Download or read book Computer Aids for VLSI Design written by Steven M. Rubin and published by . This book was released on 2009 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook, originally published in 1987, broadly examines the software required to design electronic circuitry, including integrated circuits. Topics include synthesis and analysis tools, graphics and user interface, memory representation, and more. The book also describes a real system called "Electric."

Download or read book VLSI Design Methodologies for Digital Signal Processing Architectures written by Magdy A. Bayoumi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing VLSI systems represents a challenging task. It is a transfonnation among different specifications corresponding to different levels of design: abstraction, behavioral, stntctural and physical. The behavioral level describes the functionality of the design. It consists of two components; static and dynamic. The static component describes operations, whereas the dynamic component describes sequencing and timing. The structural level contains infonnation about components, control and connectivity. The physical level describes the constraints that should be imposed on the floor plan, the placement of components, and the geometry of the design. Constraints of area, speed and power are also applied at this level. To implement such multilevel transfonnation, a design methodology should be devised, taking into consideration the constraints, limitations and properties of each level. The mapping process between any of these domains is non-isomorphic. A single behavioral component may be transfonned into more than one structural component. Design methodologies are the most recent evolution in the design automation era, which started off with the introduction and subsequent usage of module generation especially for regular structures such as PLA's and memories. A design methodology should offer an integrated design system rather than a set of separate unrelated routines and tools. A general outline of a desired integrated design system is as follows: * Decide on a certain unified framework for all design levels. * Derive a design method based on this framework. * Create a design environment to implement this design method.

Download or read book Design Methodologies for VLSI and Computer Architecture written by Doug A. Edwards and published by North Holland. This book was released on 1989 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital VLSI Systems Design written by Seetharaman Ramachandran and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides step-by-step guidance on how to design VLSI systems using Verilog. It shows the way to design systems that are device, vendor and technology independent. Coverage presents new material and theory as well as synthesis of recent work with complete Project Designs using industry standard CAD tools and FPGA boards. The reader is taken step by step through different designs, from implementing a single digital gate to a massive design consuming well over 100,000 gates. All the design codes developed in this book are Register Transfer Level (RTL) compliant and can be readily used or amended to suit new projects.

Download or read book Handbook of VLSI Chip Design and Expert Systems written by A. F. Schwarz and published by Academic Press. This book was released on 2014-05-10 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of VLSI Chip Design and Expert Systems provides information pertinent to the fundamental aspects of expert systems, which provides a knowledge-based approach to problem solving. This book discusses the use of expert systems in every possible subtask of VLSI chip design as well as in the interrelations between the subtasks. Organized into nine chapters, this book begins with an overview of design automation, which can be identified as Computer-Aided Design of Circuits and Systems (CADCAS). This text then presents the progress in artificial intelligence, with emphasis on expert systems. Other chapters consider the impact of design automation, which exploits the basic capabilities of computers to perform complex calculations and to handle huge amounts of data with a high speed and accuracy. This book discusses as well the characterization of microprocessors. The final chapter deals with interactive I/O devices. This book is a valuable resource for system design experts, circuit analysts and designers, logic designers, device engineers, technologists, and application-specific designers.

Download or read book A Design Methodology for VLSI Processors written by Joan Marie Pendleton and published by . This book was released on 1985 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern VLSI Design written by Wayne Wolf and published by Pearson Education. This book was released on 2002-01-14 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: For Electrical Engineering and Computer Engineering courses that cover the design and technology of very large scale integrated (VLSI) circuits and systems. May also be used as a VLSI reference for professional VLSI design engineers, VLSI design managers, and VLSI CAD engineers. Modern VSLI Design provides a comprehensive “bottom-up” guide to the design of VSLI systems, from the physical design of circuits through system architecture with focus on the latest solution for system-on-chip (SOC) design. Because VSLI system designers face a variety of challenges that include high performance, interconnect delays, low power, low cost, and fast design turnaround time, successful designers must understand the entire design process. The Third Edition also provides a much more thorough discussion of hardware description languages, with introduction to both Verilog and VHDL. For that reason, this book presents the entire VSLI design process in a single volume.

Download or read book VLSI Circuit Design Methodology Demystified written by Liming Xiu and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written to arm engineers qualified and knowledgeable in the area of VLSI circuits with the essential knowledge they need to get into this exciting field and to help those already in it achieve a higher level of proficiency. Few people truly understand how a large chip is developed, but an understanding of the whole process is necessary to appreciate the importance of each part of it and to understand the process from concept to silicon. It will teach readers how to become better engineers through a practical approach of diagnosing and attacking real-world problems.

Download or read book VLSI CAD Tools and Applications written by Wolfgang Fichtner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The summer school on VLSf GAD Tools and Applications was held from July 21 through August 1, 1986 at Beatenberg in the beautiful Bernese Oberland in Switzerland. The meeting was given under the auspices of IFIP WG 10. 6 VLSI, and it was sponsored by the Swiss Federal Institute of Technology Zurich, Switzerland. Eighty-one professionals were invited to participate in the summer school, including 18 lecturers. The 81 participants came from the following countries: Australia (1), Denmark (1), Federal Republic of Germany (12), France (3), Italy (4), Norway (1), South Korea (1), Sweden (5), United Kingdom (1), United States of America (13), and Switzerland (39). Our goal in the planning for the summer school was to introduce the audience into the realities of CAD tools and their applications to VLSI design. This book contains articles by all 18 invited speakers that lectured at the summer school. The reader should realize that it was not intended to publish a textbook. However, the chapters in this book are more or less self-contained treatments of the particular subjects. Chapters 1 and 2 give a broad introduction to VLSI Design. Simulation tools and their algorithmic foundations are treated in Chapters 3 to 5 and 17. Chapters 6 to 9 provide an excellent treatment of modern layout tools. The use of CAD tools and trends in the design of 32-bit microprocessors are the topics of Chapters 10 through 16. Important aspects in VLSI testing and testing strategies are given in Chapters 18 and 19.

