Download or read book A Hierarchical Framework for the Multiscale Modeling of Microstructure Evolution in Heterogeneous Materials written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: All materials are heterogeneous at various scales of observation. The influence of material heterogeneity on nonuniform response and microstructure evolution can have profound impact on continuum thermomechanical response at macroscopic "engineering" scales. In many cases, it is necessary to treat this behavior as a multiscale process thus integrating the physical understanding of material behavior at various physical (length and time) scales in order to more accurately predict the thermomechanical response of materials as their microstructure evolves. The intent of the dissertation is to provide a formal framework for multiscale hierarchical homogenization to be used in developing constitutive models.
Download or read book A Hierarchical Framework for the Multiscale Modeling of Microstructure Evolution in Heterogeneous Materials written by Darby J. Luscher and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: All materials are heterogeneous at various scales of observation. The influence of material heterogeneity on nonuniform response and microstructure evolution can have profound impact on continuum thermomechanical response at macroscopic "engineering" scales. In many cases, it is necessary to treat this behavior as a multiscale process. This research developed a hierarchical multiscale approach for modeling microstructure evolution. A theoretical framework for the hierarchical homogenization of inelastic response of heterogeneous materials was developed with a special focus on scale invariance principles needed to assure physical consistency across scales. Within this multiscale framework, the second gradient is used as a nonlocal kinematic link between the response of a material point at the coarse scale and the response of a neighborhood of material points at the fine scale. Kinematic consistency between two scales results in specific requirements for constraints on the fluctuation field. A multiscale internal state variable (ISV) constitutive theory is developed that is couched in the coarse scale intermediate configuration and from which an important new concept in scale transitions emerges, namely scale invariance of dissipation. At the fine scale, the material is treated using finite element models of statistical volume elements of microstructure. The coarse scale is treated using a mixed-field finite element approach. The coarse scale constitutive equations are implemented in a finite deformation hyperelastic inelastic integration scheme developed for second gradient constitutive models. An example problem based on an idealized porous microstructure is presented to illustrate the approach and highlight its predictive utility. This example and a few variations are explored to address the boundary-value-problem dependent nature of length scale parameters employed in nonlocal continuum theories. Finally, strategies for developing meaningful kinematic ISVs, free energy functions, and the associated evolution kinetics are presented. These strategies are centered on the goal of accurately representing the energy stored and dissipated during irreversible processes.
Download or read book Multiscale Modeling of Heterogeneous Structures written by Jurica Sorić and published by Springer. This book was released on 2017-11-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of multiscale approaches and homogenization procedures as well as damage evaluation and crack initiation, and addresses recent advances in the analysis and discretization of heterogeneous materials. It also highlights the state of the art in this research area with respect to different computational methods, software development and applications to engineering structures. The first part focuses on defects in composite materials including their numerical and experimental investigations; elastic as well as elastoplastic constitutive models are considered, where the modeling has been performed at macro- and micro levels. The second part is devoted to novel computational schemes applied on different scales and discusses the validation of numerical results. The third part discusses gradient enhanced modeling, in particular quasi-brittle and ductile damage, using the gradient enhanced approach. The final part addresses thermoplasticity, solid-liquid mixtures and ferroelectric models. The contents are based on the international workshop “Multiscale Modeling of Heterogeneous Structures” (MUMO 2016), held in Dubrovnik, Croatia in September 2016.
Download or read book Mesoscale Models written by Sinisa Mesarovic and published by Springer. This book was released on 2018-11-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book helps to answer the following questions: How far have the understanding and mesoscale modeling advanced in recent decades, what are the key open questions that require further research and what are the mathematical and physical requirements for a mesoscale model intended to provide either insight or a predictive engineering tool? It is addressed to young researchers including doctoral students, postdocs and early career faculty,
Download or read book A Second Gradient Theoretical Framework for Hierarchical Multiscale Modeling of Materials written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A theoretical framework for the hierarchical multiscale modeling of inelastic response of heterogeneous materials has been presented. Within this multiscale framework, the second gradient is used as a non local kinematic link between the response of a material point at the coarse scale and the response of a neighborhood of material points at the fine scale. Kinematic consistency between these scales results in specific requirements for constraints on the fluctuation field. The wryness tensor serves as a second-order measure of strain. The nature of the second-order strain induces anti-symmetry in the first order stress at the coarse scale. The multiscale ISV constitutive theory is couched in the coarse scale intermediate configuration, from which an important new concept in scale transitions emerges, namely scale invariance of dissipation. Finally, a strategy for developing meaningful kinematic ISVs and the proper free energy functions and evolution kinetics is presented.
