Download or read book 5G NR Wi Fi 6 and Bluetooth LE 5 written by Douglas H Morais and published by Springer Nature. This book was released on 2023-06-30 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides, at a high level and in a tractable fashion, a description of how wireless communications are achieved in the latest smartphones. The author shows how smartphones communicate via three separate systems, namely 5G NR, Wi-Fi 6, and Bluetooth Low Energy 5. He explains how 5G NR allows mobile voice and high-speed data communication, how Wi-Fi allows smartphone attachment to the Internet independent of 5G NR, and how Bluetooth allows smartphone attachment to speakers, in-car entertainment systems, smart watches, etc. This text explains the key basic technologies employed and then addresses how each system operates. This book is of interest to anyone with a rudimentary scientific understanding who desires to know more at an intuitive level rather than rigorous one how smartphones achieve wireless communications.

Download or read book Key 5G 5G Advanced Physical Layer Technologies written by Douglas H. Morais and published by Springer Nature. This book was released on with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Key 5G 5G Advanced Physical Layer Technologies written by Douglas H. Morais and published by Springer. This book was released on 2024-07-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of this text covers the key technologies associated with the physical transmission of data on 5G mobile systems. Following an updated overview of these technologies, the author provides a high-level description of 3GPP’s mobile communications standard (5G/5G-Advanced) and shows how the key technologies presented earlier facilitate the transmission of very high-speed user data and control data and can provide very low latency for use cases where this is important. In the final chapter, an updated overview and the physical layer aspects of 5G NR enabled Fixed Wireless Access (FWA) networks is presented. Material in the second edition addressed mainly the key physical layer technologies and features associated with 3GPP Release 15, the first release to support 5G, and Release 16. This edition adds descriptions of some of the technological advancements supported in Releases 17 and 18, the latter being designated by 3GPP as 5G-Advanced. In addition to numerous enhancements of existing features, these releases include new features such as support for 1024-QAM in the downlink in the FR1 band, Reduced Capability (RedCAP) devices, Network Controlled repeaters, operation in the 6 GHz band and above 52.6 GHz, support for broadcast/multicast services, and Non-terrestrial Networks (NTNs). Additionally, a look ahead at some of the planned features and enhancements of Release 19 is provided. This textbook is intended for graduate and upper undergraduate engineering students and practicing engineers and technicians who have an interest in 3GPP’s 5G enabled mobile and or FWA networks and want to acquire, where missing, the necessary technology background in order to understand 3GPP’s physical layer specifications and operation. Provided are working problems and helpful examples throughout the text.

Download or read book Wireless Communications written by Andreas F. Molisch and published by John Wiley & Sons. This book was released on 2022-11-15 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth and comprehensive treatment of wireless communication technology ranging from the fundamentals to the newest research results The expanded and completely revised Third Edition of Wireless Communications delivers an essential text in wireless communication technology that combines mathematical descriptions with intuitive explanations of the physical facts that enable readers to acquire a deep understanding of the subject. This latest edition includes brand-new sections on cutting edge research topics such as massive MIMO, polar codes, heterogeneous networks, non-orthogonal multiple access, as well as 5G cellular standards, WiFi 6, and Bluetooth Low Energy. Together with the re-designed descriptions of fundamentals such as fading, OFDM, and multiple access, it provides a thorough treatment of all the technologies that underlie fifth-generation and beyond systems. A complimentary companion website provides readers with a wealth of old and new material, including instructor resources available upon request. Readers will also find: A thorough introduction to the applications and requirements of modern wireless services, including video streaming, virtual reality, and Internet of Things. Comprehensive explorations of wireless propagation mechanisms and channel models, ranging from Rayleigh fading to advanced models for MIMO communications. Detailed discussions of single-user communications fundamentals, including modern coding techniques, multi-carrier communications, and single-user MIMO. Extensive description of multi-user communications, including packet radio systems, CDMA, scheduling, admission control, cellular and ad-hoc network design, and multi-user MIMO. In-depth examinations of advanced topics in wireless communication, like speech and video coding, cognitive radio, NOMA, network coding, and wireless localization. A comprehensive description of the key wireless standards, including LTE, 5G, WiFi, Bluetooth, and an outlook to Beyond 5G systems. Perfect for advanced undergraduate and graduate students with a basic knowledge of standard communications, Wireless Communications will also earn a place in the libraries of researchers and system designers seeking a one-stop resource on wireless communication technology.

Download or read book Wireless Internet written by Leandros A. Maglaras and published by Springer Nature. This book was released on with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Distributed Computing and Machine Learning written by Suchismita Chinara and published by Springer Nature. This book was released on 2023-06-27 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of peer-reviewed best selected research papers presented at the Fourth International Conference on Advances in Distributed Computing and Machine Learning (ICADCML 2023), organized by Department of Computer Science and Engineering, National Institute of Technology, Rourkela, Odisha, India, during 15–16 January 2023. This book presents recent innovations in the field of scalable distributed systems in addition to cutting edge research in the field of Internet of Things (IoT) and blockchain in distributed environments.

