Download or read book 2nd fib Congress in Naples Italy Vol1 written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2006-06-01 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2nd fib Congress in Naples Italy Vol2 written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2006-06-01 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Procedures for the Use of Composites in Strengthening of Reinforced Concrete Structures written by Carlo Pellegrino and published by Springer. This book was released on 2015-08-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses the current knowledge on structural behaviour of RC elements and structures strengthened with composite materials (experimental, analytical and numerical approaches for EBR and NSM), particularly in relation to the above topics, and the comparison of the predictions of the current available codes/recommendations/guidelines with selected experimental results. The book shows possible critical issues (discrepancies, lacunae, relevant parameters, test procedures, etc.) related to current code predictions or to evaluate their reliability, in order to develop more uniform methods and basic rules for design and control of FRP strengthened RC structures. General problems/critical issues are clarified on the basis of the actual experiences, detect discrepancies in existing codes, lacunae in knowledge and, concerning these identified subjects, provide proposals for improvements. The book will help to contribute to promote and consolidate a more qualified and conscious approach towards rehabilitation and strengthening existing RC structures with composites and their possible monitoring.
Download or read book Shear and Punching Shear in RC and FRC Elements written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-12-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 57 is a collection of contributions from a workshop on "Recent developments on shear and punching shear in RC and FRC elements", held in Salò, Italy, in October 2010. Shear is one of a few areas of research into fundamentals of the behaviour of concrete structures where contention remains amongst researchers. There is a continuing debate between researchers from a structures perspective and those from a materials or fracture mechanics perspective about the mechanisms that enable the force flow through a concrete member and across cracks. In 2009, a Working Group was formed within fib Task Group 4.2 "Ultimate Limit State Models" to harmonise different ideas about design procedures for shear and punching. An important outcome of this work was the ensuing discussions between experts and practitioners regarding the shear and punching provisions of the draft fib Model Code, which led to the organization of the Salò workshop. Invited experts in the field of shear and FRC gave 18 lectures at the workshop that was attended by 72 participants from 12 countries in 3 different continents. The contributions from this conference as compiled in this bulletin are believed to represent the best of the current state of knowledge. They certainly are of general interest to fib members and especially helpful in the finalization of the 2010 fibModel Code. It is hoped that this publication will stimulate further research in the field, to refine and harmonize the available analytical models and tools for shear and punching design.
Download or read book Handbook of International Bridge Engineering written by Wai-Fah Chen and published by CRC Press. This book was released on 2013-10-11 with total page 1413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and up-to-date reference work and resource book covers state-of-the-art and state-of-the-practice for bridge engineering worldwide. Countries covered include Canada and the United States in North America; Argentina and Brazil in South America; Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Greece, Macedonia, Poland, Russia, Serbia, Slovakia, and Ukraine in the European continent; China, Indonesia, Japan, Chinese Taipei, and Thailand in Asia; and Egypt, Iran, and Turkey in the Middle East. The book examines the use of different materials for each region, including stone, timber, concrete, steel, and composite. It examines various bridge types, including slab, girder, segmental, truss, arch, suspension, and cable-stayed. A color insert illustrates select landmark bridges. It also presents ten benchmark comparisons for highway composite girder design from different countries; the highest bridges; the top 100 longest bridges, and the top 20 longest bridge spans for various bridge types including suspension, cable-stayed, extradosed, arch, girder, movable bridges (vertical lift, swing, and bascule), floating, stress ribbon, and timber; and bridge construction methods.
Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 4442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials). Some contributions present the latest insights and new understanding on (i) the mechanics of structures and systems (dynamics, vibration, seismic response, instability, buckling, soil-structure interaction), and (ii) the mechanics of materials and fluids (elasticity, plasticity, fluid-structure interaction, flow through porous media, biomechanics, fracture, fatigue, bond, creep, shrinkage). Other contributions report on (iii) recent advances in computational modelling and testing (numerical simulations, finite-element modeling, experimental testing), and (iv) developments and innovations in structural engineering (planning, analysis, design, construction, assembly, maintenance, repair and retrofitting of structures). Insights and Innovations in Structural Engineering, Mechanics and Computation is particularly of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find the content useful. Short versions of the papers, intended to be concise but self-contained summaries of the full papers, are collected in the book, while the full versions of the papers are on the accompanying CD.