Download or read book Multiscale Modelling and Optimisation of Materials and Structures written by Tadeusz Burczynski and published by John Wiley & Sons. This book was released on 2022-05-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the very topical, crucial and original subject of parameter identification and optimization within multiscale modeling methods Multiscale Modelling and Optimization of Materials and Structures presents an important and challenging area of research that enables the design of new materials and structures with better quality, strength and performance parameters as well as the creation of reliable models that take into account structural, material and topological properties at different scales. The authors’ approach is four-fold; 1) the basic principles of micro and nano scale modeling techniques; 2) the connection of micro and/or nano scale models with macro simulation software; 3) optimization development in the framework of multiscale engineering and the solution of identification problems; 4) the computer science techniques used in this model and advice for scientists interested in developing their own models and software for multiscale analysis and optimization. The authors present several approaches such as the bridging and homogenization methods, as well as the general formulation of complex optimization and identification problems in multiscale modelling. They apply global optimization algorithms based on robust bioinspired algorithms, proposing parallel and multi-subpopulation approaches in order to speed-up computations, and discuss several numerical examples of multiscale modeling, optimization and identification of composite and functionally graded engineering materials and bone tissues. Multiscale Modelling and Optimization of Materials and Structures is thereby a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs and implement them into simulation systems. Describes micro and nano scale models developed by the authors along with case studies of analysis and optimization Discusses the problems of computing costs, efficiency of information transfer, effective use of the computer memory and several other aspects of development of multiscale models Includes real physical, chemical and experimental studies with modern experimental techniques Provides a valuable source of information for young scientists and students looking to develop their own models, write their own computer programs, and implement them into simulation systems.
Download or read book Materials with Internal Structure written by Patrizia Trovalusci and published by Springer. This book was released on 2015-10-17 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a series of concise papers by researchers specialized in various fields of continuum and computational mechanics and of material science. The focus is on principles and strategies for multiscale modeling and simulation of complex heterogeneous materials, with periodic or random microstructure, subjected to various types of mechanical, thermal, chemical loadings and environmental effects. A wide overview of complex behavior of materials (plasticity, damage, fracture, growth, etc.) is provided. Among various approaches, attention is given to advanced non-classical continua modeling which, provided by constitutive characterization for the internal and external actions (in particular boundary conditions), is a very powerful frame for the gross mechanical description of complex material behaviors, able to circumvent the restrictions of classical coarse–graining multiscale approaches.
Download or read book Multiscale Modeling of Complex Materials written by Tomasz Sadowski and published by Springer. This book was released on 2014-10-14 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume deal with materials science, theoretical mechanics and experimental and computational techniques at multiple scales, providing a sound base and a framework for many applications which are hitherto treated in a phenomenological sense. The basic principles are formulated of multiscale modeling strategies towards modern complex multiphase materials subjected to various types of mechanical, thermal loadings and environmental effects. The focus is on problems where mechanics is highly coupled with other concurrent physical phenomena. Attention is also focused on the historical origins of multiscale modeling and foundations of continuum mechanics currently adopted to model non-classical continua with substructure, for which internal length scales play a crucial role.