Download or read book Applicability of 5G NR and Wi Fi Technologies in the Aerospace Industry Sector industry 4 0 written by Antoni Gallardo Llorca and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this project, some of the Industry 4.0 technologies are evaluated in order to verify if they can be applied in aerospace industry scenarios. It is proposed to implement an scenario in which various wireless-connected tools assist workers in a maintenance hangar at Barcelona El Prat-Josep Tarradellas airport. To validate these technologies on the mentioned scenario, a simulation is performed by a network simulator called ns-3, which can simulate all the protocol stack of different wireless communication standards. This simulator provides a set of performance indicators the must comply with the performance requirements of the wireless-connected tools. A first simulation is performed with an scenario created to run a series of tests, following the parameters defined by 3GPP for the 5th Generation New Radio $($5G-NR$)$ standard, to ensure that the obtained results are consistent and acceptable. Then, a simulation based on the modeling of the commented realistic maintenance scenario with multiple variations according to the standard specification is performed. The scenario is simulated by approximating its dimensions and the number of workers working there, and so, the amount of wireless-connected devices. A number of connected devices is proposed, and the simulation is performed to obtain network performances results of multiple variations of some of the deployment parameters and technical features parameters of 5G-NR that affect the wireless links (links between base stations and wireless-connected devices) and so the devices performances. Lastly, performance data from all the simulation variations is collected, and the variation which offers best performances for every simulation configuration is chosen to determine whether the devices requirements are met or not. In some cases, some configurations do not comply with the requirements. This project also compares performances of the current 3GPP standard, 4th Generation Long Term Evolution Advanced (4G-LTE) Advanced, with 5G-NR, which shows that 4G-LTE specification can not satisfy the simulated network requirements.

Download or read book Cloud IoT Systems for Smart Agricultural Engineering written by Saravanan Krishnan and published by CRC Press. This book was released on 2022-02-13 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agriculture plays a vital role in a country’s growth. Modern-day technologies drive every domain toward smart systems. The use of traditional agricultural procedures to satisfy modern-day requirements is a challenging task. Cloud IoT Systems for Smart Agricultural Engineering provides substantial coverage of various challenges of the agriculture domain through modern technologies such as the Internet of Things (IoT), cloud computing, and many more. This book offers various state-of-the-art procedures to be deployed in a wide range of agricultural activities. The concepts are discussed with the necessary implementations and clear examples. Necessary illustrations are depicted in the chapters to ensure the effective delivery of the proposed concepts. It presents the rapid advancement of the technologies in the existing agricultural model by applying the cloud IoT techniques. A wide variety of novel architectural solutions are discussed in various chapters of this book. This book provides comprehensive coverage of the most essential topics, including: New approaches on urban and vertical farming Smart crop management for Indian farmers Smart livestock management Precision agriculture using geographical information systems Machine learning techniques combined with IoT for smart agriculture Effective use of drones in smart agriculture This book provides solutions for the diverse domain of problems in agricultural engineering. It can be used at the basic and intermediary levels for agricultural science and engineering graduate students, researchers, and practitioners.

Download or read book Demystifying Internet of Things Security written by Sunil Cheruvu and published by Apress. This book was released on 2019-08-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Break down the misconceptions of the Internet of Things by examining the different security building blocks available in Intel Architecture (IA) based IoT platforms. This open access book reviews the threat pyramid, secure boot, chain of trust, and the SW stack leading up to defense-in-depth. The IoT presents unique challenges in implementing security and Intel has both CPU and Isolated Security Engine capabilities to simplify it. This book explores the challenges to secure these devices to make them immune to different threats originating from within and outside the network. The requirements and robustness rules to protect the assets vary greatly and there is no single blanket solution approach to implement security. Demystifying Internet of Things Security provides clarity to industry professionals and provides and overview of different security solutions What You'll Learn Secure devices, immunizing them against different threats originating from inside and outside the network Gather an overview of the different security building blocks available in Intel Architecture (IA) based IoT platforms Understand the threat pyramid, secure boot, chain of trust, and the software stack leading up to defense-in-depth Who This Book Is For Strategists, developers, architects, and managers in the embedded and Internet of Things (IoT) space trying to understand and implement the security in the IoT devices/platforms.