Download or read book Computational Modelling of Concrete Structures written by Nenad Bicanic and published by CRC Press. This book was released on 2014-03-04 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St Anton am Alberg 2014) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and concrete structures. The conference reviews and discusses research advancements and the applicability and robustness of methods and models for reliable analysis of complex concrete, reinforced concrete and pre-stressed concrete structures in engineering practice. Conference topics and invited papers cover both computational mechanics and computational modelling aspects of the analysis and design of concrete and concrete structures: * Constitutive and Multiscale Modelling of Concrete * Advances in Computational Modelling * Time Dependent and Multiphysics Problems * Performance of Concrete Structures The book is of special interest to researchers in computational concrete mechanics, as well as industry experts in complex nonlinear simulations of concrete structures.
Download or read book Bulletin of the New Zealand Society for Earthquake Engineering written by and published by . This book was released on 2006 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The National Union Catalog Pre 1956 Imprints written by and published by . This book was released on 1968 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conference on Structural Implications of Shrinkage and Creep of Concrete at the ACI Fall 2007 Convention written by N. John Gardner and published by . This book was released on 2007 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bond of Reinforcement in Concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2000-01-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In 1993, the CEB Commission 2 Material and Behavior Modelling established the Task Group 2.5 Bond Models. It's terms of reference were ... to write a state-of-art report concerning bond of reinforcement in concrete and later recommend how the knowledge could be applied in practice (Model Code like text proposal)... {This work} covers the first part ... the state-of-art report."--Pref.
Download or read book The National Union Catalog Pre 1956 Imprints written by Library of Congress and published by . This book was released on 1970 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tunnels and Underground Cities Engineering and Innovation Meet Archaeology Architecture and Art written by Daniele Peila and published by CRC Press. This book was released on 2019-04-17 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art contains the contributions presented at the World Tunnel Congress 2019 (Naples, Italy, 3-9 May 2019). The use of underground space is continuing to grow, due to global urbanization, public demand for efficient transportation, and energy saving, production and distribution. The growing need for space at ground level, along with its continuous value increase and the challenges of energy saving and achieving sustainable development objectives, demand greater and better use of the underground space to ensure that it supports sustainable, resilient and more liveable cities. This vision was the source of inspiration for the design of the logos of both the International (ITA) and Italian (SIG) Tunnelling Association. By placing key infrastructures underground – the black circle in the logos – it will be possible to preserve and enhance the quality of the space at ground level – the green line. In order to consider and value underground space usage together with human and social needs, engineers, architects, and artists will have to learn to collaborate and develop an interdisciplinary design approach that addresses functionality, safety, aesthetics and quality of life, and adaptability to future and varied functions. The 700 contributions cover a wide range of topics, from more traditional subjects connected to technical challenges of design and construction of underground works, with emphasis on innovation in tunneling engineering, to less conventional and archetypically Italian themes such as archaeology, architecture, and art. The book has the following main themes: Archaeology, Architecture and Art in underground construction; Environment sustainability in underground construction; Geological and geotechnical knowledge and requirements for project implementation; Ground improvement in underground constructions; Innovation in underground engineering, materials and equipment; Long and deep tunnels; Public communication and awareness; Risk management, contracts and financial aspects; Safety in underground construction; Strategic use of underground space for resilient cities; Urban tunnels. Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art is a valuable reference text for tunneling specialists, owners, engineers, architects and others involved in underground planning, design and building around the world, and for academics who are interested in underground constructions and geotechnics.
Download or read book Catalog of the Avery Memorial Architectural Library of Columbia University written by Avery Library and published by . This book was released on 1968 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Researching the History of Mathematics Education written by Fulvia Furinghetti and published by Springer. This book was released on 2017-12-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers insights into the history of mathematics education, covering both the current state of the art of research and the methodology of the field. History of mathematics education is treated in the book as a part of social history. This book grew out of the presentations delivered at the International Congress on Mathematics Education in Hamburg. Modern development and growing internationalization of mathematics education made it clear that many urgent questions benefit from a historical approach. The chapters present viewpoints from the following countries: Belgium, Brazil, Cambodia, China, Cyprus, Germany, Iceland, Italy, the Netherlands, Russia,Spain and Sweden. Each chapter represents significant directions of historical studies. The book is a valuable source for every historian of mathematics education and those interested in mathematics education and its development.
Download or read book Catalogue of the Harvard University Fine Arts Library the Fogg Art Museum written by Harvard University. Fine Arts Library and published by . This book was released on 1971 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dictionary Catalog of the Research Libraries of the New York Public Library 1911 1971 written by New York Public Library. Research Libraries and published by . This book was released on 1979 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