Download or read book Multiscale Modeling in Solid Mechanics written by Ugo Galvanetto and published by Imperial College Press. This book was released on 2010 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume presents the state of the art in the field of multiscale modeling in solid mechanics, with particular emphasis on computational approaches. For the first time, contributions from both leading experts in the field and younger promising researchers are combined to give a comprehensive description of the recently proposed techniques and the engineering problems tackled using these techniques. The book begins with a detailed introduction to the theories on which different multiscale approaches are based, with regards to linear Homogenisation as well as various nonlinear approaches. It then presents advanced applications of multiscale approaches applied to nonlinear mechanical problems. Finally, the novel topic of materials with self-similar structure is discussed. Sample Chapter(s). Chapter 1: Computational Homogenisation for Non-Linear Heterogeneous Solids (808 KB). Contents: Computational Homogenisation for Non-Linear Heterogeneous Solids (V G Kouznetsova et al.); Two-Scale Asymptotic Homogenisation-Based Finite Element Analysis of Composite Materials (Q-Z Xiao & B L Karihaloo); Multi-Scale Boundary Element Modelling of Material Degradation and Fracture (G K Sfantos & M H Aliabadi); Non-Uniform Transformation Field Analysis: A Reduced Model for Multiscale Non-Linear Problems in Solid Mechanics (J-C Michel & P Suquet); Multiscale Approach for the Thermomechanical Analysis of Hierarchical Structures (M J Lefik et al.); Recent Advances in Masonry Modelling: Micro-Modelling and Homogenisation (P B Louren o); Mechanics of Materials with Self-Similar Hierarchical Microstructure (R C Picu & M A Soare). Readership: Researchers and academics in the field of heterogeneous materials and mechanical engineering; professionals in aeronautical engineering and materials science.
Download or read book From Microstructure Investigations to Multiscale Modeling written by Delphine Brancherie and published by John Wiley & Sons. This book was released on 2018-01-04 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical behaviors of materials are highly influenced by their architectures and/or microstructures. Hence, progress in material science involves understanding and modeling the link between the microstructure and the material behavior at different scales. This book gathers contributions from eminent researchers in the field of computational and experimental material modeling. It presents advanced experimental techniques to acquire the microstructure features together with dedicated numerical and analytical tools to take into account the randomness of the micro-structure.
Download or read book Computational Methods for Microstructure Property Relationships written by Somnath Ghosh and published by Springer Science & Business Media. This book was released on 2010-11-17 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for Microstructure-Property Relationships introduces state-of-the-art advances in computational modeling approaches for materials structure-property relations. Written with an approach that recognizes the necessity of the engineering computational mechanics framework, this volume provides balanced treatment of heterogeneous materials structures within the microstructural and component scales. Encompassing both computational mechanics and computational materials science disciplines, this volume offers an analysis of the current techniques and selected topics important to industry researchers, such as deformation, creep and fatigue of primarily metallic materials. Researchers, engineers and professionals involved with predicting performance and failure of materials will find Computational Methods for Microstructure-Property Relationships a valuable reference.
Download or read book An Extended Multiscale Principle of Virtual Velocities Approach for Evolving Microstructure written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A hierarchical multiscale approach is presented for modeling microstructure evolution in heterogeneous materials. Preservation of momentum across each scale transition is incorporated through the application of the principle of virtual velocities at the fine scale giving rise to the appropriate continuum momentum balance equations at the coarse scale. In addition to satisfying momentum balance and invariance of momentum among scales, invariance of elastic free energy, stored free energy, and dissipation between two scales of observation is regarded as crucial to the physics of each scale transition. The preservation of this energy partitioning scheme is obtained through construction of constitutive relations within the framework of internal state variable theory. Internal state variables that are directly computed from the fine scale response are introduced to augment the state equations and describe the inelastic energy storage and dissipation within the fine scale. Evolution equations for these internal state variables must be consistent with the observed dissipation at the fine scale. By virtue of a second gradient kinematic decomposition, the framework naturally gives rise to couple stresses.
Download or read book Scientific Modeling and Simulations written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2010-04-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although computational modeling and simulation of material deformation was initiated with the study of structurally simple materials and inert environments, there is an increasing demand for predictive simulation of more realistic material structure and physical conditions. In particular, it is recognized that applied mechanical force can plausibly alter chemical reactions inside materials or at material interfaces, though the fundamental reasons for this chemomechanical coupling are studied in a material-speci c manner. Atomistic-level s- ulations can provide insight into the unit processes that facilitate kinetic reactions within complex materials, but the typical nanosecond timescales of such simulations are in contrast to the second-scale to hour-scale timescales of experimentally accessible or technologically relevant timescales. Further, in complex materials these key unit processes are “rare events” due to the high energy barriers associated with those processes. Examples of such rare events include unbinding between two proteins that tether biological cells to extracellular materials [1], unfolding of complex polymers, stiffness and bond breaking in amorphous glass bers and gels [2], and diffusive hops of point defects within crystalline alloys [3].