Download or read book From GSM to LTE Advanced Pro and 5G written by Martin Sauter and published by John Wiley & Sons. This book was released on 2017-08-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comparative introduction to major global wireless standards, technologies and their applications From GSM to LTE-Advanced Pro and 5G: An Introduction to Mobile Networks and Mobile Broadband, 3rd Edition provides technical descriptions of the various wireless technologies currently in use. It explains the rationales behind their differing mechanisms and implementations while exploring the advantages and limitations of each technology. This edition has been fully updated and substantially expanded to reflect the significant evolution in mobile network technology occurring over the past several years. The chapter on LTE has been extensively enhanced with new coverage of current implementations of LTE carrier aggregation, mobility management, cell reselection and handover procedures, as well as the latest developments in 5G radio and core networks in 3GPP. It now features additional information on the TD-LTE air interface, IPv6 in mobile networks, Network Function Virtualization (NFV) and Narrowband Internet of Things (NB-IOT). Voice-over-LTE (VoLTE) is now treated extensively in a separate chapter featuring coverage of the VoLTE call establishment process, dedicated bearer setup, header compression, speech codec and bandwidth negotiation, supplementary service configuration and VoLTE emergency calls. In addition, extensive coverage of Voice-over-Wifi and mission critical communication for public safety organizations over LTE has been added. The WLAN chapter now provides coverage of WPA2-Professional with certificates for authentication in large deployments, such as the global Eduroam network and the new WLAN 60 GHz air interface. Bluetooth evolution has been addressed by including a detailed description of Bluetooth Low Energy (BLE) in the chapter devoted to Bluetooth. Describes the different systems based on the standards, their practical implementation and design assumptions, and the performance and capacity of each system in practice is analyzed and explained Questions at the end of each chapter and answers on the accompanying website make this book ideal for self-study or as course material.

Download or read book Internet of Things and Sensors Networks in 5G Wireless Communications written by Lei Zhang and published by MDPI. This book was released on 2020-01-24 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic.

Download or read book 5G for the Connected World written by Devaki Chandramouli and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Handbook Demystifies 5G for Technical and Business Professionals in Mobile Telecommunication Fields Much is being said regarding the possibilities and capabilities of the emerging 5G technology, as the evolution towards 5G promises to transform entire industries and many aspects of our society. 5G for the Connected World offers a comprehensive technical overview that telecommunication professionals need to understand and take advantage of these developments. The book offers a wide-ranging coverage of the technical aspects of 5G (with special consideration of the 3GPP Release 15 content), how it enables new services and how it differs from LTE. This includes information on potential use cases, aspects of radio and core networks, spectrum considerations and the services primarily driving 5G development and deployment. The text also looks at 5G in relation to the Internet of Things, machine to machine communication and technical enablers such as LTE-M, NB-IoT and EC-GSM. Additional chapters discuss new business models for telecommunication service providers and vertical industries as a result of introducing 5G and strategies for staying ahead of the curve. Other topics include: Key features of the new 5G radio such as descriptions of new waveforms, massive MIMO and beamforming technologies as well as spectrum considerations for 5G radio regarding all possible bands Drivers, motivations and overview of the new 5G system – especially RAN architecture and technology enablers (e.g. service-based architecture, compute-storage split and network exposure) for native cloud deployments Mobile edge computing, Non-3GPP access, Fixed-Mobile Convergence Detailed overview of mobility management, session management and Quality of Service frameworks 5G security vision and architecture Ultra-low latency and high reliability use cases and enablers, challenges and requirements (e.g. remote control, industrial automation, public safety and V2X communication) An outline of the requirements and challenges imposed by massive numbers of devices connected to cellular networks While some familiarity with the basics of 3GPP networks is helpful, 5G for the Connected World is intended for a variety of readers. It will prove a useful guide for telecommunication professionals, standardization experts, network operators, application developers and business analysts (or students working in these fields) as well as infrastructure and device vendors looking to develop and integrate 5G into their products, and to deploy 5G radio and core networks.

Download or read book Location Based Services in Cellular Networks from GSM to 5G NR written by Adrián Cardalda García and published by Artech House. This book was released on 2020-07-31 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exciting new book delivers a comprehensive overview of the cellular network architecture, with focus on the positioning applications and emergency call services, and covers aspects brought by 5G, including the core virtualization and the network slicing to optimize cellular network deployments. Focus is given to the different positioning technologies used in cellular networks, divided in satellite positioning, terrestrial radio positioning, non-RF positioning and a brief introduction to sensor fusion and Bayesian theory. It provides an overview of all the positioning technologies used in cellular networks, from GSM to 5G, from RAT independent technologies, such as A-GNSS (including GNSS evolution, RTK and PPP), WiFi, Bluetooth and sensor fusion, to cellular network native technologies, such as OTDOA / DL-TDOA, ECID, multi-cell RTT and the Angle Of Arrival (AOA) based techniques that take advantage of 5G mmWave beamforming features. Different positioning protocols, especially the LTE Positioning Protocol (LPP), which is used for LTE and 5G NR and defines the communication between the user device (mobile phone, connected vehicle, etc.) and the base station are explained extensively, and compares it with other competing protocols such as OMA LPPE. Furthermore, it also explains the core network positioning protocols (LPPa, NRPPa), that describe the communication between the location server and the core network. Explanation of different signaling parameters will enable the reader to understand better how positioning works in a cellular network. The contents of this book are aimed at all types of users, from beginners to the concept of positioning to experts that are looking to enhance their knowledge of positioning in cellular networks.

