Download or read book 2013 14th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering STA written by IEEE Staff and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation STA 2013 is intended as an international forum where an effective exchange of knowledge and experience amongst active researchers in various theoretical and applied areas of automatic control and computer engineering can take place Participation of engineers and other scientists from industry is particularly welcome This event will provide the opportunity, for worldwide researchers and practitioners, to share together the latest developments and trends in systems and control Both theoretical and applied papers are welcome for submission to this event Keynote speeches are to be conducted by experts.

Download or read book 2013 14th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering STA 2013 written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2013 14th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering STA 2013 written by and published by . This book was released on 2013 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Control Applications Volume 2 written by Salim Ziani and published by Springer Nature. This book was released on with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 1st International Conference on Electronic Engineering and Renewable Energy written by Bekkay Hajji and published by Springer. This book was released on 2018-08-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.

Download or read book Systems Automation and Control written by Nabil Derbel and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-04 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth volume of the Series Advances in Systems, Signals and Devices, is dedicated to fields related to Systems, Automation and Control. The scope of this issue encompasses all aspects of the research, development and applications of the science and technology in these fields. Topics of this issue concern: system design, system identification, biological and economical models & control, modern control theory, nonlinear observers, control and application of chaos, adaptive/non-adaptive backstepping control techniques, advances in linear control theory, systems optimization, multivariable control, large scale and infinite dimension systems, nonlinear control, distributed control, predictive control, geometric control, adaptive control, optimal and stochastic control, robust control, neural control, fuzzy control, intelligent control systems, diagnostics, fault tolerant control, robotics and mechatronics, navigation, robotics and human-machine interaction, hierarchical and man-machine systems, etc. Authors are encouraged to submit novel contributions which include results of research or experimental work discussing new developments in the field of systems, automation and control. The series can be also addressed for editing special issues for novel developments in specific fields. The aim of this volume is to promote an international scientific progress in the fields of systems, automation and control. It provides at the same time an opportunity to be informed about interesting results that have been reported during the international SSD conferences.

Download or read book Automation Control and Energy Efficiency in Complex Systems written by Hamid Khayyam and published by MDPI. This book was released on 2020-12-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at serving researchers, engineers, scientists, and engineering graduate and PhD students of engineering and physical science together with individuals interested in engineering and science. This book focuses on the application of engineering methods to complex systems including transportation, building, and manufacturing, with approaches representing a wide variety of disciplines of engineering and science. Throughout the book, great emphases are placed on engineering applications of complex systems, as well as the methodologies of automation, including artificial intelligence, automated and intelligent control, energy analysis, energy modelling, energy management, and optimised energy efficiency. The significant impact of recent studies that have been selected for presentation are of high interest in engineering complex systems. An attempt has been made to expose the reading audience of engineers and researchers to a broad range of theoretical and practical topics. The topics contained in the present book are of specific interest to engineers who are seeking expertise in transportation, building, and manufacturing technologies as well as mathematical modelling of complex systems, engineering approaches to engineering complex problems, automation via artificial intelligence methods, automated and intelligent control, and energy systems. The primary audience of this book are researchers, graduate students, and engineers in mechanical engineering, control engineering, computer engineering, electrical engineering, and science disciplines. In particular, the book can be used for training graduate and PhD students as well as senior undergraduate students to enhance their knowledge by taking a graduate or advanced undergraduate course in the areas of complex systems, control systems, energy systems, and engineering applications. The covered research topics are also of interest to engineers and academia who are seeking to expand their expertise in these areas.

Download or read book ICCCE 2020 written by Amit Kumar and published by Springer Nature. This book was released on 2020-10-11 with total page 1561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of research papers and articles presented at the 3rd International Conference on Communications and Cyber-Physical Engineering (ICCCE 2020), held on 1-2 February 2020 at CMR Engineering College, Hyderabad, Telangana, India. Discussing the latest developments in voice and data communication engineering, cyber-physical systems, network science, communication software, image and multimedia processing research and applications, as well as communication technologies and other related technologies, it includes contributions from both academia and industry. This book is a valuable resource for scientists, research scholars and PG students working to formulate their research ideas and find the future directions in these areas. Further, it may serve as a reference work to understand the latest engineering and technologies used by practicing engineers in the field of communication engineering.