Download or read book Multiscale Materials Modelling written by Z. X. Guo and published by Elsevier. This book was released on 2007-05-31 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale materials modelling offers an integrated approach to modelling material behaviour across a range of scales from the electronic, atomic and microstructural up to the component level. As a result, it provides valuable new insights into complex structures and their properties, opening the way to develop new, multi-functional materials together with improved process and product designs. Multiscale materials modelling summarises some of the key techniques and their applications. The various chapters cover the spectrum of scales in modelling methodologies, including electronic structure calculations, mesoscale and continuum modelling. The book covers such themes as dislocation behaviour and plasticity as well as the modelling of structural materials such as metals, polymers and ceramics. With its distinguished editor and international team of contributors, Multiscale materials modelling is a valuable reference for both the modelling community and those in industry wanting to know more about how multiscale materials modelling can help optimise product and process design. Reviews the principles and applications of mult-scale materials modelling Covers themes such as dislocation behaviour and plasticity and the modelling of structural materials Examines the spectrum of scales in modelling methodologies, including electronic structure calculations, mesoscale and continuum modelling
Download or read book Multi scale Modeling and Design of Heterogeneous Nano microstructure for Improved Mechanical Properties written by Mehdi Hamid Vishkasougheh and published by . This book was released on 2019 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of grain boundary back stress field, slip transfer across grain boundaries and grain boundary sliding is analyzed for gradient microstructures under loading conditions like tensile and compression. One of the objectives is to address the existing trade-off between the strength and ductility for metallic materials. A multiscale crystal plasticity based framework is developed and gradient microstructures based on electron back scatter diffraction microscopy results are designed and implemented to the framework. The gradient microstructures are manufactured with severe plastic deformation techniques like high pressure torsion and shot pinning for pure Cu and Mg AZ31. The modeling and experimental mechanical performance of these samples are analyzed. The microstructures are designed by controlling the spatial grain size distribution in the range of a few hundreds of nanometers to tens of micrometers. Several layers with various thicknesses and grain sizes are combined to design these structures. A control voronoi tessellation method is applied for this purpose.The effect of different mechanisms like stress/strain gradient, slip transfer across grain boundaries, back stress field of grain boundaries and grain boundary sliding is studied for different metallic materials like IF (Interstitial Free) steel, Cu, Mg AZ31, and silver with gradient and bi-modal microstructures.The multiscale modeling span is further developed by coupling the stress/strain gradient formulation along with dislocation density evaluation relations to finite element solver as a user materials model to analyze the compression and buckling behavior of 3D printed micropillars as an application for this multiscale modeling framework. The main objective of this part of research is to add the grain size effect, strain rate sensitivity, statistically stored dislocation density effect, and geometrical necessary dislocation density to a continuum mechanics modeling environment. The generic tailor made crystal plasticity based user material model is written in Fortran environment. A parametric study is added to explain the effect of geometrical imperfection/eccentricity along with dislocation density content, grain size and strain rate sensitivity besides the predicted force vs. displacement results are compared with experimental results. The void size, porosity percentage and grain size effect of these AM micropillars are also analyzed and compared with experiments.
Download or read book Multiscale Modeling of Heterogenous Materials written by Oana Cazacu and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: A material's various proprieties is based on its microscopic and nanoscale structures. This book provides an overview of recent advances in computational methods for linking phenomena in systems that span large ranges of time and spatial scales. Particular attention is given to predicting macroscopic properties based on subscale behaviors. Given the book’s extensive coverage of multi-scale methods for modeling both metallic and geologic materials, it will be an invaluable reading for graduate students, scientists, and practitioners alike.
Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.