Download or read book 5G NR written by Sassan Ahmadi and published by Academic Press. This book was released on 2019-06-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5G NR: Architecture, Technology, Implementation, and Operation of 3GPP New Radio Standards is an in-depth, systematic, technical reference on 3GPP's New Radio standards (Release 15 and beyond), covering the underlying theory, functional descriptions, practical considerations and implementation of the 5G new radio access technology. The book describes the design and operation of individual components and shows how they are integrated into the overall system and operate from a systems perspective. Uniquely, this book gives detailed information on RAN protocol layers, transport, network architecture and services, as well as practical implementation and deployment issues, making it suitable for researchers and engineers who are designing and developing 5G systems. Reflecting on the author's 30 plus years of experience in signal processing, microelectronics and wireless communication system design, this book is ideal for professional engineers, researchers and graduate students working and researching in cellular communication systems and protocols as well as mobile broadband wireless standards. Strong focus on practical considerations, implementation and deployment issues Takes a top-down approach to explain system operation and functional interconnection Covers all functional components, features, and interfaces based on clear protocol structure and block diagrams Describes RF and transceiver design considerations in sub-6 GHz and mmWave bands Covers network slicing, SDN/NFV/MEC networks and cloud and virtualized RAN architectures Comprehensive coverage of NR multi-antenna techniques and beamformed operation A consistent and integrated coverage reflecting the author’s decades of experience in developing 3G, 4G and 5G technologies and writing two successful books in these areas

Download or read book Internet of Things IoT in 5G Mobile Technologies written by Constandinos X. Mavromoustakis and published by Springer. This book was released on 2016-04-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest advances in the modeling, analysis and efficient management of information in Internet of Things (IoT) applications in the context of 5G access technologies. It presents cutting-edge applications made possible by the implementation of femtocell networks and millimeter wave communications solutions, examining them from the perspective of the universally and constantly connected IoT. Moreover, it describes novel architectural approaches to the IoT and presents the new framework possibilities offered by 5G mobile networks, including middleware requirements, node-centrality and the location of extensive functionalities at the edge. By providing researchers and professionals with a timely snapshot of emerging mobile communication systems, and highlighting the main pitfalls and potential solutions, the book fills an important gap in the literature and will foster the further developments of 5G hosting IoT devices.

Download or read book Wireless Communications written by Andrea Goldsmith and published by Cambridge University Press. This book was released on 2005-08-08 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless technology is a truly revolutionary paradigm shift, enabling multimedia communications between people and devices from any location. It also underpins exciting applications such as sensor networks, smart homes, telemedicine, and automated highways. This book provides a comprehensive introduction to the underlying theory, design techniques and analytical tools of wireless communications, focusing primarily on the core principles of wireless system design. The book begins with an overview of wireless systems and standards. The characteristics of the wireless channel are then described, including their fundamental capacity limits. Various modulation, coding, and signal processing schemes are then discussed in detail, including state-of-the-art adaptive modulation, multicarrier, spread spectrum, and multiple antenna techniques. The concluding chapters deal with multiuser communications, cellular system design, and ad-hoc network design. Design insights and tradeoffs are emphasized throughout the book. It contains many worked examples, over 200 figures, almost 300 homework exercises, over 700 references, and is an ideal textbook for students.

Download or read book Fundamentals of 5G Mobile Networks written by Jonathan Rodriguez and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of 5G Mobile Networks provides an overview of the key features of the 5th Generation (5G) mobile networks, discussing the motivation for 5G and the main challenges in developing this new technology. This book provides an insight into the key areas of research that will define this new system technology paving the path towards future research and development. The book is multi-disciplinary in nature, and aims to cover a whole host of intertwined subjects that will predominantly influence the 5G landscape, including the future Internet, cloud computing, small cells and self-organizing networks (SONs), cooperative communications, dynamic spectrum management and cognitive radio, Broadcast-Broadband convergence , 5G security challenge, and green RF. This book aims to be the first of its kind towards painting a holistic perspective on 5G Mobile, allowing 5G stakeholders to capture key technology trends on different layering domains and to identify potential inter-disciplinary design aspects that need to be solved in order to deliver a 5G Mobile system that operates seamlessly.