Download or read book Proceedings of the 4th International Conference on Electrical Engineering and Control Applications written by Sofiane Bououden and published by Springer Nature. This book was released on 2020-09-29 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented during the 4th International Conference on Electrical Engineering and Control Applications. It covers new control system models, troubleshooting tips and complex system requirements, such as increased speed, precision and remote capabilities. Additionally, the papers discuss not only the engineering aspects of signal processing and various practical issues in the broad field of information transmission, but also novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers and advanced postgraduate students in the fields of control and electrical engineering, computer science and signal processing, as well as mechanical and chemical engineering.

Download or read book IMDC IST 2021 written by Abd-Alhameed Raed and published by European Alliance for Innovation. This book was released on 2022-01-26 with total page 1790 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the Second International Conference on Integrated Sciences and Technologies (IMDC-IST-2021). Where held on 7th–9th Sep 2021 in Sakarya, Turkey. This conference was organized by University of Bradford, UK and Southern Technical University, Iraq. The papers in this conference were collected in a proceedings book entitled: Proceedings of the second edition of the International Multi-Disciplinary Conference Theme: “Integrated Sciences and Technologies” (IMDC-IST-2021). The presentation of such a multi-discipline conference provides a lot of exciting insights and new understanding on recent issues in terms of Green Energy, Digital Health, Blended Learning, Big Data, Meta-material, Artificial-Intelligence powered applications, Cognitive Communications, Image Processing, Health Technologies, 5G Communications. Referring to the argument, this conference would serve as a valuable reference for future relevant research activities. The committee acknowledges that the success of this conference are closely intertwined by the contributions from various stakeholders. As being such, we would like to express our heartfelt appreciation to the keynote speakers, invited speakers, paper presenters, and participants for their enthusiastic support in joining the second edition of the International Multi-Disciplinary Conference Theme: “Integrated Sciences and Technologies” (IMDC-IST-2021). We are convinced that the contents of the study from various papers are not only encouraged productive discussion among presenters and participants but also motivate further research in the relevant subject. We appreciate for your enthusiasm to attend our conference and share your knowledge and experience. Your input was important in ensuring the success of our conference. Finally, we hope that this conference serves as a forum for learning in building togetherness and academic networks. Therefore, we expect to see you all at the next IMDC-IST.

Download or read book Proceedings of the Future Technologies Conference FTC 2018 written by Kohei Arai and published by Springer. This book was released on 2018-10-19 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book, presenting the proceedings of the 2018 Future Technologies Conference (FTC 2018), is a remarkable collection of chapters covering a wide range of topics, including, but not limited to computing, electronics, artificial intelligence, robotics, security and communications and their real-world applications. The conference attracted a total of 503 submissions from pioneering researchers, scientists, industrial engineers, and students from all over the world. After a double-blind peer review process, 173 submissions (including 6 poster papers) have been selected to be included in these proceedings. FTC 2018 successfully brought together technology geniuses in one venue to not only present breakthrough research in future technologies but to also promote practicality and applications and an intra- and inter-field exchange of ideas. In the future, computing technologies will play a very important role in the convergence of computing, communication, and all other computational sciences and applications. And as a result it will also influence the future of science, engineering, industry, business, law, politics, culture, and medicine. Providing state-of-the-art intelligent methods and techniques for solving real-world problems, as well as a vision of the future research, this book is a valuable resource for all those interested in this area.

