlling the continuum behavior, or macroscopic, of a wide variety of materials. The modeling process is a critical tool for scientists and engineers studying the analysis and experimentation for the micromechanics and behavior of these materials. "Heterogeneous Media" is a critical, in-depth edited survey of the major topics surrounding the modeling and analysis of problems in micromechanics of multicomponent systems, including conceptual and practical aspects. The goal of this extensive and comprehensive survey is to provide both specialists and nonspecialists with an authoritative and interdisciplinary perspective of current ideas and methods used for modeling heterogeneous materials behavior and their applications. Topics and Features: * all chapters use interdisciplinary modeling perspective for investigating heterogeneous media*Five chapters provide self-contained discussions, with background provided*Focuses only upon most important techniques and models, fully exploring micro-macro interconnections*extensive introductory survey chapter on micromechanics of heterogeneous media*microstructure characterization via statistical correlation functions*micro-scale deformation of pore space*wave fields and effective dynamical properties*modeling of the complex production technologies for composite materials The book is ideal for a general scientific and engineering audience needing an in-depth view and guide to current ideas, methods and

Download or read book ICCS19 19th International Conference on Composite Structures written by Antonio J.M. Ferreira and published by Società Editrice Esculapio. This book was released on 2016-08-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, it is quite easy to see various applications of fibrous composites, functionally graded materials, laminated composite, nano-structured reinforcement, morphing composites, in many engineering fields, such as aerospace, mechanical, naval and civil engineering. The increase in the use of composite structures in different engineering practices justify the present international meeting where researches from every part of the globe can share and discuss the recent advancements regarding the use of standard structural components within advanced applications such as buckling, vibrations, repair, reinforcements, concrete, composite laminated materials and more recent metamaterials. For this reason, the establishment of this 19th edition of International Conference on Composite Structures has appeared appropriate to continue what has been begun during the previous editions. ICCS wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures, sandwich panels, nanotechnology, bio-composites, delamination and fracture, experimental methods, manufacturing and other countless topics that have filled many sessions during this conference. As a proof of this event, which has taken place in Porto (Portugal), selected plenary and keynote lectures have been collected in the present book.

Download or read book Rock Dynamics Progress and Prospect Volume 2 written by Jianchun Li and published by CRC Press. This book was released on 2023-02-27 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Dynamics: Progress and Prospect contains 153 scientific and technical papers presented at the Fourth International Conference on Rock Dynamics and Applications (RocDyn-4, Xuzhou, China, 17-19 August 2022). The two-volume set has 7 sections. Volume 1 includes the first four sections with 6 keynotes and 5 young scholar plenary session papers, and contributions on analysis and theoretical development, and experimental testing and techniques. Volume 2 contains the remaining three sections with 74 papers on numerical modelling and methods, seismic and earthquake engineering, and rock excavation and engineering. Rock Dynamics: Progress and Prospect will serve as a reference on developments in rock dynamics scientific research and on rock dynamics engineering applications. The previous volumes in this series (RocDyn-1, RocDyn-2, and RocDyn-3) are also available via CRC Press.

Download or read book Extended Finite Element Method written by Amir R. Khoei and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the theory and applications of the extended finite element method (XFEM) in the linear and nonlinear problems of continua, structures and geomechanics Explores the concept of partition of unity, various enrichment functions, and fundamentals of XFEM formulation. Covers numerous applications of XFEM including fracture mechanics, large deformation, plasticity, multiphase flow, hydraulic fracturing and contact problems Accompanied by a website hosting source code and examples

Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions

Download or read book Software for Exascale Computing SPPEXA 2016 2019 written by Hans-Joachim Bungartz and published by Springer Nature. This book was released on 2020-07-30 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the research done and results obtained in the second funding phase of the Priority Program 1648 "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) presented at the SPPEXA Symposium in Dresden during October 21-23, 2019. In that respect, it both represents a continuation of Vol. 113 in Springer’s series Lecture Notes in Computational Science and Engineering, the corresponding report of SPPEXA’s first funding phase, and provides an overview of SPPEXA’s contributions towards exascale computing in today's sumpercomputer technology. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest.