Download or read book Algorithmic and Register Transfer Level Synthesis The System Architect s Workbench written by Donald E. Thomas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently there has been increased interest in the development of computer-aided design programs to support the system level designer of integrated circuits more actively. Such design tools hold the promise of raising the level of abstraction at which an integrated circuit is designed, thus releasing the current designers from many of the details of logic and circuit level design. The promise further suggests that a whole new group of designers in neighboring engineering and science disciplines, with far less understanding of integrated circuit design, will also be able to increase their productivity and the functionality of the systems they design. This promise has been made repeatedly as each new higher level of computer-aided design tool is introduced and has repeatedly fallen short of fulfillment. This book presents the results of research aimed at introducing yet higher levels of design tools that will inch the integrated circuit design community closer to the fulfillment of that promise. 1. 1. SYNTHESIS OF INTEGRATED CmCUITS In the integrated circuit (Ie) design process, a behavior that meets certain specifications is conceived for a system, the behavior is used to produce a design in terms of a set of structural logic elements, and these logic elements are mapped onto physical units. The design process is impacted by a set of constraints as well as technological information (i. e. the logic elements and physical units used for the design).

Download or read book Testing and Diagnosis of VLSI and ULSI written by F. Lombardi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers presented at the NATO Advanced Study Institute on ·Testing and Diagnosis of VLSI and ULSI" held at Villa Olmo, Como (Italy) June 22 -July 3,1987. High Density technologies such as Very-Large Scale Integration (VLSI), Wafer Scale Integration (WSI) and the not-so-far promises of Ultra-Large Scale Integration (ULSI), have exasperated the problema associated with the testing and diagnosis of these devices and systema. Traditional techniques are fast becoming obsolete due to unique requirements such as limited controllability and observability, increasing execution complexity for test vector generation and high cost of fault simulation, to mention just a few. New approaches are imperative to achieve the highly sought goal of the • three months· turn around cycle time for a state-of-the-art computer chip. The importance of testing and diagnostic processes is of primary importance if costs must be kept at acceptable levels. The objective of this NATO-ASI was to present, analyze and discuss the various facets of testing and diagnosis with respect to both theory and practice. The contents of this volume reflect the diversity of approaches currently available to reduce test and diagnosis time. These approaches are described in a concise, yet clear way by renowned experts of the field. Their contributions are aimed at a wide readership: the uninitiated researcher will find the tutorial chapters very rewarding. The expert wiII be introduced to advanced techniques in a very comprehensive manner.

Download or read book Digital VLSI Systems written by Mohamed I. Elmasry and published by New York : IEEE Press. This book was released on 1985 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Graphical Engineering Aid for VLSI Systems written by Paul J. Drongowski and published by . This book was released on 1985 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embedded System Design written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.

Download or read book Digital Integrated Circuit Design written by Hubert Kaeslin and published by Cambridge University Press. This book was released on 2008-04-28 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical, tool-independent guide to designing digital circuits takes a unique, top-down approach, reflecting the nature of the design process in industry. Starting with architecture design, the book comprehensively explains the why and how of digital circuit design, using the physics designers need to know, and no more.

Download or read book Expert Systems in Engineering Applications written by Spyros Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert system technology is receiving increasing popularity and acceptance in the engineering community. This is due to the fact that there actually exists a close match between the capabilities of the current generation expert systems and the requirements of engineering practice. Prepared by a distinguished team of experts, this book provides a balanced state-of-the-art presentation of the design principles of engineering expert systems, and a representative picture of their capabilities to assist efficiently the design, diagnosis and operation of complex industrial plants. Among the application areas covered are the following: hardware synthesis, industrial plant layout design, fault diagnosis, process control, image analysis, computer communication, electric power systems, intelligent control, robotics, and manufacturing systems. The book is appropriate for the researcher and the professional. The researcher can save considerable time in searching the scattered technical information on engineering expert systems. The professional can have readily available a rich set of guidelines and techniques that are applicable to a wide class of engineering domains.

Download or read book Readings in Object Oriented Database Systems written by Stanley B. Zdonik and published by Morgan Kaufmann. This book was released on 1990 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive collection is a survey of research in object-oriented databases, offering a substantive overview of the field, section introductions, and over 40 research papers presented in their original scope and detail. The balanced selection of articles presents a confluence of ideas from both the language and database research communities that have contributed to the object-oriented paradigm. The editors develop a general definition and model for object-oriented databases and relate significant research efforts to this framework. Further, the collection explores the fundamental notions behind object-oriented databases, semantic data models, implementation of object-oriented systems, transaction processing, interfaces, and related approaches. Research and theory are balanced by applications to CAD systems, programming environments, and office information systems.