Download or read book Photonic Interconnects for Computing Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2022-09-01 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, there has been a considerable amount of effort, both in industry and academia, focusing on the design, implementation, performance analysis, evaluation and prediction of silicon photonic interconnects for inter- and intra-chip communication, paving the way for the design and dimensioning of the next and future generation of high-performance computing systems. Photonic Interconnects for Computing Systems provides a comprehensive overview of the current state-of-the-art technology and research achievements in employing silicon photonics for interconnection networks and high-performance computing, summarizing main opportunities and some challenges. The majority of the chapters were collected from presentations made at the International Workshop on Optical/Photonic Interconnects for Computing Systems (OPTICS) held over the past two years. The workshop invites internationally recognized speakers on the range of topics relevant to silicon photonics and computing systems. Technical topics discussed in the book include:Design and Implementation of Chip-Scale Photonic Interconnects;Developing Design Automation Solutions for Chip-Scale Photonic Interconnects;Design Space Exploration in Chip-Scale Photonic Interconnects;Thermal Analysis and Modeling in Photonic Interconnects;Design for Reliability;Fabrication Non-Uniformity in Photonic Interconnects;Photonic Interconnects for Computing Systems presents a compilation of outstanding contributions from leading research groups in the field. It presents a comprehensive overview of the design, advantages, challenges, and requirements of photonic interconnects for computing systems. The selected contributions present important discussions and approaches related to the design and development of novel photonic interconnect architectures, as well as various design solutions to improve the performance of such systems while considering different challenges. The book is ideal for personnel in computer/photonic industries as well as academic staff and master/graduate students in computer science and engineering, electronic engineering, electrical engineering and photonics.

Download or read book Intelligent Computing Applications for Sustainable Real World Systems written by Manjaree Pandit and published by Springer Nature. This book was released on 2020-04-03 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delves into various solution paradigms such as artificial neural network, support vector machine, wavelet transforms, evolutionary computing, swarm intelligence. During the last decade, novel solution technologies based on human and species intelligence have gained immense popularity due to their flexible and unconventional approach. New analytical tools are also being developed to handle big data processing and smart decision making. The idea behind compiling this work is to familiarize researchers, academicians, industry persons and students with various applications of intelligent techniques for producing sustainable, cost-effective and robust solutions of frequently encountered complex, real-world problems in engineering and science disciplines. The practical problems in smart grids, communication, waste management, elimination of harmful elements from nature, etc., are identified, and smart and optimal solutions are proposed.

Download or read book Recent Advances in Power Electronics and Drives written by Shailendra Kumar and published by Springer Nature. This book was released on 2022-05-26 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains select proceedings of EPREC-2021 with a focus on power electronics and drives. The book includes original research and case studies that present recent developments in power electronics focusing on power inverters and converters. The book also consists of research work on electrical drives, regulated power supplies, operation of FACTS & HVDC, etc. The book will be a valuable reference guide for beginners, researchers, and professionals interested in the advancements of power electronics and drives.

Download or read book Conference Proceedings of ICDLAIR2019 written by Meenakshi Tripathi and published by Springer Nature. This book was released on 2021-02-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book includes the results from the International Conference on Deep Learning, Artificial Intelligence and Robotics, held in Malaviya National Institute of Technology, Jawahar Lal Nehru Marg, Malaviya Nagar, Jaipur, Rajasthan, 302017. The scope of this conference includes all subareas of AI, with broad coverage of traditional topics like robotics, statistical learning and deep learning techniques. However, the organizing committee expressly encouraged work on the applications of DL and AI in the important fields of computer/electronics/electrical/mechanical/chemical/textile engineering, health care and agriculture, business and social media and other relevant domains. The conference welcomed papers on the following (but not limited to) research topics: · Deep Learning: Applications of deep learning in various engineering streams, neural information processing systems, training schemes, GPU computation and paradigms, human–computer interaction, genetic algorithm, reinforcement learning, natural language processing, social computing, user customization, embedded computation, automotive design and bioinformatics · Artificial Intelligence: Automatic control, natural language processing, data mining and machine learning tools, fuzzy logic, heuristic optimization techniques (membrane-based separation, wastewater treatment, process control, etc.) and soft computing · Robotics: Automation and advanced control-based applications in engineering, neural networks on low powered devices, human–robot interaction and communication, cognitive, developmental and evolutionary robotics, fault diagnosis, virtual reality, space and underwater robotics, simulation and modelling, bio-inspired robotics, cable robots, cognitive robotics, collaborative robotics, collective and social robots and humanoid robots It was a collaborative platform for academic experts, researchers and corporate professionals for interacting their research in various domain of engineering like robotics, data acquisition, human–computer interaction, genetic algorithm, sentiment analysis as well as usage of AI and advanced computation in various industrial challenges based applications such as user customization, augmented reality, voice assistants, reactor design, product formulation/synthesis, embedded system design, membrane-based separation for protecting environment along with wastewater treatment, rheological properties estimation for Newtonian and non-Newtonian fluids used in micro-processing industries and fault detection.