Download or read book Advanced Multifunctional Lightweight Aerostructures written by Kamran Behdinan and published by John Wiley & Sons. This book was released on 2021-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a review of the newest methodologies for the characterization and modelling of lightweight materials and structures Advances in Multifunctional Lightweight Structures offers a text that provides and in-depth analyses of the thermal, electrical and mechanical responses of multi-functional lightweight structures. The authors, noted experts on the topic, address the most recent and innovative methodologies for the characterization and modelling of lightweight materials and discuss various shell and plate theories. They present multifunctional materials and structures and offer detailed descriptions of the complex modelling of these structures. The text is divided into three sections that demonstrate a keen understanding and awareness for multi-functional lightweight structures by taking a unique approach. The authors explore multi-disciplinary modelling and characterization alongside benchmark problems and applications, topics that are rarely approached in this field. This important book: • Offers an analyses of the thermal, electrical and mechanical responses of multi-functional lightweight structures • Covers innovative methodologies for the characterization and modelling of lightweight materials and structures • Presents a characterization of a wide variety of novel materials • Considers multifunctional novel structures with potential applications in different high-tech industries • Includes efficient and highly accurate methodologies Written for professionals, engineers and researchers in industrial and other specialized research institutions, Advances in Multifunctional Lightweight Structures offers a much needed text to the design practices of existing engineering building services and how these methods combine with recent developments.

Download or read book Continuum Micromechanics written by P. Suquet and published by Springer. This book was released on 2014-05-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent progress of fundamental nature made in the new developed field of micromechanics: transformation field analysis, variational bounds for nonlinear composites, higher-order gradients in micromechanical damage models, dynamics of composites, pattern based variational bounds.

Download or read book Proceedings of the ASME Pressure Vessels and Piping Conference 2006 Materials and fabrication written by and published by . This book was released on 2007 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.

Download or read book Multiscale Methods written by Jacob Fish and published by Oxford University Press. This book was released on 2010 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small scale features and processes occurring at nanometer and femtosecond scales have a profound impact on what happens at a larger scale and over an extensive period of time. The primary objective of this volume is to reflect the state-of-the-art in multiscale mathematics, modeling, and simulations and to address the following barriers: What is the information that needs to be transferred from one model or scale to another and what physical principles must be satisfied during thetransfer of information? What are the optimal ways to achieve such transfer of information? How can variability of physical parameters at multiple scales be quantified and how can it be accounted for to ensure design robustness?The multiscale approaches in space and time presented in this volume are grouped into two main categories: information-passing and concurrent. In the concurrent approaches various scales are simultaneously resolved, whereas in the information-passing methods the fine scale is modeled and its gross response is infused into the continuum scale. The issue of reliability of multiscale modeling and simulation tools which focus on a hierarchy of multiscale models and an a posteriori model of errorestimation including uncertainty quantification, is discussed in several chapters. Component software that can be effectively combined to address a wide range of multiscale simulations is also described. Applications range from advanced materials to nanoelectromechanical systems (NEMS), biologicalsystems, and nanoporous catalysts where physical phenomena operates across 12 orders of magnitude in time scales and 10 orders of magnitude in spatial scales.This volume is a valuable reference book for scientists, engineers and graduate students practicing in traditional engineering and science disciplines as well as in emerging fields of nanotechnology, biotechnology, microelectronics and energy.

Download or read book The Hypercircle in Mathematical Physics written by J. L. Synge and published by Cambridge University Press. This book was released on 2012-03-22 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 1957 book was written to help physicists and engineers solve partial differential equations subject to boundary conditions. The complexities of calculation are illuminated throughout by simple, intuitive geometrical pictures. This book will be of value to anyone with an interest in solutions to boundary value problems in mathematical physics.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1988 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Computational Micromechanics written by Tarek I. Zohdi and published by Springer Science & Business Media. This book was released on 2008-03-15 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this, its second corrected printing, Zohdi and Wriggers’ illuminating text presents a comprehensive introduction to the subject. The authors include in their scope basic homogenization theory, microstructural optimization and multifield analysis of heterogeneous materials. This volume is ideal for researchers and engineers, and can be used in a first-year course for graduate students with an interest in the computational micromechanical analysis of new materials.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2007 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: