Download or read book 1981 Advances in Aerospace Structures and Materials written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1981 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Fracture Research written by K. Salama and published by Elsevier. This book was released on 2013-10-22 with total page 3063 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held every four years, the International Congress on Fracture is the premier international forum for the exchange of ideas between scientists and engineers involved in producing and using materials resistant to fracture and fatigue. This major six-volume work which forms the proceedings of the Seventh International Congress on Fracture therefore provides the most comprehensive account available of the current status of research into fracture and fatigue, and the application of this knowledge to the design, fabrication and operation of materials and structures. As such, it will be an essential reference for materials scientists and mechanical, structural, aeronautical and design engineers with an interest in fracture and its prevention.
Download or read book High Pressure Shock Compression of Solids written by J.R. Asay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a set of basic understandings of the behavior and response of solids to propagating shock waves. The propagation of shock waves in a solid body is accompanied by large compressions, decompression, and shear. Thus, the shear strength of solids and any inelastic response due to shock wave propagation is of the utmost importance. Furthermore, shock compres sion of solids is always accompanied by heating, and the rise of local tempera ture which may be due to both compression and dissipation. For many solids, under a certain range of impact pressures, a two-wave structure arises such that the first wave, called the elastic prescursor, travels with the speed of sound; and the second wave, called a plastic shock wave, travels at a slower speed. Shock-wave loading of solids is normally accomplished by either projectile impact, such as produced by guns or by explosives. The shock heating and compression of solids covers a wide range of temperatures and densities. For example, the temperature may be as high as a few electron volts (1 eV = 11,500 K) for very strong shocks and the densification may be as high as four times the normal density.
Download or read book Non Linear Fracture written by W.G. Knauss and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: From time to time the International Journal of Fracture has presented special matters thought to be of interest to its readers. In previous issues, for example, Dr. H.W. Liu as Guest Editor assembled a series of review papers dealing with fatigue processes and characteristics in metals and non-metals (December 1980 and April 1981). Five years ago Guest Editor W.G. Knauss collected works dealing with dynamic fracture (March and April 1985). Continuing this policy, Dr. W.G. Knauss and Dr. A.J. Rosakis of the California Institute of Technology as Guest Editors have now organized an extensive set of papers concerning the influence of non-linear effects upon the mechanics of the fracture process. This collection is based upon contributions to a relatively small international Symposium on Non Linear Fracture Mechanics held under the auspices of the International Union of Theoretical and Applied Mechanics (IUTAM) and convened at the California Institute of Technology in March 1988. It should be noted that although the description of non-linear fracture inherently encompasses a strong material science component, this aspect is not heavily emphasized in the ensuing papers due to the intentional focus upon mechanics. Volume 42 of the International Journal of Fracture will therefore, in successive issues, deal respectively with topics in (1) Damage, (2) Interfaces and Creep, (3) Time Dependence, and (4) Continuum Plasticity. On behalf of the editors and publishers, I wish to express our appreciation to Dr. Knauss, Dr. Rosakis, and their colleagues for their collective efforts.
Download or read book Theoretical foundation for large scale computations for nonlinear material behavior written by S. Nemat-Nassar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of a workshop on the Theoretical Founda tion for Large-Scale Computations of Nonlinear Material Behavior, held under the auspices of the National Science Foundation (NSF) and the Defense Advance Re search Projects Agency (DARPA), at Northwestern University, October 24-26, 1983. The main objective of this workshop was to provide a forum for the exchange of information and views on major issues relating to the fundamentals of character izing the inelastic constitutive material behavior. Comments on the Aims of the Workshop, by Drs. William Snowden and Thomas Bache, pp. 1-5, outline reasons for holding this workshop, and provide further background. The format of the workshop was designed to optimize the interaction between researchers whose primary interest is material characterization and numerical analysts whose primary interest is the development and practical use of large computer codes. The program of the workshop and a list of the workshop partic ipants are found at the end of these proceedings.
Download or read book Inelastic Deformation of Composite Materials written by George J. Dvorak and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites were introduced for the aerospace industry as light, strong, stiff materials, and adopted by the construction and automobile industries, among others. Meanwhile, composite materials have been introduced to fulfill the uses that these conventional materials could not, such as in extreme environments. The research for new composites includes not only new polymer systems, but metals, ceramics and intermetallic systems as well. This volume contains a selection of recent work by leading researchers in micromechanics on the topics of prediction of overall properties of elastic, perfectly bonded systems, problems associated with inelastic deformation of the phase, debonding at interfaces and growth of distributed damage. Many familiar aspects of mechanical behavior, such as fatigue, fracture, strength and buckling, etc. have been reexamined and adapted for these new systems.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1983 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ice Structure Interaction written by Stephen J. Jones and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: IUTAM-IAHR Symposium on Ice-Structure Interaction Professor Bez Tabarrok, Chairman of the Canadian National Committee (CNC) of the International Union of Theoretical and Applied Mechanics (IUTAM) invited Professor Derek Muggeridge to organize a symposium on ice structure interaction. Dr. Muggeridge readily agreed and prepared a proposal that was endorsed by the CNC and presented to the General Assembly Meeting of IUTAM for their consideration. This Assembly gave its approval and provided the local organizing committee with the names of individuals who were willing to serve on the Scientific Committee. Dr. Muggeridge became chairman of this committee and Dr. Ian Jordaan became co-chairman of this committee as well as chairman of the local organizing committee. The symposium followed the very successful previous meeting, chaired by Professor P. Tryde in Copenhagen, by ten years. Both symposia uti lized Springer-Verlag to publish their proceedings. The Faculty of En gineering and Applied Science at Memorial University of Newfoundland were particul{lXly pleased to host this prestigious symposium as it marked the twentieth anniversary of its Ocean Engineering Research Centre.
Download or read book Handbook of Materials Behavior Models Three Volume Set written by Jean LeMaitre and published by Elsevier. This book was released on 2001-11-17 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first of a kind reference/handbook deals with nonlinear models and properties of material. In the study the behavior of materials' phenomena no unique laws exist. Therefore, researchers often turn to models to determine the properties of materials. This will be the first book to bring together such a comprehensive collection of these models. The Handbook deals with all solid materials, and is organized first by phenomena. Most of the materials models presented in an applications-oriented fashion, less descriptive and more practitioner-geared, making it useful in the daily working activities of professionals. The Handbook is divided into three volumes. Volume I, Deformation of Materials, introduces general methodologies in the art of modeling, in choosing materials, and in the "so-called" size effect. Chapters 2-5 deal respectively with elasticity and viscoelasticity, yield limit, plasticity, and visco-plasticity. Volume II, Failures in Materials, provides models on such concerns as continuous damage, cracking and fracture, and friction wear. Volume III, Multiphysics Behavior, deals with multiphysics coupled behaviors. Chapter's 10 and 11 are devoted to special classes of materials (composites, biomaterials, and geomaterials). The different sections within each chapter describe one model each with its domain of validity, its background, its formulation, the identification of material parameters for as many materials as possible, and advice on how to implement or use the model. The study of the behavior of materials, especially solids, is related to hundreds of areas in engineering design and control. Predicting how a material will perform under various conditions is essential to determining the optimal performance of machines and vehicles and the structural integrity of buildings, as well as safety issues. Such practical examples would be how various new materials, such as those used in new airplane hulls, react to heat or cold or sudden temperature changes, or how new building materials hold up under extreme earthquake conditions. The Handbook of Materials Behavior Models: Gathers together 117 models of behavior of materials written by the most eminent specialists in their field Presents each model's domain of validity, a short background, its formulation, a methodology to identify the materials parameters, advise on how to use it in practical applications as well as extensive references Covers all solid materials: metals, alloys, ceramics, polymers, composites, concrete, wood, rubber, geomaterials such as rocks, soils, sand, clay, biomaterials, etc Concerns all engineering phenomena: elasticity, viscoelasticity, yield limit, plasticity, viscoplasticity, damage, fracture, friction, and wear
Download or read book Modeling and Design of Flexible Pavements and Materials written by Dallas N. Little and published by Springer. This book was released on 2017-09-25 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook lays out the state of the art for modeling of asphalt concrete as the major structural component of flexible pavements. The text adopts a pedagogy in which a scientific approach, based on materials science and continuum mechanics, predicts the performance of any configuration of flexible roadways subjected to cyclic loadings. The authors incorporate state-of the-art computational mechanics to predict the evolution of material properties, stresses and strains, and roadway deterioration. Designed specifically for both students and practitioners, the book presents fundamentally complex concepts in a clear and concise way that aids the roadway design community to assimilate the tools for designing sustainable roadways using both traditional and innovative technologies.
Download or read book Index of Conference Proceedings Received written by British Library. Lending Division and published by . This book was released on 1986-07 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Aspects of Penetration Mechanics written by J. Chandra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elastic Plastic Fracture Mechanics written by Lars Hannes Larsson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 4th Advanced Seminar on Fracture Mechanics, Joint Research Centre, Ispra, Italy, October 24-28, 1983
Download or read book Long term Behavior of Composites written by T. Kevin O'Brien and published by ASTM International. This book was released on 1983 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reflective Cracking in Pavements written by J.M. Rigo and published by CRC Press. This book was released on 2014-04-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms the Proceedings of the Second International RILEM Conference held in Liege in March 1993. It follows the successful first conference held in 1989 and focusses on two main topics: the current state of the art of reflective cracking in highway and other pavements, and design recommendations for field applications. As well as more than
Download or read book Composite Materials written by and published by . This book was released on 1984 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Time Dependent and Nonlinear Effects in Polymers and Composites written by Richard Allan Schapery and published by ASTM International. This book was released on 2000 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Improved reliability in commercial and military applications requires improved understanding of and predictive models for the time- dependent and nonlinear mechanical behavior of polymeric composites. The May 1998 American Society for Testing and Materials symposium sought to fuse the efforts in this direction of specialists in polymers and composites; these 18 papers are therefore grouped under the subheadings of polymers and composites. Primary polymer topics are chemical and physical aging, nonlinear viscoelasticity, and viscoplasticity. Composites' issues include: the effect of physical aging on time-dependent behavior, multiaxial nonlinear effects, compressive behavior, nonlinear viscoelasticity and viscoplasticity, failure mechanisms, hygrothermal effects, durability, and accelerated strength testing. Schapery is affiliated with the U. of Texas at Austin, and Sun is at Purdue U. Annotation copyrighted by Book News, Inc., Portland, OR.