Download or read book Diagnosis Fault Detection Tolerant Control written by Nabil Derbel and published by Springer Nature. This book was released on 2020-02-20 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on unhealthy cyber-physical systems. Consisting of 14 chapters, it discusses recognizing the beginning of the fault, diagnosing the appearance of the fault, and stopping the system or switching to a special control mode known as fault-tolerant control. Each chapter includes the background, motivation, quantitative development (equations), and case studies/illustration/tutorial (simulations, experiences, curves, tables, etc.). Readers can easily tailor the techniques presented to accommodate their ad hoc applications.

Download or read book Intelligent Robotics and Applications written by Haibin Yu and published by Springer. This book was released on 2019-08-02 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume set LNAI 11740 until LNAI 11745 constitutes the proceedings of the 12th International Conference on Intelligent Robotics and Applications, ICIRA 2019, held in Shenyang, China, in August 2019. The total of 378 full and 25 short papers presented in these proceedings was carefully reviewed and selected from 522 submissions. The papers are organized in topical sections as follows: Part I: collective and social robots; human biomechanics and human-centered robotics; robotics for cell manipulation and characterization; field robots; compliant mechanisms; robotic grasping and manipulation with incomplete information and strong disturbance; human-centered robotics; development of high-performance joint drive for robots; modular robots and other mechatronic systems; compliant manipulation learning and control for lightweight robot. Part II: power-assisted system and control; bio-inspired wall climbing robot; underwater acoustic and optical signal processing for environmental cognition; piezoelectric actuators and micro-nano manipulations; robot vision and scene understanding; visual and motional learning in robotics; signal processing and underwater bionic robots; soft locomotion robot; teleoperation robot; autonomous control of unmanned aircraft systems. Part III: marine bio-inspired robotics and soft robotics: materials, mechanisms, modelling, and control; robot intelligence technologies and system integration; continuum mechanisms and robots; unmanned underwater vehicles; intelligent robots for environment detection or fine manipulation; parallel robotics; human-robot collaboration; swarm intelligence and multi-robot cooperation; adaptive and learning control system; wearable and assistive devices and robots for healthcare; nonlinear systems and control. Part IV: swarm intelligence unmanned system; computational intelligence inspired robot navigation and SLAM; fuzzy modelling for automation, control, and robotics; development of ultra-thin-film, flexible sensors, and tactile sensation; robotic technology for deep space exploration; wearable sensing based limb motor function rehabilitation; pattern recognition and machine learning; navigation/localization. Part V: robot legged locomotion; advanced measurement and machine vision system; man-machine interactions; fault detection, testing and diagnosis; estimation and identification; mobile robots and intelligent autonomous systems; robotic vision, recognition and reconstruction; robot mechanism and design. Part VI: robot motion analysis and planning; robot design, development and control; medical robot; robot intelligence, learning and linguistics; motion control; computer integrated manufacturing; robot cooperation; virtual and augmented reality; education in mechatronics engineering; robotic drilling and sampling technology; automotive systems; mechatronics in energy systems; human-robot interaction.